Fixed Issue 69.
3 Version: MPL 1.1/GPL 2.0/LGPL 2.1
5 The contents of this file are subject to the Mozilla Public License Version
6 1.1 (the "License"); you may not use this file except in compliance with
7 the License. You may obtain a copy of the License at
9 http://www.mozilla.org/MPL/
11 Software distributed under the License is distributed on an "AS IS" basis,
12 WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
13 for the specific language governing rights and limitations under the License.
15 The Original Code is the Open Hardware Monitor code.
17 The Initial Developer of the Original Code is
18 Michael Möller <m.moeller@gmx.ch>.
19 Portions created by the Initial Developer are Copyright (C) 2009-2010
20 the Initial Developer. All Rights Reserved.
24 Alternatively, the contents of this file may be used under the terms of
25 either the GNU General Public License Version 2 or later (the "GPL"), or
26 the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
27 in which case the provisions of the GPL or the LGPL are applicable instead
28 of those above. If you wish to allow use of your version of this file only
29 under the terms of either the GPL or the LGPL, and not to allow others to
30 use your version of this file under the terms of the MPL, indicate your
31 decision by deleting the provisions above and replace them with the notice
32 and other provisions required by the GPL or the LGPL. If you do not delete
33 the provisions above, a recipient may use your version of this file under
34 the terms of any one of the MPL, the GPL or the LGPL.
39 using System.Collections.Generic;
40 using System.Configuration;
44 namespace OpenHardwareMonitor.Hardware.TBalancer {
45 public class TBalancer : IHardware {
47 private int portIndex;
48 private FT_HANDLE handle;
50 private byte protocolVersion;
51 private Sensor[] digitalTemperatures = new Sensor[8];
52 private Sensor[] analogTemperatures = new Sensor[4];
53 private Sensor[] sensorhubTemperatures = new Sensor[6];
54 private Sensor[] sensorhubFlows = new Sensor[2];
55 private Sensor[] fans = new Sensor[4];
56 private Sensor[] controls = new Sensor[4];
57 private Sensor[] miniNGTemperatures = new Sensor[4];
58 private Sensor[] miniNGFans = new Sensor[4];
59 private List<ISensor> active = new List<ISensor>();
60 private List<ISensor> deactivating = new List<ISensor>();
61 private int[] primaryData = new int[0];
62 private int[] alternativeData = new int[0];
64 public const byte STARTFLAG = 100;
65 public const byte ENDFLAG = 254;
67 private delegate void MethodDelegate();
68 private MethodDelegate alternativeRequest;
70 public TBalancer(int portIndex, byte protocolVersion) {
71 this.portIndex = portIndex;
72 this.icon = Utilities.EmbeddedResources.GetImage("bigng.png");
73 this.protocolVersion = protocolVersion;
75 ParameterDescription[] parameter = new ParameterDescription[] {
76 new ParameterDescription("Offset [°C]", "Temperature offset.", 0)
79 for (int i = 0; i < digitalTemperatures.Length; i++)
80 digitalTemperatures[i] = new Sensor("Digital Sensor " + i,
81 offset + i, SensorType.Temperature, this, parameter);
82 offset += digitalTemperatures.Length;
84 for (int i = 0; i < analogTemperatures.Length; i++)
85 analogTemperatures[i] = new Sensor("Analog Sensor " + (i + 1),
86 offset + i, SensorType.Temperature, this, parameter);
87 offset += analogTemperatures.Length;
89 for (int i = 0; i < sensorhubTemperatures.Length; i++)
90 sensorhubTemperatures[i] = new Sensor("Sensorhub Sensor " + i,
91 offset + i, SensorType.Temperature, this, parameter);
92 offset += sensorhubTemperatures.Length;
94 for (int i = 0; i < miniNGTemperatures.Length; i++)
95 miniNGTemperatures[i] = new Sensor("miniNG #" + (i / 2 + 1) +
96 " Sensor " + (i % 2 + 1), offset + i, SensorType.Temperature,
98 offset += miniNGTemperatures.Length;
100 for (int i = 0; i < sensorhubFlows.Length; i++)
101 sensorhubFlows[i] = new Sensor("Flowmeter " + (i + 1),
102 i, SensorType.Flow, this, new ParameterDescription[] {
103 new ParameterDescription("Impulse Rate",
104 "The impulse rate of the flowmeter in pulses/L", 509)
107 for (int i = 0; i < controls.Length; i++) {
108 controls[i] = new Sensor("Fan Channel " + i, i,
109 SensorType.Control, this, null);
110 ActivateSensor(controls[i]);
113 alternativeRequest = new MethodDelegate(DelayedAlternativeRequest);
119 private void ActivateSensor(Sensor sensor) {
120 deactivating.Remove(sensor);
121 if (!active.Contains(sensor)) {
123 if (SensorAdded != null)
128 private void DeactivateSensor(Sensor sensor) {
129 if (deactivating.Contains(sensor)) {
130 active.Remove(sensor);
131 deactivating.Remove(sensor);
132 if (SensorRemoved != null)
133 SensorRemoved(sensor);
134 } else if (active.Contains(sensor)) {
135 deactivating.Add(sensor);
139 private void ReadminiNG(int[] data, int number) {
140 int offset = 1 + number * 65;
142 if (data[offset + 61] != ENDFLAG)
145 for (int i = 0; i < 2; i++) {
146 Sensor sensor = miniNGTemperatures[number * 2 + i];
147 if (data[offset + 7 + i] > 0) {
148 sensor.Value = 0.5f * data[offset + 7 + i] +
149 sensor.Parameters[0].Value;
150 ActivateSensor(sensor);
152 DeactivateSensor(sensor);
156 for (int i = 0; i < 2; i++) {
157 float maxRPM = 20.0f * data[offset + 44 + 2 * i];
159 if (miniNGFans[number * 2 + i] == null)
160 miniNGFans[number * 2 + i] =
161 new Sensor("miniNG #" + (number + 1) + " Fan Channel " + (i + 1),
162 4 + number * 2 + i, SensorType.Fan, this, null);
164 Sensor sensor = miniNGFans[number * 2 + i];
166 sensor.Value = 20.0f * data[offset + 43 + 2 * i];
167 ActivateSensor(sensor);
171 private void ReadData() {
172 int[] data = new int[285];
173 for (int i = 0; i < data.Length; i++)
174 data[i] = FTD2XX.ReadByte(handle);
176 if (data[0] != STARTFLAG) {
177 FTD2XX.FT_Purge(handle, FT_PURGE.FT_PURGE_RX);
181 if (data[1] == 255 || data[1] == 88) { // bigNG
183 if (data[274] != protocolVersion)
186 this.primaryData = data;
188 for (int i = 0; i < digitalTemperatures.Length; i++)
189 if (data[238 + i] > 0) {
190 digitalTemperatures[i].Value = 0.5f * data[238 + i] +
191 digitalTemperatures[i].Parameters[0].Value;
192 ActivateSensor(digitalTemperatures[i]);
194 DeactivateSensor(digitalTemperatures[i]);
197 for (int i = 0; i < analogTemperatures.Length; i++)
198 if (data[260 + i] > 0) {
199 analogTemperatures[i].Value = 0.5f * data[260 + i] +
200 analogTemperatures[i].Parameters[0].Value;
201 ActivateSensor(analogTemperatures[i]);
203 DeactivateSensor(analogTemperatures[i]);
206 for (int i = 0; i < sensorhubTemperatures.Length; i++)
207 if (data[246 + i] > 0) {
208 sensorhubTemperatures[i].Value = 0.5f * data[246 + i] +
209 sensorhubTemperatures[i].Parameters[0].Value;
210 ActivateSensor(sensorhubTemperatures[i]);
212 DeactivateSensor(sensorhubTemperatures[i]);
215 for (int i = 0; i < sensorhubFlows.Length; i++)
216 if (data[231 + i] > 0 && data[234] > 0) {
217 float pulsesPerSecond = (data[231 + i] * 4.0f) / data[234];
218 float pulsesPerLiter = sensorhubFlows[i].Parameters[0].Value;
219 sensorhubFlows[i].Value = pulsesPerSecond * 3600 / pulsesPerLiter;
220 ActivateSensor(sensorhubFlows[i]);
222 DeactivateSensor(sensorhubFlows[i]);
225 for (int i = 0; i < fans.Length; i++) {
226 float maxRPM = 11.5f * ((data[149 + 2 * i] << 8) | data[148 + 2 * i]);
229 fans[i] = new Sensor("Fan Channel " + i, i, SensorType.Fan,
230 this, new ParameterDescription[] {
231 new ParameterDescription("MaxRPM",
232 "Maximum revolutions per minute (RPM) of the fan.", maxRPM)
236 if ((data[136] & (1 << i)) == 0) // pwm mode
237 value = 0.02f * data[137 + i];
239 value = 0.01f * data[141 + i];
241 fans[i].Value = fans[i].Parameters[0].Value * value;
242 ActivateSensor(fans[i]);
244 controls[i].Value = 100 * value;
247 } else if (data[1] == 253) { // miniNG #1
248 this.alternativeData = data;
252 if (data[66] == 252) // miniNG #2
262 get { return "T-Balancer bigNG"; }
265 public Identifier Identifier {
266 get { return new Identifier("bigng", this.portIndex.ToString()); }
269 public IHardware[] SubHardware {
270 get { return new IHardware[0]; }
273 public ISensor[] Sensors {
274 get { return active.ToArray(); }
277 public string GetReport() {
278 StringBuilder r = new StringBuilder();
280 r.AppendLine("T-Balancer bigNG");
282 r.Append("Port Index: "); r.AppendLine(portIndex.ToString());
285 r.AppendLine("Primary System Information Answer");
287 r.AppendLine(" 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F");
289 for (int i = 0; i <= 0x11; i++) {
290 r.Append(" "); r.Append((i << 4).ToString("X3")); r.Append(" ");
291 for (int j = 0; j <= 0xF; j++) {
292 int index = ((i << 4) | j);
293 if (index < primaryData.Length) {
295 r.Append(primaryData[index].ToString("X2"));
302 if (alternativeData.Length > 0) {
303 r.AppendLine("Alternative System Information Answer");
305 r.AppendLine(" 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F");
307 for (int i = 0; i <= 0x11; i++) {
308 r.Append(" "); r.Append((i << 4).ToString("X3")); r.Append(" ");
309 for (int j = 0; j <= 0xF; j++) {
310 int index = ((i << 4) | j);
311 if (index < alternativeData.Length) {
313 r.Append(alternativeData[index].ToString("X2"));
324 private void DelayedAlternativeRequest() {
325 System.Threading.Thread.Sleep(500);
326 FTD2XX.Write(handle, new byte[] { 0x37 });
330 FTD2XX.FT_Open(portIndex, out handle);
331 FTD2XX.FT_SetBaudRate(handle, 19200);
332 FTD2XX.FT_SetDataCharacteristics(handle, 8, 1, 0);
333 FTD2XX.FT_SetFlowControl(handle, FT_FLOW_CONTROL.FT_FLOW_RTS_CTS, 0x11,
335 FTD2XX.FT_SetTimeouts(handle, 1000, 1000);
336 FTD2XX.FT_Purge(handle, FT_PURGE.FT_PURGE_ALL);
339 public void Update() {
340 while (FTD2XX.BytesToRead(handle) >= 285)
342 if (FTD2XX.BytesToRead(handle) == 1)
343 FTD2XX.ReadByte(handle);
345 FTD2XX.Write(handle, new byte[] { 0x38 });
346 alternativeRequest.BeginInvoke(null, null);
349 public void Close() {
350 FTD2XX.FT_Close(handle);
353 public event SensorEventHandler SensorAdded;
354 public event SensorEventHandler SensorRemoved;
356 public void Accept(IVisitor visitor) {
357 visitor.VisitHardware(this);
360 public void Traverse(IVisitor visitor) { }