Added ISA bus mutex support to the super IO detection.
3 Version: MPL 1.1/GPL 2.0/LGPL 2.1
5 The contents of this file are subject to the Mozilla Public License Version
6 1.1 (the "License"); you may not use this file except in compliance with
7 the License. You may obtain a copy of the License at
9 http://www.mozilla.org/MPL/
11 Software distributed under the License is distributed on an "AS IS" basis,
12 WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
13 for the specific language governing rights and limitations under the License.
15 The Original Code is the Open Hardware Monitor code.
17 The Initial Developer of the Original Code is
18 Michael Möller <m.moeller@gmx.ch>.
19 Portions created by the Initial Developer are Copyright (C) 2009-2010
20 the Initial Developer. All Rights Reserved.
24 Alternatively, the contents of this file may be used under the terms of
25 either the GNU General Public License Version 2 or later (the "GPL"), or
26 the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
27 in which case the provisions of the GPL or the LGPL are applicable instead
28 of those above. If you wish to allow use of your version of this file only
29 under the terms of either the GPL or the LGPL, and not to allow others to
30 use your version of this file under the terms of the MPL, indicate your
31 decision by deleting the provisions above and replace them with the notice
32 and other provisions required by the GPL or the LGPL. If you do not delete
33 the provisions above, a recipient may use your version of this file under
34 the terms of any one of the MPL, the GPL or the LGPL.
39 using System.Collections.Generic;
43 namespace OpenHardwareMonitor.Hardware.LPC {
44 public class IT87XX : ISuperIO {
46 private ushort address;
50 private readonly ushort addressReg;
51 private readonly ushort dataReg;
53 private float?[] voltages = new float?[0];
54 private float?[] temperatures = new float?[0];
55 private float?[] fans = new float?[0];
58 private const byte ITE_VENDOR_ID = 0x90;
60 // Environment Controller
61 private const byte ADDRESS_REGISTER_OFFSET = 0x05;
62 private const byte DATA_REGISTER_OFFSET = 0x06;
64 // Environment Controller Registers
65 private const byte CONFIGURATION_REGISTER = 0x00;
66 private const byte TEMPERATURE_BASE_REG = 0x29;
67 private const byte VENDOR_ID_REGISTER = 0x58;
68 private const byte FAN_TACHOMETER_16_BIT_ENABLE_REGISTER = 0x0c;
69 private byte[] FAN_TACHOMETER_REG =
70 new byte[] { 0x0d, 0x0e, 0x0f, 0x80, 0x82 };
71 private byte[] FAN_TACHOMETER_EXT_REG =
72 new byte[] { 0x18, 0x19, 0x1a, 0x81, 0x83 };
73 private const byte VOLTAGE_BASE_REG = 0x20;
75 private byte ReadByte(byte register, out bool valid) {
76 WinRing0.WriteIoPortByte(addressReg, register);
77 byte value = WinRing0.ReadIoPortByte(dataReg);
78 valid = register == WinRing0.ReadIoPortByte(addressReg);
82 public IT87XX(Chip chip, ushort address, byte version) {
84 this.address = address;
86 this.version = version;
87 this.addressReg = (ushort)(address + ADDRESS_REGISTER_OFFSET);
88 this.dataReg = (ushort)(address + DATA_REGISTER_OFFSET);
92 byte vendorId = ReadByte(VENDOR_ID_REGISTER, out valid);
93 if (!valid || vendorId != ITE_VENDOR_ID)
96 // Bit 0x10 of the configuration register should always be 1
97 if ((ReadByte(CONFIGURATION_REGISTER, out valid) & 0x10) == 0)
102 voltages = new float?[9];
103 temperatures = new float?[3];
104 fans = new float?[5];
107 public Chip Chip { get { return chip; } }
108 public float?[] Voltages { get { return voltages; } }
109 public float?[] Temperatures { get { return temperatures; } }
110 public float?[] Fans { get { return fans; } }
112 public string GetReport() {
113 StringBuilder r = new StringBuilder();
115 r.AppendLine("LPC " + this.GetType().Name);
117 r.Append("Chip ID: 0x"); r.AppendLine(chip.ToString("X"));
118 r.Append("Chip Version: 0x"); r.AppendLine(version.ToString("X"));
119 r.Append("Base Address: 0x"); r.AppendLine(address.ToString("X4"));
122 if (!WinRing0.WaitIsaBusMutex(100))
125 r.AppendLine("Environment Controller Registers");
127 r.AppendLine(" 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F");
129 for (int i = 0; i <= 0xA; i++) {
130 r.Append(" "); r.Append((i << 4).ToString("X2")); r.Append(" ");
131 for (int j = 0; j <= 0xF; j++) {
134 byte value = ReadByte((byte)((i << 4) | j), out valid);
136 r.Append(value.ToString("X2"));
144 WinRing0.ReleaseIsaBusMutex();
149 public void Update() {
150 if (!WinRing0.WaitIsaBusMutex(10))
153 for (int i = 0; i < voltages.Length; i++) {
155 float value = 0.001f * ((int)ReadByte(
156 (byte)(VOLTAGE_BASE_REG + i), out valid) << 4);
165 for (int i = 0; i < temperatures.Length; i++) {
167 sbyte value = (sbyte)ReadByte(
168 (byte)(TEMPERATURE_BASE_REG + i), out valid);
172 if (value < sbyte.MaxValue && value > 0)
173 temperatures[i] = value;
175 temperatures[i] = null;
178 for (int i = 0; i < fans.Length; i++) {
180 int value = ReadByte(FAN_TACHOMETER_REG[i], out valid);
183 value |= ReadByte(FAN_TACHOMETER_EXT_REG[i], out valid) << 8;
188 fans[i] = (value < 0xffff) ? 1.35e6f / ((value) * 2) : 0;
194 WinRing0.ReleaseIsaBusMutex();