Added the ITE chip version to the report.
3 Version: MPL 1.1/GPL 2.0/LGPL 2.1
5 The contents of this file are subject to the Mozilla Public License Version
6 1.1 (the "License"); you may not use this file except in compliance with
7 the License. You may obtain a copy of the License at
9 http://www.mozilla.org/MPL/
11 Software distributed under the License is distributed on an "AS IS" basis,
12 WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
13 for the specific language governing rights and limitations under the License.
15 The Original Code is the Open Hardware Monitor code.
17 The Initial Developer of the Original Code is
18 Michael Möller <m.moeller@gmx.ch>.
19 Portions created by the Initial Developer are Copyright (C) 2009-2010
20 the Initial Developer. All Rights Reserved.
24 Alternatively, the contents of this file may be used under the terms of
25 either the GNU General Public License Version 2 or later (the "GPL"), or
26 the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
27 in which case the provisions of the GPL or the LGPL are applicable instead
28 of those above. If you wish to allow use of your version of this file only
29 under the terms of either the GPL or the LGPL, and not to allow others to
30 use your version of this file under the terms of the MPL, indicate your
31 decision by deleting the provisions above and replace them with the notice
32 and other provisions required by the GPL or the LGPL. If you do not delete
33 the provisions above, a recipient may use your version of this file under
34 the terms of any one of the MPL, the GPL or the LGPL.
39 using System.Collections.Generic;
41 using OpenHardwareMonitor.Utilities;
43 namespace OpenHardwareMonitor.Hardware.LPC {
44 public class F718XX : ISuperIO {
46 private ushort address;
49 private float?[] voltages;
50 private float?[] temperatures;
51 private float?[] fans;
54 private const byte ADDRESS_REGISTER_OFFSET = 0x05;
55 private const byte DATA_REGISTER_OFFSET = 0x06;
57 // Hardware Monitor Registers
58 private const byte VOLTAGE_BASE_REG = 0x20;
59 private const byte TEMPERATURE_CONFIG_REG = 0x69;
60 private const byte TEMPERATURE_BASE_REG = 0x70;
61 private byte[] FAN_TACHOMETER_REG = new byte[] { 0xA0, 0xB0, 0xC0, 0xD0 };
63 private byte ReadByte(byte register) {
64 WinRing0.WriteIoPortByte(
65 (ushort)(address + ADDRESS_REGISTER_OFFSET), register);
66 return WinRing0.ReadIoPortByte((ushort)(address + DATA_REGISTER_OFFSET));
69 public F718XX(Chip chip, ushort address) {
70 this.address = address;
73 voltages = new float?[chip == Chip.F71858 ? 3 : 9];
74 temperatures = new float?[3];
75 fans = new float?[chip == Chip.F71882 || chip == Chip.F71858? 4 : 3];
78 public Chip Chip { get { return chip; } }
79 public float?[] Voltages { get { return voltages; } }
80 public float?[] Temperatures { get { return temperatures; } }
81 public float?[] Fans { get { return fans; } }
83 public string GetReport() {
84 StringBuilder r = new StringBuilder();
86 r.AppendLine("LPC " + this.GetType().Name);
88 r.Append("Base Adress: 0x"); r.AppendLine(address.ToString("X4"));
90 r.AppendLine("Hardware Monitor Registers");
93 r.AppendLine(" 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F");
95 for (int i = 0; i <= 0xF; i++) {
96 r.Append(" "); r.Append((i << 4).ToString("X2")); r.Append(" ");
97 for (int j = 0; j <= 0xF; j++) {
99 r.Append(ReadByte((byte)((i << 4) | j)).ToString("X2"));
107 public void Update() {
109 for (int i = 0; i < voltages.Length; i++) {
110 int value = ReadByte((byte)(VOLTAGE_BASE_REG + i));
111 voltages[i] = 0.008f * value;
114 for (int i = 0; i < temperatures.Length; i++) {
117 int tableMode = 0x3 & ReadByte((byte)(TEMPERATURE_CONFIG_REG));
119 ReadByte((byte)(TEMPERATURE_BASE_REG + 2 * i));
121 ReadByte((byte)(TEMPERATURE_BASE_REG + 2 * i + 1));
122 if (high != 0xbb && high != 0xcc) {
125 case 0: bits = 0; break;
126 case 1: bits = 0; break;
127 case 2: bits = (high & 0x80) << 8; break;
128 case 3: bits = (low & 0x01) << 15; break;
131 bits |= (low & 0xe0) >> 1;
132 short value = (short)(bits & 0xfff0);
133 temperatures[i] = value / 128.0f;
135 temperatures[i] = null;
139 sbyte value = (sbyte)ReadByte((byte)(
140 TEMPERATURE_BASE_REG + 2 * (i + 1)));
141 if (value < sbyte.MaxValue && value > 0)
142 temperatures[i] = value;
144 temperatures[i] = null;
149 for (int i = 0; i < fans.Length; i++) {
150 int value = ReadByte(FAN_TACHOMETER_REG[i]) << 8;
151 value |= ReadByte((byte)(FAN_TACHOMETER_REG[i] + 1));
154 fans[i] = (value < 0x0fff) ? 1.5e6f / value : 0;