OpenHardwareMonitor-retired: Hardware/Mainboard/SuperIOHardware.cs@3b2bcba8c02d

     1 /*

     3   Version: MPL 1.1/GPL 2.0/LGPL 2.1

     5   The contents of this file are subject to the Mozilla Public License Version

     6   1.1 (the "License"); you may not use this file except in compliance with

     7   the License. You may obtain a copy of the License at

     9   http://www.mozilla.org/MPL/

    11   Software distributed under the License is distributed on an "AS IS" basis,

    12   WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License

    13   for the specific language governing rights and limitations under the License.

    15   The Original Code is the Open Hardware Monitor code.

    17   The Initial Developer of the Original Code is

    18   Michael Möller <m.moeller@gmx.ch>.

    19   Portions created by the Initial Developer are Copyright (C) 2009-2010

    20   the Initial Developer. All Rights Reserved.

    22   Contributor(s):

    24   Alternatively, the contents of this file may be used under the terms of

    25   either the GNU General Public License Version 2 or later (the "GPL"), or

    26   the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),

    27   in which case the provisions of the GPL or the LGPL are applicable instead

    28   of those above. If you wish to allow use of your version of this file only

    29   under the terms of either the GPL or the LGPL, and not to allow others to

    30   use your version of this file under the terms of the MPL, indicate your

    31   decision by deleting the provisions above and replace them with the notice

    32   and other provisions required by the GPL or the LGPL. If you do not delete

    33   the provisions above, a recipient may use your version of this file under

    34   the terms of any one of the MPL, the GPL or the LGPL.

    36 */

    38 using System;

    39 using System.Collections.Generic;

    40 using System.Globalization;

    41 using OpenHardwareMonitor.Hardware.LPC;

    43 namespace OpenHardwareMonitor.Hardware.Mainboard {

    44   internal class SuperIOHardware : Hardware {

    46     private ISuperIO superIO;

    47     private string name;

    49     private List<Sensor> voltages = new List<Sensor>();

    50     private List<Sensor> temperatures = new List<Sensor>();

    51     private List<Sensor> fans = new List<Sensor>();

    54     public SuperIOHardware(ISuperIO superIO, Manufacturer manufacturer,

    55       Model model, ISettings settings)

    56     {

    57       this.superIO = superIO;

    58       this.name = ChipName.GetName(superIO.Chip);

    60       List<Voltage> v = new List<Voltage>();

    61       List<Temperature> t = new List<Temperature>();

    62       List<Fan> f = new List<Fan>();

    64       switch (superIO.Chip) {

    65         case Chip.IT8712F:

    66         case Chip.IT8716F:

    67         case Chip.IT8718F:

    68         case Chip.IT8720F:

    69         case Chip.IT8726F:

    70           switch (manufacturer) {

    71             case Manufacturer.ASUS:

    72               switch (model) {

    73                 case Model.Crosshair_III_Formula: // IT8720F

    74                   v.Add(new Voltage("VBat", 8));

    75                   t.Add(new Temperature("CPU", 0));

    76                   for (int i = 0; i < superIO.Fans.Length; i++)

    77                     f.Add(new Fan("Fan #" + (i + 1), i));

    78                   break;

    79                 case Model.M2N_SLI_DELUXE:

    80                   v.Add(new Voltage("CPU VCore", 0));

    81                   v.Add(new Voltage("+3.3V", 1));

    82                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

    83                   v.Add(new Voltage("+12V", 4, 30, 10, 0));

    84                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0));

    85                   v.Add(new Voltage("VBat", 8));

    86                   t.Add(new Temperature("CPU", 0));

    87                   t.Add(new Temperature("Motherboard", 1));

    88                   f.Add(new Fan("CPU Fan", 0));

    89                   f.Add(new Fan("Chassis Fan #1", 1));

    90                   f.Add(new Fan("Power Fan", 2));

    91                   break;

    92                 case Model.M4A79XTD_EVO: // IT8720F

    93                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

    94                   v.Add(new Voltage("VBat", 8));

    95                   t.Add(new Temperature("CPU", 0));

    96                   t.Add(new Temperature("Motherboard", 1));

    97                   f.Add(new Fan("CPU Fan", 0));

    98                   f.Add(new Fan("Chassis Fan #1", 1));

    99                   f.Add(new Fan("Chassis Fan #2", 2));

   100                   break;

   101                 default:

   102                   v.Add(new Voltage("CPU VCore", 0));

   103                   v.Add(new Voltage("Voltage #2", 1, true));

   104                   v.Add(new Voltage("Voltage #3", 2, true));

   105                   v.Add(new Voltage("Voltage #4", 3, true));

   106                   v.Add(new Voltage("Voltage #5", 4, true));

   107                   v.Add(new Voltage("Voltage #6", 5, true));

   108                   v.Add(new Voltage("Voltage #7", 6, true));

   109                   v.Add(new Voltage("Voltage #8", 7, true));

   110                   v.Add(new Voltage("VBat", 8));

   111                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   112                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   113                   for (int i = 0; i < superIO.Fans.Length; i++)

   114                     f.Add(new Fan("Fan #" + (i + 1), i));

   115                   break;

   116               }

   117               break;

   118             case Manufacturer.DFI:

   119               switch (model) {

   120                 case Model.LP_BI_P45_T2RS_Elite: // IT8718F

   121                   v.Add(new Voltage("CPU VCore", 0));

   122                   v.Add(new Voltage("FSB VTT", 1));

   123                   v.Add(new Voltage("+3.3V", 2));

   124                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

   125                   v.Add(new Voltage("+12V", 4, 30, 10, 0));

   126                   v.Add(new Voltage("NB Core", 5));

   127                   v.Add(new Voltage("VDIMM", 6));

   128                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0));

   129                   v.Add(new Voltage("VBat", 8));

   130                   t.Add(new Temperature("CPU", 0));

   131                   t.Add(new Temperature("System", 1));

   132                   t.Add(new Temperature("Chipset", 2));

   133                   f.Add(new Fan("Fan #1", 0));

   134                   f.Add(new Fan("Fan #2", 1));

   135                   f.Add(new Fan("Fan #3", 2));

   136                   break;

   137                 case Model.LP_DK_P55_T3eH9: // IT8720F

   138                   v.Add(new Voltage("CPU VCore", 0));

   139                   v.Add(new Voltage("VTT", 1));

   140                   v.Add(new Voltage("+3.3V", 2));

   141                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

   142                   v.Add(new Voltage("+12V", 4, 30, 10, 0));

   143                   v.Add(new Voltage("CPU PLL", 5));

   144                   v.Add(new Voltage("DRAM", 6));

   145                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0));

   146                   v.Add(new Voltage("VBat", 8));

   147                   t.Add(new Temperature("Chipset", 0));

   148                   t.Add(new Temperature("CPU PWM", 1));

   149                   t.Add(new Temperature("CPU", 2));

   150                   f.Add(new Fan("Fan #1", 0));

   151                   f.Add(new Fan("Fan #2", 1));

   152                   f.Add(new Fan("Fan #3", 2));

   153                   break;

   154                 default:

   155                   v.Add(new Voltage("CPU VCore", 0));

   156                   v.Add(new Voltage("VTT", 1, true));

   157                   v.Add(new Voltage("+3.3V", 2, true));

   158                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));

   159                   v.Add(new Voltage("+12V", 4, 30, 10, 0, true));

   160                   v.Add(new Voltage("Voltage #6", 5, true));

   161                   v.Add(new Voltage("DRAM", 6, true));

   162                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));

   163                   v.Add(new Voltage("VBat", 8));

   164                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   165                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   166                   for (int i = 0; i < superIO.Fans.Length; i++)

   167                     f.Add(new Fan("Fan #" + (i + 1), i));

   168                   break;

   169               }

   170               break;

   172             case Manufacturer.Gigabyte:

   173               switch (model) {

   174                 case Model._965P_S3: // IT8718F

   175                   v.Add(new Voltage("CPU VCore", 0));

   176                   v.Add(new Voltage("DRAM", 1));

   177                   v.Add(new Voltage("+3.3V", 2));

   178                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

   179                   v.Add(new Voltage("+12V", 7, 27, 9.1f, 0));

   180                   v.Add(new Voltage("VBat", 8));

   181                   t.Add(new Temperature("System", 0));

   182                   t.Add(new Temperature("CPU", 1));

   183                   f.Add(new Fan("CPU Fan", 0));

   184                   f.Add(new Fan("System Fan", 1));

   185                   break;

   186                 case Model.EP45_DS3R: // IT8718F

   187                 case Model.EP45_UD3R:

   188                 case Model.X38_DS5:

   189                   v.Add(new Voltage("CPU VCore", 0));

   190                   v.Add(new Voltage("DRAM", 1));

   191                   v.Add(new Voltage("+3.3V", 2));

   192                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

   193                   v.Add(new Voltage("+12V", 7, 27, 9.1f, 0));

   194                   v.Add(new Voltage("VBat", 8));

   195                   t.Add(new Temperature("System", 0));

   196                   t.Add(new Temperature("CPU", 1));

   197                   f.Add(new Fan("CPU Fan", 0));

   198                   f.Add(new Fan("System Fan #2", 1));

   199                   f.Add(new Fan("Power Fan", 2));

   200                   f.Add(new Fan("System Fan #1", 3));

   201                   break;

   202                 case Model.EX58_EXTREME: // IT8720F

   203                   v.Add(new Voltage("CPU VCore", 0));

   204                   v.Add(new Voltage("DRAM", 1));

   205                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

   206                   v.Add(new Voltage("VBat", 8));

   207                   t.Add(new Temperature("System", 0));

   208                   t.Add(new Temperature("CPU", 1));

   209                   t.Add(new Temperature("Northbridge", 2));

   210                   f.Add(new Fan("CPU Fan", 0));

   211                   f.Add(new Fan("System Fan #2", 1));

   212                   f.Add(new Fan("Power Fan", 2));

   213                   f.Add(new Fan("System Fan #1", 3));

   214                   break;

   215                 case Model.P35_DS3: // IT8718F

   216                 case Model.P35_DS3L: // IT8718F

   217                   v.Add(new Voltage("CPU VCore", 0));

   218                   v.Add(new Voltage("DRAM", 1));

   219                   v.Add(new Voltage("+3.3V", 2));

   220                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

   221                   v.Add(new Voltage("+12V", 7, 27, 9.1f, 0));

   222                   v.Add(new Voltage("VBat", 8));

   223                   t.Add(new Temperature("System", 0));

   224                   t.Add(new Temperature("CPU", 1));

   225                   f.Add(new Fan("CPU Fan", 0));

   226                   f.Add(new Fan("System Fan #1", 1));

   227                   f.Add(new Fan("System Fan #2", 2));

   228                   f.Add(new Fan("Power Fan", 3));

   229                   break;

   230                 case Model.P55_UD4: // IT8720F

   231                 case Model.P55M_UD4: // IT8720F

   232                   v.Add(new Voltage("CPU VCore", 0));

   233                   v.Add(new Voltage("DRAM", 1));

   234                   v.Add(new Voltage("+3.3V", 2));

   235                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

   236                   v.Add(new Voltage("+12V", 5, 27, 9.1f, 0));

   237                   v.Add(new Voltage("VBat", 8));

   238                   t.Add(new Temperature("System", 0));

   239                   t.Add(new Temperature("CPU", 2));

   240                   f.Add(new Fan("CPU Fan", 0));

   241                   f.Add(new Fan("System Fan #2", 1));

   242                   f.Add(new Fan("Power Fan", 2));

   243                   f.Add(new Fan("System Fan #1", 3));

   244                   break;

   245                 case Model.GA_MA770T_UD3: // IT8720F

   246                   v.Add(new Voltage("CPU VCore", 0));

   247                   v.Add(new Voltage("DRAM", 1));

   248                   v.Add(new Voltage("+3.3V", 2));

   249                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

   250                   v.Add(new Voltage("+12V", 4, 27, 9.1f, 0));

   251                   v.Add(new Voltage("VBat", 8));

   252                   t.Add(new Temperature("System", 0));

   253                   t.Add(new Temperature("CPU", 1));

   254                   f.Add(new Fan("CPU Fan", 0));

   255                   f.Add(new Fan("System Fan #1", 1));

   256                   f.Add(new Fan("System Fan #2", 2));

   257                   f.Add(new Fan("Power Fan", 3));

   258                   break;

   259                 case Model.GA_MA785GMT_UD2H: // IT8718F

   260                   v.Add(new Voltage("CPU VCore", 0));

   261                   v.Add(new Voltage("DRAM", 1));

   262                   v.Add(new Voltage("+3.3V", 2));

   263                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

   264                   v.Add(new Voltage("+12V", 4, 27, 9.1f, 0));

   265                   v.Add(new Voltage("VBat", 8));

   266                   t.Add(new Temperature("System", 0));

   267                   t.Add(new Temperature("CPU", 1));

   268                   f.Add(new Fan("CPU Fan", 0));

   269                   f.Add(new Fan("System Fan", 1));

   270                   f.Add(new Fan("NB Fan", 2));

   271                   break;

   272                 case Model.X58A_UD3R: // IT8720F

   273                   v.Add(new Voltage("CPU VCore", 0));

   274                   v.Add(new Voltage("DRAM", 1));

   275                   v.Add(new Voltage("+3.3V", 2));

   276                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));

   277                   v.Add(new Voltage("+12V", 5, 27, 9.1f, 0));

   278                   v.Add(new Voltage("VBat", 8));

   279                   t.Add(new Temperature("System", 0));

   280                   t.Add(new Temperature("CPU", 1));

   281                   t.Add(new Temperature("Northbridge", 2));

   282                   f.Add(new Fan("CPU Fan", 0));

   283                   f.Add(new Fan("System Fan #2", 1));

   284                   f.Add(new Fan("Power Fan", 2));

   285                   f.Add(new Fan("System Fan #1", 3));

   286                   break;

   287                 default:

   288                   v.Add(new Voltage("CPU VCore", 0));

   289                   v.Add(new Voltage("DRAM", 1, true));

   290                   v.Add(new Voltage("+3.3V", 2, true));

   291                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));

   292                   v.Add(new Voltage("Voltage #5", 4, true));

   293                   v.Add(new Voltage("Voltage #6", 5, true));

   294                   v.Add(new Voltage("Voltage #7", 6, true));

   295                   v.Add(new Voltage("+12V", 7, 27, 9.1f, 0, true));

   296                   v.Add(new Voltage("VBat", 8));

   297                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   298                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   299                   for (int i = 0; i < superIO.Fans.Length; i++)

   300                     f.Add(new Fan("Fan #" + (i + 1), i));

   301                   break;

   302               }

   303               break;

   305             default:

   306               v.Add(new Voltage("CPU VCore", 0));

   307               v.Add(new Voltage("Voltage #2", 1, true));

   308               v.Add(new Voltage("Voltage #3", 2, true));

   309               v.Add(new Voltage("Voltage #4", 3, true));

   310               v.Add(new Voltage("Voltage #5", 4, true));

   311               v.Add(new Voltage("Voltage #6", 5, true));

   312               v.Add(new Voltage("Voltage #7", 6, true));

   313               v.Add(new Voltage("Voltage #8", 7, true));

   314               v.Add(new Voltage("VBat", 8));

   315               for (int i = 0; i < superIO.Temperatures.Length; i++)

   316                 t.Add(new Temperature("Temperature #" + (i + 1), i));

   317               for (int i = 0; i < superIO.Fans.Length; i++)

   318                 f.Add(new Fan("Fan #" + (i + 1), i));

   319               break;

   320           }

   321           break;

   323         case Chip.F71858:

   324           v.Add(new Voltage("VCC3V", 0, 150, 150, 0));

   325           v.Add(new Voltage("VSB3V", 1, 150, 150, 0));

   326           v.Add(new Voltage("Battery", 2, 150, 150, 0));

   327           for (int i = 0; i < superIO.Temperatures.Length; i++)

   328             t.Add(new Temperature("Temperature #" + (i + 1), i));

   329           for (int i = 0; i < superIO.Fans.Length; i++)

   330             f.Add(new Fan("Fan #" + (i + 1), i));

   331           break;

   332         case Chip.F71862:

   333         case Chip.F71869:

   334         case Chip.F71882:

   335         case Chip.F71889ED:

   336         case Chip.F71889F:

   337           switch (manufacturer) {

   338             case Manufacturer.EVGA:

   339               switch (model) {

   340                 case Model.X58_SLI_Classified: // F71882

   341                   v.Add(new Voltage("VCC3V", 0, 150, 150, 0));

   342                   v.Add(new Voltage("CPU VCore", 1, 47, 100, 0));

   343                   v.Add(new Voltage("DIMM", 2, 47, 100, 0));

   344                   v.Add(new Voltage("CPU VTT", 3, 24, 100, 0));

   345                   v.Add(new Voltage("IOH Vcore", 4, 24, 100, 0));

   346                   v.Add(new Voltage("+5V", 5, 51, 12, 0));

   347                   v.Add(new Voltage("+12V", 6, 56, 6.8f, 0));

   348                   v.Add(new Voltage("3VSB", 7, 150, 150, 0));

   349                   v.Add(new Voltage("VBat", 8, 150, 150, 0));

   350                   t.Add(new Temperature("CPU", 0));

   351                   t.Add(new Temperature("VREG", 1));

   352                   t.Add(new Temperature("System", 2));

   353                   f.Add(new Fan("CPU Fan", 0));

   354                   f.Add(new Fan("Power Fan", 1));

   355                   f.Add(new Fan("Chassis Fan", 2));

   356                   break;

   357                 default:

   358                   v.Add(new Voltage("VCC3V", 0, 150, 150, 0));

   359                   v.Add(new Voltage("CPU VCore", 1));

   360                   v.Add(new Voltage("Voltage #3", 2, true));

   361                   v.Add(new Voltage("Voltage #4", 3, true));

   362                   v.Add(new Voltage("Voltage #5", 4, true));

   363                   v.Add(new Voltage("Voltage #6", 5, true));

   364                   v.Add(new Voltage("Voltage #7", 6, true));

   365                   v.Add(new Voltage("VSB3V", 7, 150, 150, 0));

   366                   v.Add(new Voltage("VBat", 8, 150, 150, 0));

   367                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   368                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   369                   for (int i = 0; i < superIO.Fans.Length; i++)

   370                     f.Add(new Fan("Fan #" + (i + 1), i));

   371                   break;

   372               }

   373               break;

   374             default:

   375               v.Add(new Voltage("VCC3V", 0, 150, 150, 0));

   376               v.Add(new Voltage("CPU VCore", 1));

   377               v.Add(new Voltage("Voltage #3", 2, true));

   378               v.Add(new Voltage("Voltage #4", 3, true));

   379               v.Add(new Voltage("Voltage #5", 4, true));

   380               v.Add(new Voltage("Voltage #6", 5, true));

   381               v.Add(new Voltage("Voltage #7", 6, true));

   382               v.Add(new Voltage("VSB3V", 7, 150, 150, 0));

   383               v.Add(new Voltage("VBat", 8, 150, 150, 0));

   384               for (int i = 0; i < superIO.Temperatures.Length; i++)

   385                 t.Add(new Temperature("Temperature #" + (i + 1), i));

   386               for (int i = 0; i < superIO.Fans.Length; i++)

   387                 f.Add(new Fan("Fan #" + (i + 1), i));

   388               break;

   389           }

   390           break;

   392         case Chip.W83627EHF:

   393           v.Add(new Voltage("CPU VCore", 0));

   394           v.Add(new Voltage("Voltage #2", 1, true));

   395           v.Add(new Voltage("AVCC", 2, 34, 34, 0));

   396           v.Add(new Voltage("3VCC", 3, 34, 34, 0));

   397           v.Add(new Voltage("Voltage #5", 4, true));

   398           v.Add(new Voltage("Voltage #6", 5, true));

   399           v.Add(new Voltage("Voltage #7", 6, true));

   400           v.Add(new Voltage("3VSB", 7, 34, 34, 0));

   401           v.Add(new Voltage("VBAT", 8, 34, 34, 0));

   402           v.Add(new Voltage("Voltage #10", 9, true));

   403           t.Add(new Temperature("CPU", 0));

   404           t.Add(new Temperature("Auxiliary", 1));

   405           t.Add(new Temperature("System", 2));

   406           f.Add(new Fan("System Fan", 0));

   407           f.Add(new Fan("CPU Fan", 1));

   408           f.Add(new Fan("Auxiliary Fan", 2));

   409           f.Add(new Fan("CPU Fan #2", 3));

   410           f.Add(new Fan("Auxiliary Fan #2", 4));

   411           break;

   412         case Chip.W83627DHG:

   413         case Chip.W83627DHGP:

   414         case Chip.W83667HG:

   415         case Chip.W83667HGB:

   416           switch (manufacturer) {

   417             case Manufacturer.ASRock:

   418               switch (model) {

   419                 case Model._880GMH_USB3: // W83627DHG-P

   420                   v.Add(new Voltage("CPU VCore", 0));

   421                   v.Add(new Voltage("+3.3V", 3, 34, 34, 0));

   422                   v.Add(new Voltage("+5V", 5, 15, 7.5f, 0));

   423                   v.Add(new Voltage("+12V", 6, 56, 10, 0));

   424                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34, 0));

   425                   v.Add(new Voltage("VBAT", 8, 34, 34, 0));

   426                   t.Add(new Temperature("CPU", 0));

   427                   t.Add(new Temperature("Motherboard", 2));

   428                   f.Add(new Fan("Chassis Fan", 0));

   429                   f.Add(new Fan("CPU Fan", 1));

   430                   f.Add(new Fan("Power Fan", 2));

   431                   break;

   432                 default:

   433                   v.Add(new Voltage("CPU VCore", 0));

   434                   v.Add(new Voltage("Voltage #2", 1, true));

   435                   v.Add(new Voltage("AVCC", 2, 34, 34, 0));

   436                   v.Add(new Voltage("3VCC", 3, 34, 34, 0));

   437                   v.Add(new Voltage("Voltage #5", 4, true));

   438                   v.Add(new Voltage("Voltage #6", 5, true));

   439                   v.Add(new Voltage("Voltage #7", 6, true));

   440                   v.Add(new Voltage("3VSB", 7, 34, 34, 0));

   441                   v.Add(new Voltage("VBAT", 8, 34, 34, 0));

   442                   t.Add(new Temperature("CPU", 0));

   443                   t.Add(new Temperature("Auxiliary", 1));

   444                   t.Add(new Temperature("System", 2));

   445                   f.Add(new Fan("System Fan", 0));

   446                   f.Add(new Fan("CPU Fan", 1));

   447                   f.Add(new Fan("Auxiliary Fan", 2));

   448                   f.Add(new Fan("CPU Fan #2", 3));

   449                   f.Add(new Fan("Auxiliary Fan #2", 4));

   450                   break;

   451               }

   452               break;

   453             case Manufacturer.ASUS:

   454               switch (model) {

   455                 case Model.P6X58D_E: // W83667HG

   456                   v.Add(new Voltage("CPU VCore", 0));

   457                   v.Add(new Voltage("+12V", 1, 11.5f, 1.91f, 0));

   458                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34, 0));

   459                   v.Add(new Voltage("+3.3V", 3, 34, 34, 0));

   460                   v.Add(new Voltage("+5V", 4, 15, 7.5f, 0));

   461                   v.Add(new Voltage("Voltage #6", 5, true));

   462                   v.Add(new Voltage("Voltage #7", 6, true));

   463                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34, 0));

   464                   v.Add(new Voltage("VBAT", 8, 34, 34, 0));

   465                   t.Add(new Temperature("CPU", 0));

   466                   t.Add(new Temperature("Motherboard", 2));

   467                   f.Add(new Fan("Chassis Fan #1", 0));

   468                   f.Add(new Fan("CPU Fan", 1));

   469                   f.Add(new Fan("Power Fan", 2));

   470                   f.Add(new Fan("Chassis Fan #2", 3));

   471                   f.Add(new Fan("Chassis Fan #3", 4));

   472                   break;

   473                 default:

   474                   v.Add(new Voltage("CPU VCore", 0));

   475                   v.Add(new Voltage("Voltage #2", 1, true));

   476                   v.Add(new Voltage("AVCC", 2, 34, 34, 0));

   477                   v.Add(new Voltage("3VCC", 3, 34, 34, 0));

   478                   v.Add(new Voltage("Voltage #5", 4, true));

   479                   v.Add(new Voltage("Voltage #6", 5, true));

   480                   v.Add(new Voltage("Voltage #7", 6, true));

   481                   v.Add(new Voltage("3VSB", 7, 34, 34, 0));

   482                   v.Add(new Voltage("VBAT", 8, 34, 34, 0));

   483                   t.Add(new Temperature("CPU", 0));

   484                   t.Add(new Temperature("Auxiliary", 1));

   485                   t.Add(new Temperature("System", 2));

   486                   f.Add(new Fan("System Fan", 0));

   487                   f.Add(new Fan("CPU Fan", 1));

   488                   f.Add(new Fan("Auxiliary Fan", 2));

   489                   f.Add(new Fan("CPU Fan #2", 3));

   490                   f.Add(new Fan("Auxiliary Fan #2", 4));

   491                   break;

   492               }

   493               break;

   494             default:

   495               v.Add(new Voltage("CPU VCore", 0));

   496               v.Add(new Voltage("Voltage #2", 1, true));

   497               v.Add(new Voltage("AVCC", 2, 34, 34, 0));

   498               v.Add(new Voltage("3VCC", 3, 34, 34, 0));

   499               v.Add(new Voltage("Voltage #5", 4, true));

   500               v.Add(new Voltage("Voltage #6", 5, true));

   501               v.Add(new Voltage("Voltage #7", 6, true));

   502               v.Add(new Voltage("3VSB", 7, 34, 34, 0));

   503               v.Add(new Voltage("VBAT", 8, 34, 34, 0));

   504               t.Add(new Temperature("CPU", 0));

   505               t.Add(new Temperature("Auxiliary", 1));

   506               t.Add(new Temperature("System", 2));

   507               f.Add(new Fan("System Fan", 0));

   508               f.Add(new Fan("CPU Fan", 1));

   509               f.Add(new Fan("Auxiliary Fan", 2));

   510               f.Add(new Fan("CPU Fan #2", 3));

   511               f.Add(new Fan("Auxiliary Fan #2", 4));

   512               break;

   513           }

   514           break;

   515         case Chip.W83627HF:

   516         case Chip.W83627THF:

   517         case Chip.W83687THF:

   518           v.Add(new Voltage("CPU VCore", 0));

   519           v.Add(new Voltage("Voltage #2", 1, true));

   520           v.Add(new Voltage("Voltage #3", 2, true));

   521           v.Add(new Voltage("AVCC", 3, 34, 51, 0));

   522           v.Add(new Voltage("Voltage #5", 4, true));

   523           v.Add(new Voltage("5VSB", 5, 34, 51, 0));

   524           v.Add(new Voltage("VBAT", 6));

   525           t.Add(new Temperature("CPU", 0));

   526           t.Add(new Temperature("Auxiliary", 1));

   527           t.Add(new Temperature("System", 2));

   528           f.Add(new Fan("System Fan", 0));

   529           f.Add(new Fan("CPU Fan", 1));

   530           f.Add(new Fan("Auxiliary Fan", 2));

   531           break;

   532         default:

   533           for (int i = 0; i < superIO.Voltages.Length; i++)

   534             v.Add(new Voltage("Voltage #" + (i + 1), i, true));

   535           for (int i = 0; i < superIO.Temperatures.Length; i++)

   536             t.Add(new Temperature("Temperature #" + (i + 1), i));

   537           for (int i = 0; i < superIO.Fans.Length; i++)

   538             f.Add(new Fan("Fan #" + (i + 1), i));

   539           break;

   540       }

   542       string formula = "Voltage = value + (value - Vf) * Ri / Rf.";

   543       foreach (Voltage voltage in v)

   544         if (voltage.Index < superIO.Voltages.Length) {

   545           Sensor sensor = new Sensor(voltage.Name, voltage.Index,

   546             voltage.Hidden, SensorType.Voltage, this,

   547             new ParameterDescription[] {

   548             new ParameterDescription("Ri [kΩ]", "Input resistance.\n" +

   549               formula, voltage.Ri),

   550             new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" +

   551               formula, voltage.Rf),

   552             new ParameterDescription("Vf [V]", "Reference voltage.\n" +

   553               formula, voltage.Vf)

   554             }, settings);

   555           voltages.Add(sensor);

   556       }

   558       foreach (Temperature temperature in t)

   559         if (temperature.Index < superIO.Temperatures.Length) {

   560         Sensor sensor = new Sensor(temperature.Name, temperature.Index,

   561           SensorType.Temperature, this, new ParameterDescription[] {

   562           new ParameterDescription("Offset [°C]", "Temperature offset.", 0)

   563         }, settings);

   564         temperatures.Add(sensor);

   565       }

   567       foreach (Fan fan in f)

   568         if (fan.Index < superIO.Fans.Length) {

   569           Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,

   570             this, settings);

   571           fans.Add(sensor);

   572         }

   573     }

   575     public override Identifier Identifier {

   576       get {

   577         return new Identifier("lpc",

   578           superIO.Chip.ToString().ToLower(CultureInfo.InvariantCulture));

   579       }

   580     }

   582     public override HardwareType HardwareType {

   583       get { return HardwareType.SuperIO; }

   584     }

   586     public override string Name {

   587       get { return name; }

   588     }

   590     public override string GetReport() {

   591       return superIO.GetReport();

   592     }

   594     public override void Update() {

   595       superIO.Update();

   597       foreach (Sensor sensor in voltages) {

   598         float? value = superIO.Voltages[sensor.Index];

   599         if (value.HasValue) {

   600           sensor.Value = value + (value - sensor.Parameters[2].Value) *

   601             sensor.Parameters[0].Value / sensor.Parameters[1].Value;

   602           ActivateSensor(sensor);

   603         }

   604       }

   606       foreach (Sensor sensor in temperatures) {

   607         float? value = superIO.Temperatures[sensor.Index];

   608         if (value.HasValue) {

   609           sensor.Value = value + sensor.Parameters[0].Value;

   610           ActivateSensor(sensor);

   611         }

   612       }

   614       foreach (Sensor sensor in fans) {

   615         float? value = superIO.Fans[sensor.Index];

   616         if (value.HasValue) {

   617           sensor.Value = value;

   618           if (value.Value > 0)

   619             ActivateSensor(sensor);

   620         }

   621       }

   622     }

   624     private class Voltage {

   625       public readonly string Name;

   626       public readonly int Index;

   627       public readonly float Ri;

   628       public readonly float Rf;

   629       public readonly float Vf;

   630       public readonly bool Hidden;

   632       public Voltage(string name, int index) :

   633         this(name, index, 0, 1, 0, false) { }

   635       public Voltage(string name, int index, bool hidden) :

   636         this(name, index, 0, 1, 0, hidden) { }

   638       public Voltage(string name, int index, float ri, float rf, float vf) :

   639         this(name, index, ri, rf, vf, false) { }

   641       public Voltage(string name, int index, float ri, float rf, float vf,

   642         bool hidden) {

   643         this.Name = name;

   644         this.Index = index;

   645         this.Ri = ri;

   646         this.Rf = rf;

   647         this.Vf = vf;

   648         this.Hidden = hidden;

   649       }

   650     }

   652     private class Temperature {

   653       public readonly string Name;

   654       public readonly int Index;

   656       public Temperature(string name, int index) {

   657         this.Name = name;

   658         this.Index = index;

   659       }

   660     }

   662     private class Fan {

   663       public readonly string Name;

   664       public readonly int Index;

   666       public Fan(string name, int index) {

   667         this.Name = name;

   668         this.Index = index;

   669       }

   670     }

   671   }

   672 }

author	moel.mich
	Tue, 17 Aug 2010 20:25:27 +0000
changeset 169	3b2bcba8c02d
parent 167	b7cc9d09aefe
child 170	31858ba46e9c
permissions	-rw-r--r--