OpenHardwareMonitor-retired: Hardware/Mainboard/SuperIOHardware.cs@1036b453f1f6

     1 /*

     3   This Source Code Form is subject to the terms of the Mozilla Public

     4   License, v. 2.0. If a copy of the MPL was not distributed with this

     5   file, You can obtain one at http://mozilla.org/MPL/2.0/.

     7   Copyright (C) 2009-2012 Michael Möller <mmoeller@openhardwaremonitor.org>

     9 */

    11 using System;

    12 using System.Collections.Generic;

    13 using System.Globalization;

    14 using System.Threading;

    15 using OpenHardwareMonitor.Hardware.LPC;

    17 namespace OpenHardwareMonitor.Hardware.Mainboard {

    18   internal class SuperIOHardware : Hardware {

    20     private readonly Mainboard mainboard;

    21     private readonly ISuperIO superIO;

    23     private readonly List<Sensor> voltages = new List<Sensor>();

    24     private readonly List<Sensor> temperatures = new List<Sensor>();

    25     private readonly List<Sensor> fans = new List<Sensor>();

    26     private readonly List<Sensor> controls = new List<Sensor>();

    28     private delegate float? ReadValueDelegate(int index);

    29     private delegate void UpdateDelegate();

    31     // delegates for mainboard specific sensor reading code

    32     private readonly ReadValueDelegate readVoltage;

    33     private readonly ReadValueDelegate readTemperature;

    34     private readonly ReadValueDelegate readFan;

    35     private readonly ReadValueDelegate readControl;

    37     // delegate for post update mainboard specific code

    38     private readonly UpdateDelegate postUpdate;

    40     // mainboard specific mutex

    41     private readonly Mutex mutex;

    43     public SuperIOHardware(Mainboard mainboard, ISuperIO superIO,

    44       Manufacturer manufacturer, Model model, ISettings settings)

    45       : base(ChipName.GetName(superIO.Chip), new Identifier("lpc",

    46         superIO.Chip.ToString().ToLower(CultureInfo.InvariantCulture)),

    47         settings)

    48     {

    49       this.mainboard = mainboard;

    50       this.superIO = superIO;

    52       this.readVoltage = (index) => superIO.Voltages[index];

    53       this.readTemperature = (index) => superIO.Temperatures[index];

    54       this.readFan = (index) => superIO.Fans[index];

    55       this.readControl = (index) => superIO.Controls[index];

    57       this.postUpdate = () => { };

    59       List<Voltage> v = new List<Voltage>();

    60       List<Temperature> t = new List<Temperature>();

    61       List<Fan> f = new List<Fan>();

    62       List<Ctrl> c = new List<Ctrl>();

    64       switch (superIO.Chip) {

    65         case Chip.IT8705F:

    66         case Chip.IT8712F:

    67         case Chip.IT8716F:

    68         case Chip.IT8718F:

    69         case Chip.IT8720F:

    70         case Chip.IT8726F:

    71           switch (manufacturer) {

    72             case Manufacturer.ASUS:

    73               switch (model) {

    74                 case Model.Crosshair_III_Formula: // IT8720F

    75                   v.Add(new Voltage("VBat", 8));

    76                   t.Add(new Temperature("CPU", 0));

    77                   for (int i = 0; i < superIO.Fans.Length; i++)

    78                     f.Add(new Fan("Fan #" + (i + 1), i));

    79                   break;

    80                 case Model.M2N_SLI_DELUXE:

    81                   v.Add(new Voltage("CPU VCore", 0));

    82                   v.Add(new Voltage("+3.3V", 1));

    83                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

    84                   v.Add(new Voltage("+12V", 4, 30, 10));

    85                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10));

    86                   v.Add(new Voltage("VBat", 8));

    87                   t.Add(new Temperature("CPU", 0));

    88                   t.Add(new Temperature("Motherboard", 1));

    89                   f.Add(new Fan("CPU Fan", 0));

    90                   f.Add(new Fan("Chassis Fan #1", 1));

    91                   f.Add(new Fan("Power Fan", 2));

    92                   break;

    93                 case Model.M4A79XTD_EVO: // IT8720F

    94                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

    95                   v.Add(new Voltage("VBat", 8));

    96                   t.Add(new Temperature("CPU", 0));

    97                   t.Add(new Temperature("Motherboard", 1));

    98                   f.Add(new Fan("CPU Fan", 0));

    99                   f.Add(new Fan("Chassis Fan #1", 1));

   100                   f.Add(new Fan("Chassis Fan #2", 2));

   101                   break;

   102                 default:

   103                   v.Add(new Voltage("CPU VCore", 0));

   104                   v.Add(new Voltage("Voltage #2", 1, true));

   105                   v.Add(new Voltage("Voltage #3", 2, true));

   106                   v.Add(new Voltage("Voltage #4", 3, true));

   107                   v.Add(new Voltage("Voltage #5", 4, true));

   108                   v.Add(new Voltage("Voltage #6", 5, true));

   109                   v.Add(new Voltage("Voltage #7", 6, true));

   110                   v.Add(new Voltage("Voltage #8", 7, true));

   111                   v.Add(new Voltage("VBat", 8));

   112                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   113                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   114                   for (int i = 0; i < superIO.Fans.Length; i++)

   115                     f.Add(new Fan("Fan #" + (i + 1), i));

   116                   break;

   117               }

   118               break;

   120             case Manufacturer.ASRock:

   121               switch (model) {

   122                 case Model.P55_Deluxe: // IT8720F

   124                   v.Add(new Voltage("CPU VCore", 0));

   125                   v.Add(new Voltage("+3.3V", 2));

   126                   v.Add(new Voltage("+12V", 4, 30, 10));

   127                   v.Add(new Voltage("+5V", 5, 6.8f, 10));

   128                   v.Add(new Voltage("VBat", 8));

   129                   t.Add(new Temperature("CPU", 0));

   130                   t.Add(new Temperature("Motherboard", 1));

   131                   f.Add(new Fan("CPU Fan", 0));

   132                   f.Add(new Fan("Chassis Fan #1", 1));

   134                   // this mutex is also used by the official ASRock tool

   135                   mutex = new Mutex(false, "ASRockOCMark");

   137                   bool exclusiveAccess = false;

   138                   try {

   139                     exclusiveAccess = mutex.WaitOne(10, false);

   140                   } catch (AbandonedMutexException) { }

   141                     catch (InvalidOperationException) { }

   143                   // only read additional fans if we get exclusive access

   144                   if (exclusiveAccess) {

   146                     f.Add(new Fan("Chassis Fan #2", 2));

   147                     f.Add(new Fan("Chassis Fan #3", 3));

   148                     f.Add(new Fan("Power Fan", 4));

   150                     readFan = (index) => {

   151                       if (index < 2) {

   152                         return superIO.Fans[index];

   153                       } else {

   154                         // get GPIO 80-87

   155                         byte? gpio = superIO.ReadGPIO(7);

   156                         if (!gpio.HasValue)

   157                           return null;

   159                         // read the last 3 fans based on GPIO 83-85

   160                         int[] masks = { 0x05, 0x03, 0x06 };

   161                         return (((gpio.Value >> 3) & 0x07) ==

   162                           masks[index - 2]) ? superIO.Fans[2] : null;

   163                       }

   164                     };

   166                     int fanIndex = 0;

   167                     postUpdate = () => {

   168                       // get GPIO 80-87

   169                       byte? gpio = superIO.ReadGPIO(7);

   170                       if (!gpio.HasValue)

   171                         return;

   173                       // prepare the GPIO 83-85 for the next update

   174                       int[] masks = { 0x05, 0x03, 0x06 };

   175                       superIO.WriteGPIO(7,

   176                         (byte)((gpio.Value & 0xC7) | (masks[fanIndex] << 3)));

   177                       fanIndex = (fanIndex + 1) % 3;

   178                     };

   179                   }

   181                   break;

   182                 default:

   183                   v.Add(new Voltage("CPU VCore", 0));

   184                   v.Add(new Voltage("Voltage #2", 1, true));

   185                   v.Add(new Voltage("Voltage #3", 2, true));

   186                   v.Add(new Voltage("Voltage #4", 3, true));

   187                   v.Add(new Voltage("Voltage #5", 4, true));

   188                   v.Add(new Voltage("Voltage #6", 5, true));

   189                   v.Add(new Voltage("Voltage #7", 6, true));

   190                   v.Add(new Voltage("Voltage #8", 7, true));

   191                   v.Add(new Voltage("VBat", 8));

   192                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   193                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   194                   for (int i = 0; i < superIO.Fans.Length; i++)

   195                     f.Add(new Fan("Fan #" + (i + 1), i));

   196                   break;

   197               };

   198               break;

   200             case Manufacturer.DFI:

   201               switch (model) {

   202                 case Model.LP_BI_P45_T2RS_Elite: // IT8718F

   203                   v.Add(new Voltage("CPU VCore", 0));

   204                   v.Add(new Voltage("FSB VTT", 1));

   205                   v.Add(new Voltage("+3.3V", 2));

   206                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   207                   v.Add(new Voltage("+12V", 4, 30, 10));

   208                   v.Add(new Voltage("NB Core", 5));

   209                   v.Add(new Voltage("VDIMM", 6));

   210                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10));

   211                   v.Add(new Voltage("VBat", 8));

   212                   t.Add(new Temperature("CPU", 0));

   213                   t.Add(new Temperature("System", 1));

   214                   t.Add(new Temperature("Chipset", 2));

   215                   f.Add(new Fan("Fan #1", 0));

   216                   f.Add(new Fan("Fan #2", 1));

   217                   f.Add(new Fan("Fan #3", 2));

   218                   break;

   219                 case Model.LP_DK_P55_T3eH9: // IT8720F

   220                   v.Add(new Voltage("CPU VCore", 0));

   221                   v.Add(new Voltage("VTT", 1));

   222                   v.Add(new Voltage("+3.3V", 2));

   223                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   224                   v.Add(new Voltage("+12V", 4, 30, 10));

   225                   v.Add(new Voltage("CPU PLL", 5));

   226                   v.Add(new Voltage("DRAM", 6));

   227                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10));

   228                   v.Add(new Voltage("VBat", 8));

   229                   t.Add(new Temperature("Chipset", 0));

   230                   t.Add(new Temperature("CPU PWM", 1));

   231                   t.Add(new Temperature("CPU", 2));

   232                   f.Add(new Fan("Fan #1", 0));

   233                   f.Add(new Fan("Fan #2", 1));

   234                   f.Add(new Fan("Fan #3", 2));

   235                   break;

   236                 default:

   237                   v.Add(new Voltage("CPU VCore", 0));

   238                   v.Add(new Voltage("VTT", 1, true));

   239                   v.Add(new Voltage("+3.3V", 2, true));

   240                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));

   241                   v.Add(new Voltage("+12V", 4, 30, 10, 0, true));

   242                   v.Add(new Voltage("Voltage #6", 5, true));

   243                   v.Add(new Voltage("DRAM", 6, true));

   244                   v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));

   245                   v.Add(new Voltage("VBat", 8));

   246                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   247                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   248                   for (int i = 0; i < superIO.Fans.Length; i++)

   249                     f.Add(new Fan("Fan #" + (i + 1), i));

   250                   break;

   251               }

   252               break;

   254             case Manufacturer.Gigabyte:

   255               switch (model) {

   256                 case Model._965P_S3: // IT8718F

   257                   v.Add(new Voltage("CPU VCore", 0));

   258                   v.Add(new Voltage("DRAM", 1));

   259                   v.Add(new Voltage("+3.3V", 2));

   260                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   261                   v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));

   262                   v.Add(new Voltage("VBat", 8));

   263                   t.Add(new Temperature("System", 0));

   264                   t.Add(new Temperature("CPU", 1));

   265                   f.Add(new Fan("CPU Fan", 0));

   266                   f.Add(new Fan("System Fan", 1));

   267                   break;

   268                 case Model.EP45_DS3R: // IT8718F

   269                 case Model.EP45_UD3R:

   270                 case Model.X38_DS5:

   271                   v.Add(new Voltage("CPU VCore", 0));

   272                   v.Add(new Voltage("DRAM", 1));

   273                   v.Add(new Voltage("+3.3V", 2));

   274                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   275                   v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));

   276                   v.Add(new Voltage("VBat", 8));

   277                   t.Add(new Temperature("System", 0));

   278                   t.Add(new Temperature("CPU", 1));

   279                   f.Add(new Fan("CPU Fan", 0));

   280                   f.Add(new Fan("System Fan #2", 1));

   281                   f.Add(new Fan("Power Fan", 2));

   282                   f.Add(new Fan("System Fan #1", 3));

   283                   break;

   284                 case Model.EX58_EXTREME: // IT8720F

   285                   v.Add(new Voltage("CPU VCore", 0));

   286                   v.Add(new Voltage("DRAM", 1));

   287                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   288                   v.Add(new Voltage("VBat", 8));

   289                   t.Add(new Temperature("System", 0));

   290                   t.Add(new Temperature("CPU", 1));

   291                   t.Add(new Temperature("Northbridge", 2));

   292                   f.Add(new Fan("CPU Fan", 0));

   293                   f.Add(new Fan("System Fan #2", 1));

   294                   f.Add(new Fan("Power Fan", 2));

   295                   f.Add(new Fan("System Fan #1", 3));

   296                   break;

   297                 case Model.P35_DS3: // IT8718F

   298                 case Model.P35_DS3L: // IT8718F

   299                   v.Add(new Voltage("CPU VCore", 0));

   300                   v.Add(new Voltage("DRAM", 1));

   301                   v.Add(new Voltage("+3.3V", 2));

   302                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   303                   v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));

   304                   v.Add(new Voltage("VBat", 8));

   305                   t.Add(new Temperature("System", 0));

   306                   t.Add(new Temperature("CPU", 1));

   307                   f.Add(new Fan("CPU Fan", 0));

   308                   f.Add(new Fan("System Fan #1", 1));

   309                   f.Add(new Fan("System Fan #2", 2));

   310                   f.Add(new Fan("Power Fan", 3));

   311                   break;

   312                 case Model.P55_UD4: // IT8720F

   313                 case Model.P55A_UD3: // IT8720F

   314                 case Model.P55M_UD4: // IT8720F

   315                 case Model.H55_USB3: // IT8720F

   316                 case Model.EX58_UD3R: // IT8720F

   317                   v.Add(new Voltage("CPU VCore", 0));

   318                   v.Add(new Voltage("DRAM", 1));

   319                   v.Add(new Voltage("+3.3V", 2));

   320                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   321                   v.Add(new Voltage("+12V", 5, 24.3f, 8.2f));

   322                   v.Add(new Voltage("VBat", 8));

   323                   t.Add(new Temperature("System", 0));

   324                   t.Add(new Temperature("CPU", 2));

   325                   f.Add(new Fan("CPU Fan", 0));

   326                   f.Add(new Fan("System Fan #2", 1));

   327                   f.Add(new Fan("Power Fan", 2));

   328                   f.Add(new Fan("System Fan #1", 3));

   329                   break;

   330                 case Model.H55N_USB3: // IT8720F

   331                   v.Add(new Voltage("CPU VCore", 0));

   332                   v.Add(new Voltage("DRAM", 1));

   333                   v.Add(new Voltage("+3.3V", 2));

   334                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   335                   v.Add(new Voltage("+12V", 5, 24.3f, 8.2f));

   336                   v.Add(new Voltage("VBat", 8));

   337                   t.Add(new Temperature("System", 0));

   338                   t.Add(new Temperature("CPU", 2));

   339                   f.Add(new Fan("CPU Fan", 0));

   340                   f.Add(new Fan("System Fan", 1));

   341                   break;

   342                 case Model.G41M_Combo: // IT8718F

   343                 case Model.G41MT_S2: // IT8718F

   344                 case Model.G41MT_S2P: // IT8718F

   345                   v.Add(new Voltage("CPU VCore", 0));

   346                   v.Add(new Voltage("DRAM", 1));

   347                   v.Add(new Voltage("+3.3V", 2));

   348                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   349                   v.Add(new Voltage("+12V", 7, 24.3f, 8.2f));

   350                   v.Add(new Voltage("VBat", 8));

   351                   t.Add(new Temperature("CPU", 2));

   352                   f.Add(new Fan("CPU Fan", 0));

   353                   f.Add(new Fan("System Fan", 1));

   354                   break;

   355                 case Model.GA_MA770T_UD3: // IT8720F

   356                 case Model.GA_MA770T_UD3P: // IT8720F

   357                 case Model.GA_MA790X_UD3P: // IT8720F

   358                   v.Add(new Voltage("CPU VCore", 0));

   359                   v.Add(new Voltage("DRAM", 1));

   360                   v.Add(new Voltage("+3.3V", 2));

   361                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   362                   v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));

   363                   v.Add(new Voltage("VBat", 8));

   364                   t.Add(new Temperature("System", 0));

   365                   t.Add(new Temperature("CPU", 1));

   366                   f.Add(new Fan("CPU Fan", 0));

   367                   f.Add(new Fan("System Fan #1", 1));

   368                   f.Add(new Fan("System Fan #2", 2));

   369                   f.Add(new Fan("Power Fan", 3));

   370                   break;

   371                 case Model.GA_MA78LM_S2H: // IT8718F

   372                   v.Add(new Voltage("CPU VCore", 0));

   373                   v.Add(new Voltage("DRAM", 1));

   374                   v.Add(new Voltage("+3.3V", 2));

   375                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   376                   v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));

   377                   v.Add(new Voltage("VBat", 8));

   378                   t.Add(new Temperature("System", 0));

   379                   t.Add(new Temperature("CPU", 1));

   380                   t.Add(new Temperature("VRM", 2));

   381                   f.Add(new Fan("CPU Fan", 0));

   382                   f.Add(new Fan("System Fan #1", 1));

   383                   f.Add(new Fan("System Fan #2", 2));

   384                   f.Add(new Fan("Power Fan", 3));

   385                   break;

   386                 case Model.GA_MA785GM_US2H: // IT8718F

   387                 case Model.GA_MA785GMT_UD2H: // IT8718F

   388                   v.Add(new Voltage("CPU VCore", 0));

   389                   v.Add(new Voltage("DRAM", 1));

   390                   v.Add(new Voltage("+3.3V", 2));

   391                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   392                   v.Add(new Voltage("+12V", 4, 24.3f, 8.2f));

   393                   v.Add(new Voltage("VBat", 8));

   394                   t.Add(new Temperature("System", 0));

   395                   t.Add(new Temperature("CPU", 1));

   396                   f.Add(new Fan("CPU Fan", 0));

   397                   f.Add(new Fan("System Fan", 1));

   398                   f.Add(new Fan("NB Fan", 2));

   399                   break;

   400                 case Model.X58A_UD3R: // IT8720F

   401                   v.Add(new Voltage("CPU VCore", 0));

   402                   v.Add(new Voltage("DRAM", 1));

   403                   v.Add(new Voltage("+3.3V", 2));

   404                   v.Add(new Voltage("+5V", 3, 6.8f, 10));

   405                   v.Add(new Voltage("+12V", 5, 24.3f, 8.2f));

   406                   v.Add(new Voltage("VBat", 8));

   407                   t.Add(new Temperature("System", 0));

   408                   t.Add(new Temperature("CPU", 1));

   409                   t.Add(new Temperature("Northbridge", 2));

   410                   f.Add(new Fan("CPU Fan", 0));

   411                   f.Add(new Fan("System Fan #2", 1));

   412                   f.Add(new Fan("Power Fan", 2));

   413                   f.Add(new Fan("System Fan #1", 3));

   414                   break;

   415                 default:

   416                   v.Add(new Voltage("CPU VCore", 0));

   417                   v.Add(new Voltage("DRAM", 1, true));

   418                   v.Add(new Voltage("+3.3V", 2, true));

   419                   v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));

   420                   v.Add(new Voltage("Voltage #5", 4, true));

   421                   v.Add(new Voltage("Voltage #6", 5, true));

   422                   v.Add(new Voltage("Voltage #7", 6, true));

   423                   v.Add(new Voltage("Voltage #8", 7, true));

   424                   v.Add(new Voltage("VBat", 8));

   425                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   426                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   427                   for (int i = 0; i < superIO.Fans.Length; i++)

   428                     f.Add(new Fan("Fan #" + (i + 1), i));

   429                   break;

   430               }

   431               break;

   433             default:

   434               v.Add(new Voltage("CPU VCore", 0));

   435               v.Add(new Voltage("Voltage #2", 1, true));

   436               v.Add(new Voltage("Voltage #3", 2, true));

   437               v.Add(new Voltage("Voltage #4", 3, true));

   438               v.Add(new Voltage("Voltage #5", 4, true));

   439               v.Add(new Voltage("Voltage #6", 5, true));

   440               v.Add(new Voltage("Voltage #7", 6, true));

   441               v.Add(new Voltage("Voltage #8", 7, true));

   442               v.Add(new Voltage("VBat", 8));

   443               for (int i = 0; i < superIO.Temperatures.Length; i++)

   444                 t.Add(new Temperature("Temperature #" + (i + 1), i));

   445               for (int i = 0; i < superIO.Fans.Length; i++)

   446                 f.Add(new Fan("Fan #" + (i + 1), i));

   447               break;

   448           }

   449           break;

   451         case Chip.IT8721F:

   452         case Chip.IT8728F:

   453         case Chip.IT8771E:

   454         case Chip.IT8772E:

   455           switch (manufacturer) {

   456             case Manufacturer.ECS:

   457               switch (model) {

   458                 case Model.A890GXM_A: // IT8721F

   459                   v.Add(new Voltage("CPU VCore", 0));

   460                   v.Add(new Voltage("VDIMM", 1));

   461                   v.Add(new Voltage("NB Voltage", 2));

   462                   v.Add(new Voltage("Analog +3.3V", 3, 10, 10));

   463                   // v.Add(new Voltage("VDIMM", 6, true));

   464                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10));

   465                   v.Add(new Voltage("VBat", 8, 10, 10));

   466                   t.Add(new Temperature("CPU", 0));

   467                   t.Add(new Temperature("System", 1));

   468                   t.Add(new Temperature("Northbridge", 2));

   469                   f.Add(new Fan("CPU Fan", 0));

   470                   f.Add(new Fan("System Fan", 1));

   471                   f.Add(new Fan("Power Fan", 2));

   472                   break;

   473                 default:

   474                   v.Add(new Voltage("Voltage #1", 0, true));

   475                   v.Add(new Voltage("Voltage #2", 1, true));

   476                   v.Add(new Voltage("Voltage #3", 2, true));

   477                   v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));

   478                   v.Add(new Voltage("Voltage #5", 4, true));

   479                   v.Add(new Voltage("Voltage #6", 5, true));

   480                   v.Add(new Voltage("Voltage #7", 6, true));

   481                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));

   482                   v.Add(new Voltage("VBat", 8, 10, 10));

   483                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   484                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   485                   for (int i = 0; i < superIO.Fans.Length; i++)

   486                     f.Add(new Fan("Fan #" + (i + 1), i));

   487                   break;

   488               }

   489               break;

   490             case Manufacturer.Gigabyte:

   491               switch (model) {

   492                 case Model.H61M_DS2_REV_1_2: // IT8728F

   493                 case Model.H61M_USB3_B3_REV_2_0: // IT8728F

   494                   v.Add(new Voltage("VTT", 0));

   495                   v.Add(new Voltage("+12V", 2, 30.9f, 10));

   496                   v.Add(new Voltage("CPU VCore", 5));

   497                   v.Add(new Voltage("DRAM", 6));

   498                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10));

   499                   v.Add(new Voltage("VBat", 8, 10, 10));

   500                   t.Add(new Temperature("System", 0));

   501                   t.Add(new Temperature("CPU", 2));

   502                   f.Add(new Fan("CPU Fan", 0));

   503                   f.Add(new Fan("System Fan", 1));

   504                   break;

   505                 case Model.H67A_UD3H_B3: // IT8728F

   506                 case Model.H67A_USB3_B3: // IT8728F

   507                   v.Add(new Voltage("VTT", 0));

   508                   v.Add(new Voltage("+5V", 1, 15, 10));

   509                   v.Add(new Voltage("+12V", 2, 30.9f, 10));

   510                   v.Add(new Voltage("CPU VCore", 5));

   511                   v.Add(new Voltage("DRAM", 6));

   512                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10));

   513                   v.Add(new Voltage("VBat", 8, 10, 10));

   514                   t.Add(new Temperature("System", 0));

   515                   t.Add(new Temperature("CPU", 2));

   516                   f.Add(new Fan("CPU Fan", 0));

   517                   f.Add(new Fan("System Fan #1", 1));

   518                   f.Add(new Fan("Power Fan", 2));

   519                   f.Add(new Fan("System Fan #2", 3));

   520                   break;

   521                 case Model.Z68A_D3H_B3: // IT8728F

   522                   v.Add(new Voltage("VTT", 0));

   523                   v.Add(new Voltage("+3.3V", 1, 6.49f, 10));

   524                   v.Add(new Voltage("+12V", 2, 30.9f, 10));

   525                   v.Add(new Voltage("+5V", 3, 7.15f, 10));

   526                   v.Add(new Voltage("CPU VCore", 5));

   527                   v.Add(new Voltage("DRAM", 6));

   528                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10));

   529                   v.Add(new Voltage("VBat", 8, 10, 10));

   530                   t.Add(new Temperature("System", 0));

   531                   t.Add(new Temperature("CPU", 2));

   532                   f.Add(new Fan("CPU Fan", 0));

   533                   f.Add(new Fan("System Fan #1", 1));

   534                   f.Add(new Fan("Power Fan", 2));

   535                   f.Add(new Fan("System Fan #2", 3));

   536                   break;

   537                 case Model.P67A_UD3_B3: // IT8728F

   538                 case Model.P67A_UD3R_B3: // IT8728F

   539                 case Model.P67A_UD4_B3: // IT8728F

   540                 case Model.Z68AP_D3: // IT8728F

   541                 case Model.Z68X_UD3H_B3: // IT8728F

   542                   v.Add(new Voltage("VTT", 0));

   543                   v.Add(new Voltage("+3.3V", 1, 6.49f, 10));

   544                   v.Add(new Voltage("+12V", 2, 30.9f, 10));

   545                   v.Add(new Voltage("+5V", 3, 7.15f, 10));

   546                   v.Add(new Voltage("CPU VCore", 5));

   547                   v.Add(new Voltage("DRAM", 6));

   548                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10));

   549                   v.Add(new Voltage("VBat", 8, 10, 10));

   550                   t.Add(new Temperature("System", 0));

   551                   t.Add(new Temperature("CPU", 2));

   552                   f.Add(new Fan("CPU Fan", 0));

   553                   f.Add(new Fan("System Fan #2", 1));

   554                   f.Add(new Fan("Power Fan", 2));

   555                   f.Add(new Fan("System Fan #1", 3));

   556                   break;

   557                 case Model.Z68X_UD7_B3: // IT8728F

   558                   v.Add(new Voltage("VTT", 0));

   559                   v.Add(new Voltage("+3.3V", 1, 6.49f, 10));

   560                   v.Add(new Voltage("+12V", 2, 30.9f, 10));

   561                   v.Add(new Voltage("+5V", 3, 7.15f, 10));

   562                   v.Add(new Voltage("CPU VCore", 5));

   563                   v.Add(new Voltage("DRAM", 6));

   564                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10));

   565                   v.Add(new Voltage("VBat", 8, 10, 10));

   566                   t.Add(new Temperature("System", 0));

   567                   t.Add(new Temperature("CPU", 1));

   568                   t.Add(new Temperature("System 3", 2));

   569                   f.Add(new Fan("CPU Fan", 0));

   570                   f.Add(new Fan("Power Fan", 1));

   571                   f.Add(new Fan("System Fan #1", 2));

   572                   f.Add(new Fan("System Fan #2", 3));

   573                   f.Add(new Fan("System Fan #3", 4));

   574                   break;

   575                 default:

   576                   v.Add(new Voltage("Voltage #1", 0, true));

   577                   v.Add(new Voltage("Voltage #2", 1, true));

   578                   v.Add(new Voltage("Voltage #3", 2, true));

   579                   v.Add(new Voltage("Voltage #4", 3, true));

   580                   v.Add(new Voltage("Voltage #5", 4, true));

   581                   v.Add(new Voltage("Voltage #6", 5, true));

   582                   v.Add(new Voltage("Voltage #7", 6, true));

   583                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));

   584                   v.Add(new Voltage("VBat", 8, 10, 10));

   585                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   586                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   587                   for (int i = 0; i < superIO.Fans.Length; i++)

   588                     f.Add(new Fan("Fan #" + (i + 1), i));

   589                   break;

   590               }

   591               break;

   592             case Manufacturer.Shuttle:

   593               switch (model) {

   594                 case Model.FH67: // IT8772E

   595                   v.Add(new Voltage("CPU VCore", 0));

   596                   v.Add(new Voltage("DRAM", 1));

   597                   v.Add(new Voltage("PCH VCCIO", 2));

   598                   v.Add(new Voltage("CPU VCCIO", 3));

   599                   v.Add(new Voltage("Graphic Voltage", 4));

   600                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10));

   601                   v.Add(new Voltage("VBat", 8, 10, 10));

   602                   t.Add(new Temperature("System", 0));

   603                   t.Add(new Temperature("CPU", 1));

   604                   f.Add(new Fan("Fan #1", 0));

   605                   f.Add(new Fan("CPU Fan", 1));

   606                   break;

   607                 default:

   608                   v.Add(new Voltage("Voltage #1", 0, true));

   609                   v.Add(new Voltage("Voltage #2", 1, true));

   610                   v.Add(new Voltage("Voltage #3", 2, true));

   611                   v.Add(new Voltage("Voltage #4", 3, true));

   612                   v.Add(new Voltage("Voltage #5", 4, true));

   613                   v.Add(new Voltage("Voltage #6", 5, true));

   614                   v.Add(new Voltage("Voltage #7", 6, true));

   615                   v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));

   616                   v.Add(new Voltage("VBat", 8, 10, 10));

   617                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   618                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   619                   for (int i = 0; i < superIO.Fans.Length; i++)

   620                     f.Add(new Fan("Fan #" + (i + 1), i));

   621                   break;

   622               }

   623               break;

   624             default:

   625               v.Add(new Voltage("Voltage #1", 0, true));

   626               v.Add(new Voltage("Voltage #2", 1, true));

   627               v.Add(new Voltage("Voltage #3", 2, true));

   628               v.Add(new Voltage("Voltage #4", 3, true));

   629               v.Add(new Voltage("Voltage #5", 4, true));

   630               v.Add(new Voltage("Voltage #6", 5, true));

   631               v.Add(new Voltage("Voltage #7", 6, true));

   632               v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));

   633               v.Add(new Voltage("VBat", 8, 10, 10));

   634               for (int i = 0; i < superIO.Temperatures.Length; i++)

   635                 t.Add(new Temperature("Temperature #" + (i + 1), i));

   636               for (int i = 0; i < superIO.Fans.Length; i++)

   637                 f.Add(new Fan("Fan #" + (i + 1), i));

   638               break;

   639           }

   640           break;

   642         case Chip.F71858:

   643           v.Add(new Voltage("VCC3V", 0, 150, 150));

   644           v.Add(new Voltage("VSB3V", 1, 150, 150));

   645           v.Add(new Voltage("Battery", 2, 150, 150));

   646           for (int i = 0; i < superIO.Temperatures.Length; i++)

   647             t.Add(new Temperature("Temperature #" + (i + 1), i));

   648           for (int i = 0; i < superIO.Fans.Length; i++)

   649             f.Add(new Fan("Fan #" + (i + 1), i));

   650           break;

   651         case Chip.F71862:

   652         case Chip.F71869:

   653         case Chip.F71882:

   654         case Chip.F71889AD:

   655         case Chip.F71889ED:

   656         case Chip.F71889F:

   657         case Chip.F71808E:

   658           switch (manufacturer) {

   659             case Manufacturer.EVGA:

   660               switch (model) {

   661                 case Model.X58_SLI_Classified: // F71882

   662                   v.Add(new Voltage("VCC3V", 0, 150, 150));

   663                   v.Add(new Voltage("CPU VCore", 1, 47, 100));

   664                   v.Add(new Voltage("DIMM", 2, 47, 100));

   665                   v.Add(new Voltage("CPU VTT", 3, 24, 100));

   666                   v.Add(new Voltage("IOH Vcore", 4, 24, 100));

   667                   v.Add(new Voltage("+5V", 5, 51, 12));

   668                   v.Add(new Voltage("+12V", 6, 56, 6.8f));

   669                   v.Add(new Voltage("3VSB", 7, 150, 150));

   670                   v.Add(new Voltage("VBat", 8, 150, 150));

   671                   t.Add(new Temperature("CPU", 0));

   672                   t.Add(new Temperature("VREG", 1));

   673                   t.Add(new Temperature("System", 2));

   674                   f.Add(new Fan("CPU Fan", 0));

   675                   f.Add(new Fan("Power Fan", 1));

   676                   f.Add(new Fan("Chassis Fan", 2));

   677                   break;

   678                 default:

   679                   v.Add(new Voltage("VCC3V", 0, 150, 150));

   680                   v.Add(new Voltage("CPU VCore", 1));

   681                   v.Add(new Voltage("Voltage #3", 2, true));

   682                   v.Add(new Voltage("Voltage #4", 3, true));

   683                   v.Add(new Voltage("Voltage #5", 4, true));

   684                   v.Add(new Voltage("Voltage #6", 5, true));

   685                   v.Add(new Voltage("Voltage #7", 6, true));

   686                   v.Add(new Voltage("VSB3V", 7, 150, 150));

   687                   v.Add(new Voltage("VBat", 8, 150, 150));

   688                   for (int i = 0; i < superIO.Temperatures.Length; i++)

   689                     t.Add(new Temperature("Temperature #" + (i + 1), i));

   690                   for (int i = 0; i < superIO.Fans.Length; i++)

   691                     f.Add(new Fan("Fan #" + (i + 1), i));

   692                   break;

   693               }

   694               break;

   695             default:

   696               v.Add(new Voltage("VCC3V", 0, 150, 150));

   697               v.Add(new Voltage("CPU VCore", 1));

   698               v.Add(new Voltage("Voltage #3", 2, true));

   699               v.Add(new Voltage("Voltage #4", 3, true));

   700               v.Add(new Voltage("Voltage #5", 4, true));

   701               v.Add(new Voltage("Voltage #6", 5, true));

   702               if (superIO.Chip != Chip.F71808E)

   703                   v.Add(new Voltage("Voltage #7", 6, true));

   704               v.Add(new Voltage("VSB3V", 7, 150, 150));

   705               v.Add(new Voltage("VBat", 8, 150, 150));

   706               for (int i = 0; i < superIO.Temperatures.Length; i++)

   707                 t.Add(new Temperature("Temperature #" + (i + 1), i));

   708               for (int i = 0; i < superIO.Fans.Length; i++)

   709                 f.Add(new Fan("Fan #" + (i + 1), i));

   710               break;

   711           }

   712           break;

   714         case Chip.W83627EHF:

   715           switch (manufacturer) {

   716             case Manufacturer.ASRock:

   717               switch (model) {

   718                 case Model.AOD790GX_128M: // W83627EHF

   719                   v.Add(new Voltage("CPU VCore", 0));

   720                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

   721                   v.Add(new Voltage("+3.3V", 4, 10, 10));

   722                   v.Add(new Voltage("+5V", 5, 20, 10));

   723                   v.Add(new Voltage("+12V", 6, 28, 5));

   724                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   725                   v.Add(new Voltage("VBAT", 8, 34, 34));

   726                   t.Add(new Temperature("CPU", 0));

   727                   t.Add(new Temperature("Motherboard", 2));

   728                   f.Add(new Fan("CPU Fan", 0));

   729                   f.Add(new Fan("Chassis Fan", 1));

   730                   break;

   731                 default:

   732                   v.Add(new Voltage("CPU VCore", 0));

   733                   v.Add(new Voltage("Voltage #2", 1, true));

   734                   v.Add(new Voltage("AVCC", 2, 34, 34));

   735                   v.Add(new Voltage("3VCC", 3, 34, 34));

   736                   v.Add(new Voltage("Voltage #5", 4, true));

   737                   v.Add(new Voltage("Voltage #6", 5, true));

   738                   v.Add(new Voltage("Voltage #7", 6, true));

   739                   v.Add(new Voltage("3VSB", 7, 34, 34));

   740                   v.Add(new Voltage("VBAT", 8, 34, 34));

   741                   v.Add(new Voltage("Voltage #10", 9, true));

   742                   t.Add(new Temperature("CPU", 0));

   743                   t.Add(new Temperature("Auxiliary", 1));

   744                   t.Add(new Temperature("System", 2));

   745                   f.Add(new Fan("System Fan", 0));

   746                   f.Add(new Fan("CPU Fan", 1));

   747                   f.Add(new Fan("Auxiliary Fan", 2));

   748                   f.Add(new Fan("CPU Fan #2", 3));

   749                   f.Add(new Fan("Auxiliary Fan #2", 4));

   750                   break;

   751               } break;

   752             default:

   753               v.Add(new Voltage("CPU VCore", 0));

   754               v.Add(new Voltage("Voltage #2", 1, true));

   755               v.Add(new Voltage("AVCC", 2, 34, 34));

   756               v.Add(new Voltage("3VCC", 3, 34, 34));

   757               v.Add(new Voltage("Voltage #5", 4, true));

   758               v.Add(new Voltage("Voltage #6", 5, true));

   759               v.Add(new Voltage("Voltage #7", 6, true));

   760               v.Add(new Voltage("3VSB", 7, 34, 34));

   761               v.Add(new Voltage("VBAT", 8, 34, 34));

   762               v.Add(new Voltage("Voltage #10", 9, true));

   763               t.Add(new Temperature("CPU", 0));

   764               t.Add(new Temperature("Auxiliary", 1));

   765               t.Add(new Temperature("System", 2));

   766               f.Add(new Fan("System Fan", 0));

   767               f.Add(new Fan("CPU Fan", 1));

   768               f.Add(new Fan("Auxiliary Fan", 2));

   769               f.Add(new Fan("CPU Fan #2", 3));

   770               f.Add(new Fan("Auxiliary Fan #2", 4));

   771               break;

   772           }

   773           break;

   774         case Chip.W83627DHG:

   775         case Chip.W83627DHGP:

   776         case Chip.W83667HG:

   777         case Chip.W83667HGB:

   778           switch (manufacturer) {

   779             case Manufacturer.ASRock:

   780               switch (model) {

   781                 case Model._880GMH_USB3: // W83627DHG-P

   782                   v.Add(new Voltage("CPU VCore", 0));

   783                   v.Add(new Voltage("+3.3V", 3, 34, 34));

   784                   v.Add(new Voltage("+5V", 5, 15, 7.5f));

   785                   v.Add(new Voltage("+12V", 6, 56, 10));

   786                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   787                   v.Add(new Voltage("VBAT", 8, 34, 34));

   788                   t.Add(new Temperature("CPU", 0));

   789                   t.Add(new Temperature("Motherboard", 2));

   790                   f.Add(new Fan("Chassis Fan", 0));

   791                   f.Add(new Fan("CPU Fan", 1));

   792                   f.Add(new Fan("Power Fan", 2));

   793                   break;

   794                 default:

   795                   v.Add(new Voltage("CPU VCore", 0));

   796                   v.Add(new Voltage("Voltage #2", 1, true));

   797                   v.Add(new Voltage("AVCC", 2, 34, 34));

   798                   v.Add(new Voltage("3VCC", 3, 34, 34));

   799                   v.Add(new Voltage("Voltage #5", 4, true));

   800                   v.Add(new Voltage("Voltage #6", 5, true));

   801                   v.Add(new Voltage("Voltage #7", 6, true));

   802                   v.Add(new Voltage("3VSB", 7, 34, 34));

   803                   v.Add(new Voltage("VBAT", 8, 34, 34));

   804                   t.Add(new Temperature("CPU", 0));

   805                   t.Add(new Temperature("Auxiliary", 1));

   806                   t.Add(new Temperature("System", 2));

   807                   f.Add(new Fan("System Fan", 0));

   808                   f.Add(new Fan("CPU Fan", 1));

   809                   f.Add(new Fan("Auxiliary Fan", 2));

   810                   f.Add(new Fan("CPU Fan #2", 3));

   811                   f.Add(new Fan("Auxiliary Fan #2", 4));

   812                   break;

   813               }

   814               break;

   815             case Manufacturer.ASUS:

   816               switch (model) {

   817                 case Model.P6T: // W83667HG

   818                 case Model.P6X58D_E: // W83667HG

   819                 case Model.Rampage_II_GENE: // W83667HG

   820                   v.Add(new Voltage("CPU VCore", 0));

   821                   v.Add(new Voltage("+12V", 1, 11.5f, 1.91f));

   822                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

   823                   v.Add(new Voltage("+3.3V", 3, 34, 34));

   824                   v.Add(new Voltage("+5V", 4, 15, 7.5f));

   825                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   826                   v.Add(new Voltage("VBAT", 8, 34, 34));

   827                   t.Add(new Temperature("CPU", 0));

   828                   t.Add(new Temperature("Motherboard", 2));

   829                   f.Add(new Fan("Chassis Fan #1", 0));

   830                   f.Add(new Fan("CPU Fan", 1));

   831                   f.Add(new Fan("Power Fan", 2));

   832                   f.Add(new Fan("Chassis Fan #2", 3));

   833                   f.Add(new Fan("Chassis Fan #3", 4));

   834                   break;

   835                 case Model.Rampage_Extreme: // W83667HG

   836                   v.Add(new Voltage("CPU VCore", 0));

   837                   v.Add(new Voltage("+12V", 1, 12, 2));

   838                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

   839                   v.Add(new Voltage("+3.3V", 3, 34, 34));

   840                   v.Add(new Voltage("+5V", 4, 15, 7.5f));

   841                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   842                   v.Add(new Voltage("VBAT", 8, 34, 34));

   843                   t.Add(new Temperature("CPU", 0));

   844                   t.Add(new Temperature("Motherboard", 2));

   845                   f.Add(new Fan("Chassis Fan #1", 0));

   846                   f.Add(new Fan("CPU Fan", 1));

   847                   f.Add(new Fan("Power Fan", 2));

   848                   f.Add(new Fan("Chassis Fan #2", 3));

   849                   f.Add(new Fan("Chassis Fan #3", 4));

   850                   break;

   851                 default:

   852                   v.Add(new Voltage("CPU VCore", 0));

   853                   v.Add(new Voltage("Voltage #2", 1, true));

   854                   v.Add(new Voltage("AVCC", 2, 34, 34));

   855                   v.Add(new Voltage("3VCC", 3, 34, 34));

   856                   v.Add(new Voltage("Voltage #5", 4, true));

   857                   v.Add(new Voltage("Voltage #6", 5, true));

   858                   v.Add(new Voltage("Voltage #7", 6, true));

   859                   v.Add(new Voltage("3VSB", 7, 34, 34));

   860                   v.Add(new Voltage("VBAT", 8, 34, 34));

   861                   t.Add(new Temperature("CPU", 0));

   862                   t.Add(new Temperature("Auxiliary", 1));

   863                   t.Add(new Temperature("System", 2));

   864                   f.Add(new Fan("System Fan", 0));

   865                   f.Add(new Fan("CPU Fan", 1));

   866                   f.Add(new Fan("Auxiliary Fan", 2));

   867                   f.Add(new Fan("CPU Fan #2", 3));

   868                   f.Add(new Fan("Auxiliary Fan #2", 4));

   869                   break;

   870               }

   871               break;

   872             default:

   873               v.Add(new Voltage("CPU VCore", 0));

   874               v.Add(new Voltage("Voltage #2", 1, true));

   875               v.Add(new Voltage("AVCC", 2, 34, 34));

   876               v.Add(new Voltage("3VCC", 3, 34, 34));

   877               v.Add(new Voltage("Voltage #5", 4, true));

   878               v.Add(new Voltage("Voltage #6", 5, true));

   879               v.Add(new Voltage("Voltage #7", 6, true));

   880               v.Add(new Voltage("3VSB", 7, 34, 34));

   881               v.Add(new Voltage("VBAT", 8, 34, 34));

   882               t.Add(new Temperature("CPU", 0));

   883               t.Add(new Temperature("Auxiliary", 1));

   884               t.Add(new Temperature("System", 2));

   885               f.Add(new Fan("System Fan", 0));

   886               f.Add(new Fan("CPU Fan", 1));

   887               f.Add(new Fan("Auxiliary Fan", 2));

   888               f.Add(new Fan("CPU Fan #2", 3));

   889               f.Add(new Fan("Auxiliary Fan #2", 4));

   890               break;

   891           }

   892           break;

   893         case Chip.W83627HF:

   894         case Chip.W83627THF:

   895         case Chip.W83687THF:

   896           v.Add(new Voltage("CPU VCore", 0));

   897           v.Add(new Voltage("Voltage #2", 1, true));

   898           v.Add(new Voltage("Voltage #3", 2, true));

   899           v.Add(new Voltage("AVCC", 3, 34, 51));

   900           v.Add(new Voltage("Voltage #5", 4, true));

   901           v.Add(new Voltage("5VSB", 5, 34, 51));

   902           v.Add(new Voltage("VBAT", 6));

   903           t.Add(new Temperature("CPU", 0));

   904           t.Add(new Temperature("Auxiliary", 1));

   905           t.Add(new Temperature("System", 2));

   906           f.Add(new Fan("System Fan", 0));

   907           f.Add(new Fan("CPU Fan", 1));

   908           f.Add(new Fan("Auxiliary Fan", 2));

   909           break;

   910         case Chip.NCT6771F:

   911         case Chip.NCT6776F:

   912           switch (manufacturer) {

   913             case Manufacturer.ASUS:

   914               switch (model) {

   915                 case Model.P8P67: // NCT6776F

   916                 case Model.P8P67_EVO: // NCT6776F

   917                 case Model.P8P67_PRO: // NCT6776F

   918                   v.Add(new Voltage("CPU VCore", 0));

   919                   v.Add(new Voltage("+12V", 1, 11, 1));

   920                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

   921                   v.Add(new Voltage("+3.3V", 3, 34, 34));

   922                   v.Add(new Voltage("+5V", 4, 12, 3));

   923                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   924                   v.Add(new Voltage("VBAT", 8, 34, 34));

   925                   t.Add(new Temperature("CPU", 0));

   926                   t.Add(new Temperature("Auxiliary", 2));

   927                   t.Add(new Temperature("Motherboard", 3));

   928                   f.Add(new Fan("Chassis Fan #1", 0));

   929                   f.Add(new Fan("CPU Fan", 1));

   930                   f.Add(new Fan("Power Fan", 2));

   931                   f.Add(new Fan("Chassis Fan #2", 3));

   932                   c.Add(new Ctrl("Chassis Fan #2", 0));

   933                   c.Add(new Ctrl("CPU Fan", 1));

   934                   c.Add(new Ctrl("Chassis Fan #1", 2));

   935                   break;

   936                 case Model.P8P67_M_PRO: // NCT6776F

   937                   v.Add(new Voltage("CPU VCore", 0));

   938                   v.Add(new Voltage("+12V", 1, 11, 1));

   939                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

   940                   v.Add(new Voltage("+3.3V", 3, 34, 34));

   941                   v.Add(new Voltage("+5V", 4, 12, 3));

   942                   v.Add(new Voltage("Voltage #6", 5, true));

   943                   v.Add(new Voltage("Voltage #7", 6, true));

   944                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   945                   v.Add(new Voltage("VBAT", 8, 34, 34));

   946                   t.Add(new Temperature("CPU", 0));

   947                   t.Add(new Temperature("Motherboard", 3));

   948                   f.Add(new Fan("Chassis Fan #1", 0));

   949                   f.Add(new Fan("CPU Fan", 1));

   950                   f.Add(new Fan("Chassis Fan #2", 2));

   951                   f.Add(new Fan("Power Fan", 3));

   952                   f.Add(new Fan("Auxiliary Fan", 4));

   953                   break;

   954                 case Model.P8Z68_V_PRO: // NCT6776F

   955                   v.Add(new Voltage("CPU VCore", 0));

   956                   v.Add(new Voltage("+12V", 1, 11, 1));

   957                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

   958                   v.Add(new Voltage("+3.3V", 3, 34, 34));

   959                   v.Add(new Voltage("+5V", 4, 12, 3));

   960                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   961                   v.Add(new Voltage("VBAT", 8, 34, 34));

   962                   t.Add(new Temperature("CPU", 0));

   963                   t.Add(new Temperature("Auxiliary", 2));

   964                   t.Add(new Temperature("Motherboard", 3));

   965                   for (int i = 0; i < superIO.Fans.Length; i++)

   966                     f.Add(new Fan("Fan #" + (i + 1), i));

   967                   for (int i = 0; i < superIO.Controls.Length; i++)

   968                     c.Add(new Ctrl("Fan #" + (i + 1), i));

   969                   break;

   970                 case Model.P9X79: // NCT6776F

   971                   v.Add(new Voltage("CPU VCore", 0));

   972                   v.Add(new Voltage("+12V", 1, 11, 1));

   973                   v.Add(new Voltage("Analog +3.3V", 2, 34, 34));

   974                   v.Add(new Voltage("+3.3V", 3, 34, 34));

   975                   v.Add(new Voltage("+5V", 4, 12, 3));

   976                   v.Add(new Voltage("Standby +3.3V", 7, 34, 34));

   977                   v.Add(new Voltage("VBAT", 8, 34, 34));

   978                   t.Add(new Temperature("CPU", 0));

   979                   t.Add(new Temperature("Motherboard", 3));

   980                   for (int i = 0; i < superIO.Fans.Length; i++)

   981                     f.Add(new Fan("Fan #" + (i + 1), i));

   982                   break;

   983                 default:

   984                   v.Add(new Voltage("CPU VCore", 0));

   985                   v.Add(new Voltage("Voltage #2", 1, true));

   986                   v.Add(new Voltage("AVCC", 2, 34, 34));

   987                   v.Add(new Voltage("3VCC", 3, 34, 34));

   988                   v.Add(new Voltage("Voltage #5", 4, true));

   989                   v.Add(new Voltage("Voltage #6", 5, true));

   990                   v.Add(new Voltage("Voltage #7", 6, true));

   991                   v.Add(new Voltage("3VSB", 7, 34, 34));

   992                   v.Add(new Voltage("VBAT", 8, 34, 34));

   993                   t.Add(new Temperature("CPU Core", 0));

   994                   t.Add(new Temperature("Temperature #1", 1));

   995                   t.Add(new Temperature("Temperature #2", 2));

   996                   t.Add(new Temperature("Temperature #3", 3));

   997                   for (int i = 0; i < superIO.Fans.Length; i++)

   998                     f.Add(new Fan("Fan #" + (i + 1), i));

   999                   break;

  1000               }

  1001               break;

  1002             default:

  1003               v.Add(new Voltage("CPU VCore", 0));

  1004               v.Add(new Voltage("Voltage #2", 1, true));

  1005               v.Add(new Voltage("AVCC", 2, 34, 34));

  1006               v.Add(new Voltage("3VCC", 3, 34, 34));

  1007               v.Add(new Voltage("Voltage #5", 4, true));

  1008               v.Add(new Voltage("Voltage #6", 5, true));

  1009               v.Add(new Voltage("Voltage #7", 6, true));

  1010               v.Add(new Voltage("3VSB", 7, 34, 34));

  1011               v.Add(new Voltage("VBAT", 8, 34, 34));

  1012               t.Add(new Temperature("CPU Core", 0));

  1013               t.Add(new Temperature("Temperature #1", 1));

  1014               t.Add(new Temperature("Temperature #2", 2));

  1015               t.Add(new Temperature("Temperature #3", 3));

  1016               for (int i = 0; i < superIO.Fans.Length; i++)

  1017                 f.Add(new Fan("Fan #" + (i + 1), i));

  1018               break;

  1019           }

  1020           break;

  1021         case Chip.NCT6779D:

  1022           switch (manufacturer) {

  1023             case Manufacturer.ASUS:

  1024               switch (model) {

  1025                 case Model.P8Z77_V:

  1026                   v.Add(new Voltage("CPU VCore", 0));

  1027                   v.Add(new Voltage("Voltage #2", 1, true));

  1028                   v.Add(new Voltage("AVCC", 2, 34, 34));

  1029                   v.Add(new Voltage("3VCC", 3, 34, 34));

  1030                   v.Add(new Voltage("Voltage #5", 4, true));

  1031                   v.Add(new Voltage("Voltage #6", 5, true));

  1032                   v.Add(new Voltage("Voltage #7", 6, true));

  1033                   v.Add(new Voltage("3VSB", 7, 34, 34));

  1034                   v.Add(new Voltage("VBAT", 8, 34, 34));

  1035                   v.Add(new Voltage("VTT", 9));

  1036                   v.Add(new Voltage("Voltage #11", 10, true));

  1037                   v.Add(new Voltage("Voltage #12", 11, true));

  1038                   v.Add(new Voltage("Voltage #13", 12, true));

  1039                   v.Add(new Voltage("Voltage #14", 13, true));

  1040                   v.Add(new Voltage("Voltage #15", 14, true));

  1041                   t.Add(new Temperature("CPU Core", 0));

  1042                   t.Add(new Temperature("Auxiliary", 1));

  1043                   t.Add(new Temperature("Motherboard", 2));

  1044                   f.Add(new Fan("Chassis Fan #1", 0));

  1045                   f.Add(new Fan("CPU Fan", 1));

  1046                   f.Add(new Fan("Chassis Fan #2", 2));

  1047                   f.Add(new Fan("Chassis Fan #3", 3));

  1048                   c.Add(new Ctrl("Chassis Fan #1", 0));

  1049                   c.Add(new Ctrl("CPU  Fan", 1));

  1050                   c.Add(new Ctrl("Chassis Fan #2", 2));

  1051                   c.Add(new Ctrl("Chassis Fan #3", 3));

  1052                   break;

  1053                 default:

  1054                   v.Add(new Voltage("CPU VCore", 0));

  1055                   v.Add(new Voltage("Voltage #2", 1, true));

  1056                   v.Add(new Voltage("AVCC", 2, 34, 34));

  1057                   v.Add(new Voltage("3VCC", 3, 34, 34));

  1058                   v.Add(new Voltage("Voltage #5", 4, true));

  1059                   v.Add(new Voltage("Voltage #6", 5, true));

  1060                   v.Add(new Voltage("Voltage #7", 6, true));

  1061                   v.Add(new Voltage("3VSB", 7, 34, 34));

  1062                   v.Add(new Voltage("VBAT", 8, 34, 34));

  1063                   v.Add(new Voltage("VTT", 9));

  1064                   v.Add(new Voltage("Voltage #11", 10, true));

  1065                   v.Add(new Voltage("Voltage #12", 11, true));

  1066                   v.Add(new Voltage("Voltage #13", 12, true));

  1067                   v.Add(new Voltage("Voltage #14", 13, true));

  1068                   v.Add(new Voltage("Voltage #15", 14, true));

  1069                   t.Add(new Temperature("CPU Core", 0));

  1070                   t.Add(new Temperature("Temperature #1", 1));

  1071                   t.Add(new Temperature("Temperature #2", 2));

  1072                   t.Add(new Temperature("Temperature #3", 3));

  1073                   t.Add(new Temperature("Temperature #4", 4));

  1074                   t.Add(new Temperature("Temperature #5", 5));

  1075                   t.Add(new Temperature("Temperature #6", 6));

  1076                   for (int i = 0; i < superIO.Fans.Length; i++)

  1077                     f.Add(new Fan("Fan #" + (i + 1), i));

  1078                   for (int i = 0; i < superIO.Controls.Length; i++)

  1079                     c.Add(new Ctrl("Fan Control #" + (i + 1), i));

  1080                   break;

  1081               }

  1082               break;

  1083             default:

  1084               v.Add(new Voltage("CPU VCore", 0));

  1085               v.Add(new Voltage("Voltage #2", 1, true));

  1086               v.Add(new Voltage("AVCC", 2, 34, 34));

  1087               v.Add(new Voltage("3VCC", 3, 34, 34));

  1088               v.Add(new Voltage("Voltage #5", 4, true));

  1089               v.Add(new Voltage("Voltage #6", 5, true));

  1090               v.Add(new Voltage("Voltage #7", 6, true));

  1091               v.Add(new Voltage("3VSB", 7, 34, 34));

  1092               v.Add(new Voltage("VBAT", 8, 34, 34));

  1093               v.Add(new Voltage("VTT", 9));

  1094               v.Add(new Voltage("Voltage #11", 10, true));

  1095               v.Add(new Voltage("Voltage #12", 11, true));

  1096               v.Add(new Voltage("Voltage #13", 12, true));

  1097               v.Add(new Voltage("Voltage #14", 13, true));

  1098               v.Add(new Voltage("Voltage #15", 14, true));

  1099               t.Add(new Temperature("CPU Core", 0));

  1100               t.Add(new Temperature("Temperature #1", 1));

  1101               t.Add(new Temperature("Temperature #2", 2));

  1102               t.Add(new Temperature("Temperature #3", 3));

  1103               t.Add(new Temperature("Temperature #4", 4));

  1104               t.Add(new Temperature("Temperature #5", 5));

  1105               t.Add(new Temperature("Temperature #6", 6));

  1106               for (int i = 0; i < superIO.Fans.Length; i++)

  1107                 f.Add(new Fan("Fan #" + (i + 1), i));

  1108               for (int i = 0; i < superIO.Controls.Length; i++)

  1109                 c.Add(new Ctrl("Fan Control #" + (i + 1), i));

  1110               break;

  1111           }

  1112           break;

  1113         default:

  1114           for (int i = 0; i < superIO.Voltages.Length; i++)

  1115             v.Add(new Voltage("Voltage #" + (i + 1), i, true));

  1116           for (int i = 0; i < superIO.Temperatures.Length; i++)

  1117             t.Add(new Temperature("Temperature #" + (i + 1), i));

  1118           for (int i = 0; i < superIO.Fans.Length; i++)

  1119             f.Add(new Fan("Fan #" + (i + 1), i));

  1120           for (int i = 0; i < superIO.Controls.Length; i++)

  1121             c.Add(new Ctrl("Fan Control #" + (i + 1), i));

  1122           break;

  1123       }

  1125       const string formula = "Voltage = value + (value - Vf) * Ri / Rf.";

  1126       foreach (Voltage voltage in v)

  1127         if (voltage.Index < superIO.Voltages.Length) {

  1128           Sensor sensor = new Sensor(voltage.Name, voltage.Index,

  1129             voltage.Hidden, SensorType.Voltage, this, new [] {

  1130             new ParameterDescription("Ri [kΩ]", "Input resistance.\n" +

  1131               formula, voltage.Ri),

  1132             new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" +

  1133               formula, voltage.Rf),

  1134             new ParameterDescription("Vf [V]", "Reference voltage.\n" +

  1135               formula, voltage.Vf)

  1136             }, settings);

  1137           voltages.Add(sensor);

  1138       }

  1140       foreach (Temperature temperature in t)

  1141         if (temperature.Index < superIO.Temperatures.Length) {

  1142         Sensor sensor = new Sensor(temperature.Name, temperature.Index,

  1143           SensorType.Temperature, this, new [] {

  1144           new ParameterDescription("Offset [°C]", "Temperature offset.", 0)

  1145         }, settings);

  1146         temperatures.Add(sensor);

  1147       }

  1149       foreach (Fan fan in f)

  1150         if (fan.Index < superIO.Fans.Length) {

  1151           Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,

  1152             this, settings);

  1153           fans.Add(sensor);

  1154         }

  1156       foreach (Ctrl ctrl in c) {

  1157         int index = ctrl.Index;

  1158         if (index < superIO.Controls.Length) {

  1159           Sensor sensor = new Sensor(ctrl.Name, index, SensorType.Control,

  1160             this, settings);

  1161           Control control = new Control(sensor, settings, 0, 100);

  1162           control.ControlModeChanged += (cc) => {

  1163             if (cc.ControlMode == ControlMode.Default) {

  1164               superIO.SetControl(index, null);

  1165             } else {

  1166               superIO.SetControl(index, (byte)(cc.SoftwareValue * 2.55));

  1167             }

  1168           };

  1169           control.SoftwareControlValueChanged += (cc) => {

  1170             if (cc.ControlMode == ControlMode.Software)

  1171               superIO.SetControl(index, (byte)(cc.SoftwareValue * 2.55));

  1172           };

  1173           if (control.ControlMode == ControlMode.Software)

  1174             superIO.SetControl(index, (byte)(control.SoftwareValue * 2.55));

  1175           sensor.Control = control;

  1176           controls.Add(sensor);

  1177         }

  1178       }

  1179     }

  1181     public override HardwareType HardwareType {

  1182       get { return HardwareType.SuperIO; }

  1183     }

  1185     public override IHardware Parent {

  1186       get { return mainboard; }

  1187     }

  1190     public override string GetReport() {

  1191       return superIO.GetReport();

  1192     }

  1194     public override void Update() {

  1195       superIO.Update();

  1197       foreach (Sensor sensor in voltages) {

  1198         float? value = readVoltage(sensor.Index);

  1199         if (value.HasValue) {

  1200           sensor.Value = value + (value - sensor.Parameters[2].Value) *

  1201             sensor.Parameters[0].Value / sensor.Parameters[1].Value;

  1202           ActivateSensor(sensor);

  1203         }

  1204       }

  1206       foreach (Sensor sensor in temperatures) {

  1207         float? value = readTemperature(sensor.Index);

  1208         if (value.HasValue) {

  1209           sensor.Value = value + sensor.Parameters[0].Value;

  1210           ActivateSensor(sensor);

  1211         }

  1212       }

  1214       foreach (Sensor sensor in fans) {

  1215         float? value = readFan(sensor.Index);

  1216         if (value.HasValue) {

  1217           sensor.Value = value;

  1218           if (value.Value > 0)

  1219             ActivateSensor(sensor);

  1220         }

  1221       }

  1223       foreach (Sensor sensor in controls) {

  1224         float? value = readControl(sensor.Index);

  1225         if (value.HasValue) {

  1226           sensor.Value = value;

  1227           ActivateSensor(sensor);

  1228         }

  1229       }

  1231       postUpdate();

  1232     }

  1234     public override void Close() {

  1235       foreach (Sensor sensor in controls) {

  1236         // restore all controls back to default

  1237         superIO.SetControl(sensor.Index, null);

  1238       }

  1239       base.Close();

  1240     }

  1242     private class Voltage {

  1243       public readonly string Name;

  1244       public readonly int Index;

  1245       public readonly float Ri;

  1246       public readonly float Rf;

  1247       public readonly float Vf;

  1248       public readonly bool Hidden;

  1250       public Voltage(string name, int index) :

  1251         this(name, index, false) { }

  1253       public Voltage(string name, int index, bool hidden) :

  1254         this(name, index, 0, 1, 0, hidden) { }

  1256       public Voltage(string name, int index, float ri, float rf) :

  1257         this(name, index, ri, rf, 0, false) { }

  1259       // float ri = 0, float rf = 1, float vf = 0, bool hidden = false)

  1261       public Voltage(string name, int index,

  1262         float ri, float rf, float vf, bool hidden)

  1263       {

  1264         this.Name = name;

  1265         this.Index = index;

  1266         this.Ri = ri;

  1267         this.Rf = rf;

  1268         this.Vf = vf;

  1269         this.Hidden = hidden;

  1270       }

  1271     }

  1273     private class Temperature {

  1274       public readonly string Name;

  1275       public readonly int Index;

  1277       public Temperature(string name, int index) {

  1278         this.Name = name;

  1279         this.Index = index;

  1280       }

  1281     }

  1283     private class Fan {

  1284       public readonly string Name;

  1285       public readonly int Index;

  1287       public Fan(string name, int index) {

  1288         this.Name = name;

  1289         this.Index = index;

  1290       }

  1291     }

  1293     private class Ctrl {

  1294       public readonly string Name;

  1295       public readonly int Index;

  1297       public Ctrl(string name, int index) {

  1298         this.Name = name;

  1299         this.Index = index;

  1300       }

  1301     }

  1302   }

  1303 }

author	moel.mich
	Wed, 18 Jul 2012 22:47:30 +0000
changeset 368	1036b453f1f6
parent 359	30bb76a1da24
child 382	ba6abd47a80c
permissions	-rw-r--r--