/*

  This Source Code Form is subject to the terms of the Mozilla Public

  License, v. 2.0. If a copy of the MPL was not distributed with this

  file, You can obtain one at http://mozilla.org/MPL/2.0/.

  Copyright (C) 2010-2012 Michael Möller <mmoeller@openhardwaremonitor.org>

*/

using System;

using System.Globalization;

using System.Text;

namespace OpenHardwareMonitor.Hardware.LPC {

  internal class NCT677X : ISuperIO {

    private readonly ushort port;

    private readonly byte revision;

    private readonly Chip chip;

    private readonly float?[] voltages;

    private readonly float?[] temperatures;

    private readonly float?[] fans ;

    private readonly float?[] controls;

    // Hardware Monitor

    private const uint ADDRESS_REGISTER_OFFSET = 0x05;

    private const uint DATA_REGISTER_OFFSET = 0x06;

    private const byte BANK_SELECT_REGISTER = 0x4E;

    private byte ReadByte(ushort address) {

      byte bank = (byte)(address >> 8);

      byte register = (byte)(address & 0xFF);

      Ring0.WriteIoPort(port + ADDRESS_REGISTER_OFFSET, BANK_SELECT_REGISTER);

      Ring0.WriteIoPort(port + DATA_REGISTER_OFFSET, bank);

      Ring0.WriteIoPort(port + ADDRESS_REGISTER_OFFSET, register);

      return Ring0.ReadIoPort(port + DATA_REGISTER_OFFSET);

    }

    private void WriteByte(ushort address, byte value) {

      byte bank = (byte)(address >> 8);

      byte register = (byte)(address & 0xFF);

      Ring0.WriteIoPort(port + ADDRESS_REGISTER_OFFSET, BANK_SELECT_REGISTER);

      Ring0.WriteIoPort(port + DATA_REGISTER_OFFSET, bank);

      Ring0.WriteIoPort(port + ADDRESS_REGISTER_OFFSET, register);

      Ring0.WriteIoPort(port + DATA_REGISTER_OFFSET, value);

    }

    // Consts 

    private const ushort NUVOTON_VENDOR_ID = 0x5CA3;

    // Hardware Monitor Registers    

    private const ushort VENDOR_ID_HIGH_REGISTER = 0x804F;

    private const ushort VENDOR_ID_LOW_REGISTER = 0x004F;  

    private readonly ushort[] FAN_PWM_OUT_REG = 

      { 0x001, 0x003, 0x011, 0x013, 0x015 };

    private readonly ushort[] FAN_PWM_COMMAND_REG = 

      { 0x109, 0x209, 0x309, 0x809, 0x909 };

    private readonly ushort[] FAN_CONTROL_MODE_REG = 

      { 0x102, 0x202, 0x302, 0x802, 0x902 };

    private readonly ushort fanRpmBaseRegister;

    private readonly int minFanRPM;

    private bool[] restoreDefaultFanControlRequired = new bool[5];       

    private byte[] initialFanControlMode = new byte[5];

    private byte[] initialFanPwmCommand = new byte[5];

    private readonly ushort[] voltageRegisters;

    private readonly ushort voltageVBatRegister;

    private readonly byte[] temperaturesSource;

    private readonly ushort[] temperatureRegister;

    private readonly ushort[] temperatureHalfRegister;

    private readonly int[] temperatureHalfBit;  

    private readonly ushort[] temperatureSourceRegister;        

    private readonly ushort?[] alternateTemperatureRegister;

    private enum SourceNCT6771F : byte {

      SYSTIN = 1,

      CPUTIN = 2,

      AUXTIN = 3,

      SMBUSMASTER = 4,

      PECI_0 = 5, 

      PECI_1 = 6, 

      PECI_2 = 7,

      PECI_3 = 8,

      PECI_4 = 9,

      PECI_5 = 10,

      PECI_6 = 11,

      PECI_7 = 12,

      PCH_CHIP_CPU_MAX_TEMP = 13,

      PCH_CHIP_TEMP = 14,

      PCH_CPU_TEMP = 15,

      PCH_MCH_TEMP = 16, 

      PCH_DIM0_TEMP = 17,

      PCH_DIM1_TEMP = 18,

      PCH_DIM2_TEMP = 19,

      PCH_DIM3_TEMP = 20

    }

    private enum SourceNCT6776F : byte {

      SYSTIN = 1,

      CPUTIN = 2,

      AUXTIN = 3,

      SMBUSMASTER_0 = 4,

      SMBUSMASTER_1 = 5,

      SMBUSMASTER_2 = 6,

      SMBUSMASTER_3 = 7,

      SMBUSMASTER_4 = 8,

      SMBUSMASTER_5 = 9,

      SMBUSMASTER_6 = 10,

      SMBUSMASTER_7 = 11,

      PECI_0 = 12,

      PECI_1 = 13,

      PCH_CHIP_CPU_MAX_TEMP = 14,

      PCH_CHIP_TEMP = 15,

      PCH_CPU_TEMP = 16,

      PCH_MCH_TEMP = 17,

      PCH_DIM0_TEMP = 18,

      PCH_DIM1_TEMP = 19,

      PCH_DIM2_TEMP = 20,

      PCH_DIM3_TEMP = 21,

      BYTE_TEMP = 22

    }

    private enum SourceNCT6779D : byte {

      SYSTIN = 1,

      CPUTIN = 2,

      AUXTIN0 = 3,

      AUXTIN1 = 4,

      AUXTIN2 = 5,

      AUXTIN3 = 6,      

      SMBUSMASTER_0 = 8,

      SMBUSMASTER_1 = 9,

      SMBUSMASTER_2 = 10,

      SMBUSMASTER_3 = 11,

      SMBUSMASTER_4 = 12,

      SMBUSMASTER_5 = 13,

      SMBUSMASTER_6 = 14,

      SMBUSMASTER_7 = 15,

      PECI_0 = 16,

      PECI_1 = 17,

      PCH_CHIP_CPU_MAX_TEMP = 18,

      PCH_CHIP_TEMP = 19,

      PCH_CPU_TEMP = 20,

      PCH_MCH_TEMP = 21,

      PCH_DIM0_TEMP = 22,

      PCH_DIM1_TEMP = 23,

      PCH_DIM2_TEMP = 24,

      PCH_DIM3_TEMP = 25,

      BYTE_TEMP = 26

    }

    public NCT677X(Chip chip, byte revision, ushort port) {

      this.chip = chip;

      this.revision = revision;

      this.port = port;

      if (!IsNuvotonVendor())

        return;

      switch (chip) {

        case Chip.NCT6771F:

        case Chip.NCT6776F:          

          if (chip == Chip.NCT6771F) {

            fans = new float?[4];

            // min value RPM value with 16-bit fan counter

            minFanRPM = (int)(1.35e6 / 0xFFFF);

            temperaturesSource = new byte[] {

              (byte)SourceNCT6771F.PECI_0,

              (byte)SourceNCT6771F.CPUTIN,

              (byte)SourceNCT6771F.AUXTIN,

              (byte)SourceNCT6771F.SYSTIN

            };            

          } else {

            fans = new float?[5];

            // min value RPM value with 13-bit fan counter

            minFanRPM = (int)(1.35e6 / 0x1FFF);

            temperaturesSource = new byte[] {

              (byte)SourceNCT6776F.PECI_0,

              (byte)SourceNCT6776F.CPUTIN,

              (byte)SourceNCT6776F.AUXTIN,

              (byte)SourceNCT6776F.SYSTIN 

            };

          }

          fanRpmBaseRegister = 0x656;

          controls = new float?[3];

          voltages = new float?[9];

          voltageRegisters = new ushort[] 

            { 0x020, 0x021, 0x022, 0x023, 0x024, 0x025, 0x026, 0x550, 0x551 };

          voltageVBatRegister = 0x551;

          temperatures = new float?[4];

          temperatureRegister = new ushort[]

            { 0x027, 0x073, 0x075, 0x077, 0x150, 0x250, 0x62B, 0x62C, 0x62D };

          temperatureHalfRegister = new ushort[]

            { 0, 0x074, 0x076, 0x078, 0x151, 0x251, 0x62E, 0x62E, 0x62E };

          temperatureHalfBit = new int[] 

            { -1, 7, 7, 7, 7, 7, 0, 1, 2 };

          temperatureSourceRegister = new ushort[]

            { 0x621, 0x100, 0x200, 0x300, 0x622, 0x623, 0x624, 0x625, 0x626 };

          alternateTemperatureRegister = new ushort?[] 

            { null, null, null, null };

          break;

        case Chip.NCT6779D:

          fans = new float?[5];

          fanRpmBaseRegister = 0x4C0;

          // min value RPM value with 13-bit fan counter

          minFanRPM = (int)(1.35e6 / 0x1FFF);

          controls = new float?[5];

          voltages = new float?[15];

          voltageRegisters = new ushort[] 

            { 0x480, 0x481, 0x482, 0x483, 0x484, 0x485, 0x486, 0x487, 0x488, 

              0x489, 0x48A, 0x48B, 0x48C, 0x48D, 0x48E };

          voltageVBatRegister = 0x488;

          temperatures = new float?[7];

          temperaturesSource = new byte[] {

            (byte)SourceNCT6779D.PECI_0,

            (byte)SourceNCT6779D.CPUTIN,

            (byte)SourceNCT6779D.SYSTIN,

            (byte)SourceNCT6779D.AUXTIN0,

            (byte)SourceNCT6779D.AUXTIN1,

            (byte)SourceNCT6779D.AUXTIN2,

            (byte)SourceNCT6779D.AUXTIN3

          };

          temperatureRegister = new ushort[]

            { 0x027, 0x073, 0x075, 0x077, 0x079, 0x07B, 0x150 };

          temperatureHalfRegister = new ushort[]

            { 0, 0x074, 0x076, 0x078, 0x07A, 0x07C, 0x151 };              

          temperatureHalfBit = new int[]

            { -1, 7, 7, 7, 7, 7, 7 };

          temperatureSourceRegister = new ushort[] 

            { 0x621, 0x100, 0x200, 0x300, 0x800, 0x900, 0x622 };

          alternateTemperatureRegister = new ushort?[] 

            {null, 0x491, 0x490, 0x492, 0x493, 0x494, 0x495 };

          break;        

      }

    }

    private bool IsNuvotonVendor() {

      return ((ReadByte(VENDOR_ID_HIGH_REGISTER) << 8) |

        ReadByte(VENDOR_ID_LOW_REGISTER)) == NUVOTON_VENDOR_ID;

    }

    public byte? ReadGPIO(int index) {

      return null;

    }

    public void WriteGPIO(int index, byte value) { }

    private void SaveDefaultFanControl(int index) {

      if (!restoreDefaultFanControlRequired[index]) {

        initialFanControlMode[index] = ReadByte(FAN_CONTROL_MODE_REG[index]);

        initialFanPwmCommand[index] = ReadByte(FAN_PWM_COMMAND_REG[index]);

        restoreDefaultFanControlRequired[index] = true;

      }

    }

    private void RestoreDefaultFanControl(int index) {

      if (restoreDefaultFanControlRequired[index]) {

        WriteByte(FAN_CONTROL_MODE_REG[index], initialFanControlMode[index]);

        WriteByte(FAN_PWM_COMMAND_REG[index], initialFanPwmCommand[index]);

        restoreDefaultFanControlRequired[index] = false;

      }

    }

    public void SetControl(int index, byte? value) {

      if (index < 0 || index >= controls.Length)

        throw new ArgumentOutOfRangeException("index");

      if (!Ring0.WaitIsaBusMutex(10))

        return;

      if (value.HasValue) {

        SaveDefaultFanControl(index);

        // set manual mode

        WriteByte(FAN_CONTROL_MODE_REG[index], 0);

        // set output value

        WriteByte(FAN_PWM_COMMAND_REG[index], value.Value);  

      } else {

        RestoreDefaultFanControl(index);

      }

      Ring0.ReleaseIsaBusMutex();

    }   

    public Chip Chip { get { return chip; } }

    public float?[] Voltages { get { return voltages; } }

    public float?[] Temperatures { get { return temperatures; } }

    public float?[] Fans { get { return fans; } }

    public float?[] Controls { get { return controls; } }

    public void Update() {

      if (!Ring0.WaitIsaBusMutex(10))

        return;

      for (int i = 0; i < voltages.Length; i++) {

        float value = 0.008f * ReadByte(voltageRegisters[i]);

        bool valid = value > 0;

        // check if battery voltage monitor is enabled

        if (valid && voltageRegisters[i] == voltageVBatRegister) 

          valid = (ReadByte(0x005D) & 0x01) > 0;

        voltages[i] = valid ? value : (float?)null;

      }

      int temperatureSourceMask = 0;

      for (int i = temperatureRegister.Length - 1; i >= 0 ; i--) {

        int value = ((sbyte)ReadByte(temperatureRegister[i])) << 1;

        if (temperatureHalfBit[i] > 0) {

          value |= ((ReadByte(temperatureHalfRegister[i]) >>

            temperatureHalfBit[i]) & 0x1);

        }

        byte source = ReadByte(temperatureSourceRegister[i]);

        temperatureSourceMask |= 1 << source;

        float? temperature = 0.5f * value;

        if (temperature > 125 || temperature < -55)

          temperature = null;

        for (int j = 0; j < temperatures.Length; j++) 

          if (temperaturesSource[j] == source)

            temperatures[j] = temperature; 

      }

      for (int i = 0; i < alternateTemperatureRegister.Length; i++) {

        if (!alternateTemperatureRegister[i].HasValue)

          continue;

        if ((temperatureSourceMask & (1 << temperaturesSource[i])) > 0)

          continue;

        float? temperature = (sbyte)

          ReadByte(alternateTemperatureRegister[i].Value);

        if (temperature > 125 || temperature < -55)

          temperature = null;

        temperatures[i] = temperature;

      }

      for (int i = 0; i < fans.Length; i++) {

        byte high = ReadByte((ushort)(fanRpmBaseRegister + (i << 1)));

        byte low = ReadByte((ushort)(fanRpmBaseRegister + (i << 1) + 1));

        int value = (high << 8) | low;

        fans[i] = value > minFanRPM ? value : 0;

      }

      for (int i = 0; i < controls.Length; i++) {

        int value = ReadByte(FAN_PWM_OUT_REG[i]);

        controls[i] = value / 2.55f;

      }

      Ring0.ReleaseIsaBusMutex();

    }

    public string GetReport() {

      StringBuilder r = new StringBuilder();

      r.AppendLine("LPC " + this.GetType().Name);

      r.AppendLine();

      r.Append("Chip ID: 0x"); r.AppendLine(chip.ToString("X"));

      r.Append("Chip revision: 0x");

      r.AppendLine(revision.ToString("X", CultureInfo.InvariantCulture));

      r.Append("Base Adress: 0x");

      r.AppendLine(port.ToString("X4", CultureInfo.InvariantCulture));

      r.AppendLine();

      if (!Ring0.WaitIsaBusMutex(100))

        return r.ToString();

      ushort[] addresses = new ushort[] { 

        0x000, 0x010, 0x020, 0x030, 0x040, 0x050, 0x060, 0x070,

        0x100, 0x110, 0x120, 0x130, 0x140, 0x150, 

        0x200,        0x220, 0x230, 0x240, 0x250,

        0x300,        0x320, 0x330, 0x340, 

        0x400, 0x410, 0x420,        0x440, 0x450, 0x460, 0x480, 0x490, 0x4C0,

        0x500,                             0x550, 

        0x600, 0x610 ,0x620, 0x630, 0x640, 0x650, 0x660, 0x670, 

        0x800,

        0x900,

        0xA00, 0xA10, 0xA20, 0xA30,        0xA50, 0xA60, 0xA70, 

        0xB00, 0xB10, 0xB20, 0xB30,        0xB50, 0xB60, 0xB70, 

        0xC00, 0xC10, 0xC20, 0xC30,        0xC50, 0xC60, 0xC70,

        0xD00, 0xD10, 0xD20, 0xD30,        0xD50, 0xD60, 

        0xE00, 0xE10, 0xE20, 0xE30, 

        0xF00, 0xF10, 0xF20, 0xF30};

      r.AppendLine("Hardware Monitor Registers");

      r.AppendLine();

      r.AppendLine("       00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F");

      r.AppendLine();

      foreach (ushort address in addresses) {

          r.Append(" ");

          r.Append(address.ToString("X3", CultureInfo.InvariantCulture));

          r.Append("  ");

          for (ushort j = 0; j <= 0xF; j++) {

            r.Append(" ");

            r.Append(ReadByte((ushort)(address | j)).ToString(

              "X2", CultureInfo.InvariantCulture));

          }

          r.AppendLine();

      }

      r.AppendLine();

      Ring0.ReleaseIsaBusMutex();

      return r.ToString();

    }

  }

}