OpenHardwareMonitor-retired: Hardware/Mainboard/SuperIOHardware.cs@81ab5e53122e (annotated)

moel@135	1	/*
moel@130	2
moel@130	3	Version: MPL 1.1/GPL 2.0/LGPL 2.1
moel@130	4
moel@130	5	The contents of this file are subject to the Mozilla Public License Version
moel@130	6	1.1 (the "License"); you may not use this file except in compliance with
moel@130	7	the License. You may obtain a copy of the License at
moel@130	8
moel@130	9	http://www.mozilla.org/MPL/
moel@130	10
moel@130	11	Software distributed under the License is distributed on an "AS IS" basis,
moel@130	12	WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
moel@130	13	for the specific language governing rights and limitations under the License.
moel@130	14
moel@130	15	The Original Code is the Open Hardware Monitor code.
moel@130	16
moel@130	17	The Initial Developer of the Original Code is
moel@130	18	Michael Möller <m.moeller@gmx.ch>.
moel@130	19	Portions created by the Initial Developer are Copyright (C) 2009-2010
moel@130	20	the Initial Developer. All Rights Reserved.
moel@130	21
moel@130	22	Contributor(s):
moel@130	23
moel@130	24	Alternatively, the contents of this file may be used under the terms of
moel@130	25	either the GNU General Public License Version 2 or later (the "GPL"), or
moel@130	26	the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
moel@130	27	in which case the provisions of the GPL or the LGPL are applicable instead
moel@130	28	of those above. If you wish to allow use of your version of this file only
moel@130	29	under the terms of either the GPL or the LGPL, and not to allow others to
moel@130	30	use your version of this file under the terms of the MPL, indicate your
moel@130	31	decision by deleting the provisions above and replace them with the notice
moel@130	32	and other provisions required by the GPL or the LGPL. If you do not delete
moel@130	33	the provisions above, a recipient may use your version of this file under
moel@130	34	the terms of any one of the MPL, the GPL or the LGPL.
moel@130	35
moel@130	36	*/
moel@130	37
moel@130	38	using System;
moel@130	39	using System.Collections.Generic;
moel@166	40	using System.Globalization;
moel@130	41	using OpenHardwareMonitor.Hardware.LPC;
moel@130	42
moel@130	43	namespace OpenHardwareMonitor.Hardware.Mainboard {
moel@165	44	internal class SuperIOHardware : Hardware {
moel@130	45
moel@130	46	private ISuperIO superIO;
moel@167	47	private string name;
moel@130	48
moel@130	49	private List<Sensor> voltages = new List<Sensor>();
moel@130	50	private List<Sensor> temperatures = new List<Sensor>();
moel@167	51	private List<Sensor> fans = new List<Sensor>();
moel@167	52
moel@130	53
moel@165	54	public SuperIOHardware(ISuperIO superIO, Manufacturer manufacturer,
moel@165	55	Model model, ISettings settings)
moel@130	56	{
moel@130	57	this.superIO = superIO;
moel@167	58	this.name = ChipName.GetName(superIO.Chip);
moel@130	59
moel@130	60	List<Voltage> v = new List<Voltage>();
moel@130	61	List<Temperature> t = new List<Temperature>();
moel@130	62	List<Fan> f = new List<Fan>();
moel@130	63
moel@130	64	switch (superIO.Chip) {
moel@130	65	case Chip.IT8712F:
moel@130	66	case Chip.IT8716F:
moel@130	67	case Chip.IT8718F:
moel@170	68	case Chip.IT8720F:
moel@130	69	case Chip.IT8726F:
moel@130	70	switch (manufacturer) {
moel@133	71	case Manufacturer.ASUS:
moel@133	72	switch (model) {
moel@168	73	case Model.Crosshair_III_Formula: // IT8720F
moel@133	74	v.Add(new Voltage("VBat", 8));
moel@133	75	t.Add(new Temperature("CPU", 0));
moel@133	76	for (int i = 0; i < superIO.Fans.Length; i++)
moel@133	77	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	78	break;
moel@144	79	case Model.M2N_SLI_DELUXE:
moel@133	80	v.Add(new Voltage("CPU VCore", 0));
moel@133	81	v.Add(new Voltage("+3.3V", 1));
moel@133	82	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@133	83	v.Add(new Voltage("+12V", 4, 30, 10, 0));
moel@133	84	v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0));
moel@133	85	v.Add(new Voltage("VBat", 8));
moel@133	86	t.Add(new Temperature("CPU", 0));
moel@133	87	t.Add(new Temperature("Motherboard", 1));
moel@133	88	f.Add(new Fan("CPU Fan", 0));
moel@133	89	f.Add(new Fan("Chassis Fan #1", 1));
moel@133	90	f.Add(new Fan("Power Fan", 2));
moel@133	91	break;
moel@168	92	case Model.M4A79XTD_EVO: // IT8720F
moel@144	93	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@144	94	v.Add(new Voltage("VBat", 8));
moel@144	95	t.Add(new Temperature("CPU", 0));
moel@144	96	t.Add(new Temperature("Motherboard", 1));
moel@144	97	f.Add(new Fan("CPU Fan", 0));
moel@144	98	f.Add(new Fan("Chassis Fan #1", 1));
moel@144	99	f.Add(new Fan("Chassis Fan #2", 2));
moel@144	100	break;
moel@133	101	default:
moel@133	102	v.Add(new Voltage("CPU VCore", 0));
moel@133	103	v.Add(new Voltage("Voltage #2", 1, true));
moel@133	104	v.Add(new Voltage("Voltage #3", 2, true));
moel@133	105	v.Add(new Voltage("Voltage #4", 3, true));
moel@133	106	v.Add(new Voltage("Voltage #5", 4, true));
moel@133	107	v.Add(new Voltage("Voltage #6", 5, true));
moel@133	108	v.Add(new Voltage("Voltage #7", 6, true));
moel@133	109	v.Add(new Voltage("Voltage #8", 7, true));
moel@133	110	v.Add(new Voltage("VBat", 8));
moel@133	111	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@133	112	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@133	113	for (int i = 0; i < superIO.Fans.Length; i++)
moel@133	114	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	115	break;
moel@133	116	}
moel@133	117	break;
moel@130	118	case Manufacturer.DFI:
moel@130	119	switch (model) {
moel@168	120	case Model.LP_BI_P45_T2RS_Elite: // IT8718F
moel@130	121	v.Add(new Voltage("CPU VCore", 0));
moel@130	122	v.Add(new Voltage("FSB VTT", 1));
moel@130	123	v.Add(new Voltage("+3.3V", 2));
moel@130	124	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@130	125	v.Add(new Voltage("+12V", 4, 30, 10, 0));
moel@130	126	v.Add(new Voltage("NB Core", 5));
moel@130	127	v.Add(new Voltage("VDIMM", 6));
moel@130	128	v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0));
moel@130	129	v.Add(new Voltage("VBat", 8));
moel@130	130	t.Add(new Temperature("CPU", 0));
moel@130	131	t.Add(new Temperature("System", 1));
moel@130	132	t.Add(new Temperature("Chipset", 2));
moel@130	133	f.Add(new Fan("Fan #1", 0));
moel@130	134	f.Add(new Fan("Fan #2", 1));
moel@130	135	f.Add(new Fan("Fan #3", 2));
moel@130	136	break;
moel@168	137	case Model.LP_DK_P55_T3eH9: // IT8720F
moel@130	138	v.Add(new Voltage("CPU VCore", 0));
moel@130	139	v.Add(new Voltage("VTT", 1));
moel@130	140	v.Add(new Voltage("+3.3V", 2));
moel@130	141	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@130	142	v.Add(new Voltage("+12V", 4, 30, 10, 0));
moel@130	143	v.Add(new Voltage("CPU PLL", 5));
moel@130	144	v.Add(new Voltage("DRAM", 6));
moel@130	145	v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0));
moel@130	146	v.Add(new Voltage("VBat", 8));
moel@130	147	t.Add(new Temperature("Chipset", 0));
moel@130	148	t.Add(new Temperature("CPU PWM", 1));
moel@130	149	t.Add(new Temperature("CPU", 2));
moel@130	150	f.Add(new Fan("Fan #1", 0));
moel@130	151	f.Add(new Fan("Fan #2", 1));
moel@130	152	f.Add(new Fan("Fan #3", 2));
moel@130	153	break;
moel@130	154	default:
moel@130	155	v.Add(new Voltage("CPU VCore", 0));
moel@130	156	v.Add(new Voltage("VTT", 1, true));
moel@130	157	v.Add(new Voltage("+3.3V", 2, true));
moel@130	158	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130	159	v.Add(new Voltage("+12V", 4, 30, 10, 0, true));
moel@130	160	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	161	v.Add(new Voltage("DRAM", 6, true));
moel@130	162	v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));
moel@130	163	v.Add(new Voltage("VBat", 8));
moel@130	164	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	165	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	166	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	167	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	168	break;
moel@130	169	}
moel@130	170	break;
moel@130	171
moel@130	172	case Manufacturer.Gigabyte:
moel@130	173	switch (model) {
moel@168	174	case Model._965P_S3: // IT8718F
moel@130	175	v.Add(new Voltage("CPU VCore", 0));
moel@130	176	v.Add(new Voltage("DRAM", 1));
moel@130	177	v.Add(new Voltage("+3.3V", 2));
moel@130	178	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@130	179	v.Add(new Voltage("+12V", 7, 27, 9.1f, 0));
moel@130	180	v.Add(new Voltage("VBat", 8));
moel@130	181	t.Add(new Temperature("System", 0));
moel@130	182	t.Add(new Temperature("CPU", 1));
moel@130	183	f.Add(new Fan("CPU Fan", 0));
moel@130	184	f.Add(new Fan("System Fan", 1));
moel@130	185	break;
moel@168	186	case Model.EP45_DS3R: // IT8718F
moel@130	187	case Model.EP45_UD3R:
moel@138	188	case Model.X38_DS5:
moel@130	189	v.Add(new Voltage("CPU VCore", 0));
moel@130	190	v.Add(new Voltage("DRAM", 1));
moel@130	191	v.Add(new Voltage("+3.3V", 2));
moel@130	192	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@130	193	v.Add(new Voltage("+12V", 7, 27, 9.1f, 0));
moel@130	194	v.Add(new Voltage("VBat", 8));
moel@130	195	t.Add(new Temperature("System", 0));
moel@130	196	t.Add(new Temperature("CPU", 1));
moel@130	197	f.Add(new Fan("CPU Fan", 0));
moel@130	198	f.Add(new Fan("System Fan #2", 1));
moel@130	199	f.Add(new Fan("Power Fan", 2));
moel@130	200	f.Add(new Fan("System Fan #1", 3));
moel@130	201	break;
moel@168	202	case Model.EX58_EXTREME: // IT8720F
moel@133	203	v.Add(new Voltage("CPU VCore", 0));
moel@133	204	v.Add(new Voltage("DRAM", 1));
moel@133	205	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@133	206	v.Add(new Voltage("VBat", 8));
moel@133	207	t.Add(new Temperature("System", 0));
moel@133	208	t.Add(new Temperature("CPU", 1));
moel@138	209	t.Add(new Temperature("Northbridge", 2));
moel@133	210	f.Add(new Fan("CPU Fan", 0));
moel@133	211	f.Add(new Fan("System Fan #2", 1));
moel@133	212	f.Add(new Fan("Power Fan", 2));
moel@133	213	f.Add(new Fan("System Fan #1", 3));
moel@133	214	break;
moel@168	215	case Model.P35_DS3: // IT8718F
moel@168	216	case Model.P35_DS3L: // IT8718F
moel@130	217	v.Add(new Voltage("CPU VCore", 0));
moel@130	218	v.Add(new Voltage("DRAM", 1));
moel@130	219	v.Add(new Voltage("+3.3V", 2));
moel@130	220	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@130	221	v.Add(new Voltage("+12V", 7, 27, 9.1f, 0));
moel@130	222	v.Add(new Voltage("VBat", 8));
moel@130	223	t.Add(new Temperature("System", 0));
moel@130	224	t.Add(new Temperature("CPU", 1));
moel@130	225	f.Add(new Fan("CPU Fan", 0));
moel@130	226	f.Add(new Fan("System Fan #1", 1));
moel@130	227	f.Add(new Fan("System Fan #2", 2));
moel@130	228	f.Add(new Fan("Power Fan", 3));
moel@130	229	break;
moel@168	230	case Model.P55_UD4: // IT8720F
moel@168	231	case Model.P55M_UD4: // IT8720F
moel@148	232	v.Add(new Voltage("CPU VCore", 0));
moel@148	233	v.Add(new Voltage("DRAM", 1));
moel@148	234	v.Add(new Voltage("+3.3V", 2));
moel@148	235	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@148	236	v.Add(new Voltage("+12V", 5, 27, 9.1f, 0));
moel@148	237	v.Add(new Voltage("VBat", 8));
moel@148	238	t.Add(new Temperature("System", 0));
moel@148	239	t.Add(new Temperature("CPU", 2));
moel@148	240	f.Add(new Fan("CPU Fan", 0));
moel@148	241	f.Add(new Fan("System Fan #2", 1));
moel@148	242	f.Add(new Fan("Power Fan", 2));
moel@148	243	f.Add(new Fan("System Fan #1", 3));
moel@148	244	break;
moel@168	245	case Model.GA_MA770T_UD3: // IT8720F
moel@154	246	v.Add(new Voltage("CPU VCore", 0));
moel@154	247	v.Add(new Voltage("DRAM", 1));
moel@154	248	v.Add(new Voltage("+3.3V", 2));
moel@154	249	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@154	250	v.Add(new Voltage("+12V", 4, 27, 9.1f, 0));
moel@154	251	v.Add(new Voltage("VBat", 8));
moel@154	252	t.Add(new Temperature("System", 0));
moel@154	253	t.Add(new Temperature("CPU", 1));
moel@154	254	f.Add(new Fan("CPU Fan", 0));
moel@154	255	f.Add(new Fan("System Fan #1", 1));
moel@154	256	f.Add(new Fan("System Fan #2", 2));
moel@154	257	f.Add(new Fan("Power Fan", 3));
moel@154	258	break;
moel@168	259	case Model.GA_MA785GMT_UD2H: // IT8718F
moel@130	260	v.Add(new Voltage("CPU VCore", 0));
moel@130	261	v.Add(new Voltage("DRAM", 1));
moel@130	262	v.Add(new Voltage("+3.3V", 2));
moel@130	263	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@130	264	v.Add(new Voltage("+12V", 4, 27, 9.1f, 0));
moel@130	265	v.Add(new Voltage("VBat", 8));
moel@130	266	t.Add(new Temperature("System", 0));
moel@130	267	t.Add(new Temperature("CPU", 1));
moel@130	268	f.Add(new Fan("CPU Fan", 0));
moel@130	269	f.Add(new Fan("System Fan", 1));
moel@130	270	f.Add(new Fan("NB Fan", 2));
moel@130	271	break;
moel@168	272	case Model.X58A_UD3R: // IT8720F
moel@138	273	v.Add(new Voltage("CPU VCore", 0));
moel@138	274	v.Add(new Voltage("DRAM", 1));
moel@138	275	v.Add(new Voltage("+3.3V", 2));
moel@138	276	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@138	277	v.Add(new Voltage("+12V", 5, 27, 9.1f, 0));
moel@138	278	v.Add(new Voltage("VBat", 8));
moel@138	279	t.Add(new Temperature("System", 0));
moel@138	280	t.Add(new Temperature("CPU", 1));
moel@138	281	t.Add(new Temperature("Northbridge", 2));
moel@138	282	f.Add(new Fan("CPU Fan", 0));
moel@138	283	f.Add(new Fan("System Fan #2", 1));
moel@138	284	f.Add(new Fan("Power Fan", 2));
moel@138	285	f.Add(new Fan("System Fan #1", 3));
moel@138	286	break;
moel@130	287	default:
moel@130	288	v.Add(new Voltage("CPU VCore", 0));
moel@130	289	v.Add(new Voltage("DRAM", 1, true));
moel@130	290	v.Add(new Voltage("+3.3V", 2, true));
moel@130	291	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130	292	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	293	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	294	v.Add(new Voltage("Voltage #7", 6, true));
moel@130	295	v.Add(new Voltage("+12V", 7, 27, 9.1f, 0, true));
moel@130	296	v.Add(new Voltage("VBat", 8));
moel@130	297	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	298	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	299	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	300	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	301	break;
moel@130	302	}
moel@130	303	break;
moel@130	304
moel@130	305	default:
moel@130	306	v.Add(new Voltage("CPU VCore", 0));
moel@130	307	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	308	v.Add(new Voltage("Voltage #3", 2, true));
moel@130	309	v.Add(new Voltage("Voltage #4", 3, true));
moel@130	310	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	311	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	312	v.Add(new Voltage("Voltage #7", 6, true));
moel@130	313	v.Add(new Voltage("Voltage #8", 7, true));
moel@130	314	v.Add(new Voltage("VBat", 8));
moel@130	315	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	316	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	317	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	318	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	319	break;
moel@130	320	}
moel@130	321	break;
moel@170	322
moel@170	323	case Chip.IT8721F:
moel@170	324	v.Add(new Voltage("Voltage #1", 0, true));
moel@170	325	v.Add(new Voltage("Voltage #2", 1, true));
moel@170	326	v.Add(new Voltage("Voltage #3", 2, true));
moel@170	327	v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));
moel@170	328	v.Add(new Voltage("Voltage #5", 4, true));
moel@170	329	v.Add(new Voltage("Voltage #6", 5, true));
moel@170	330	v.Add(new Voltage("Voltage #7", 6, true));
moel@170	331	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@170	332	v.Add(new Voltage("VBat", 8, 10, 10, 0));
moel@170	333	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@170	334	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@170	335	for (int i = 0; i < superIO.Fans.Length; i++)
moel@170	336	f.Add(new Fan("Fan #" + (i + 1), i));
moel@170	337	break;
moel@130	338
moel@130	339	case Chip.F71858:
moel@132	340	v.Add(new Voltage("VCC3V", 0, 150, 150, 0));
moel@132	341	v.Add(new Voltage("VSB3V", 1, 150, 150, 0));
moel@132	342	v.Add(new Voltage("Battery", 2, 150, 150, 0));
moel@130	343	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	344	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	345	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	346	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	347	break;
moel@130	348	case Chip.F71862:
moel@130	349	case Chip.F71869:
moel@130	350	case Chip.F71882:
moel@130	351	case Chip.F71889ED:
moel@130	352	case Chip.F71889F:
moel@132	353	switch (manufacturer) {
moel@132	354	case Manufacturer.EVGA:
moel@132	355	switch (model) {
moel@168	356	case Model.X58_SLI_Classified: // F71882
moel@132	357	v.Add(new Voltage("VCC3V", 0, 150, 150, 0));
moel@132	358	v.Add(new Voltage("CPU VCore", 1, 47, 100, 0));
moel@132	359	v.Add(new Voltage("DIMM", 2, 47, 100, 0));
moel@132	360	v.Add(new Voltage("CPU VTT", 3, 24, 100, 0));
moel@132	361	v.Add(new Voltage("IOH Vcore", 4, 24, 100, 0));
moel@132	362	v.Add(new Voltage("+5V", 5, 51, 12, 0));
moel@132	363	v.Add(new Voltage("+12V", 6, 56, 6.8f, 0));
moel@132	364	v.Add(new Voltage("3VSB", 7, 150, 150, 0));
moel@132	365	v.Add(new Voltage("VBat", 8, 150, 150, 0));
moel@132	366	t.Add(new Temperature("CPU", 0));
moel@132	367	t.Add(new Temperature("VREG", 1));
moel@132	368	t.Add(new Temperature("System", 2));
moel@132	369	f.Add(new Fan("CPU Fan", 0));
moel@132	370	f.Add(new Fan("Power Fan", 1));
moel@132	371	f.Add(new Fan("Chassis Fan", 2));
moel@132	372	break;
moel@132	373	default:
moel@132	374	v.Add(new Voltage("VCC3V", 0, 150, 150, 0));
moel@132	375	v.Add(new Voltage("CPU VCore", 1));
moel@132	376	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	377	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	378	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	379	v.Add(new Voltage("Voltage #6", 5, true));
moel@132	380	v.Add(new Voltage("Voltage #7", 6, true));
moel@132	381	v.Add(new Voltage("VSB3V", 7, 150, 150, 0));
moel@132	382	v.Add(new Voltage("VBat", 8, 150, 150, 0));
moel@132	383	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	384	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	385	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	386	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	387	break;
moel@132	388	}
moel@132	389	break;
moel@132	390	default:
moel@132	391	v.Add(new Voltage("VCC3V", 0, 150, 150, 0));
moel@132	392	v.Add(new Voltage("CPU VCore", 1));
moel@132	393	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	394	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	395	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	396	v.Add(new Voltage("Voltage #6", 5, true));
moel@132	397	v.Add(new Voltage("Voltage #7", 6, true));
moel@132	398	v.Add(new Voltage("VSB3V", 7, 150, 150, 0));
moel@132	399	v.Add(new Voltage("VBat", 8, 150, 150, 0));
moel@132	400	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	401	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	402	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	403	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	404	break;
moel@132	405	}
moel@130	406	break;
moel@130	407
moel@130	408	case Chip.W83627EHF:
moel@130	409	v.Add(new Voltage("CPU VCore", 0));
moel@130	410	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	411	v.Add(new Voltage("AVCC", 2, 34, 34, 0));
moel@130	412	v.Add(new Voltage("3VCC", 3, 34, 34, 0));
moel@130	413	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	414	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	415	v.Add(new Voltage("Voltage #7", 6, true));
moel@130	416	v.Add(new Voltage("3VSB", 7, 34, 34, 0));
moel@130	417	v.Add(new Voltage("VBAT", 8, 34, 34, 0));
moel@130	418	v.Add(new Voltage("Voltage #10", 9, true));
moel@130	419	t.Add(new Temperature("CPU", 0));
moel@130	420	t.Add(new Temperature("Auxiliary", 1));
moel@130	421	t.Add(new Temperature("System", 2));
moel@153	422	f.Add(new Fan("System Fan", 0));
moel@153	423	f.Add(new Fan("CPU Fan", 1));
moel@153	424	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	425	f.Add(new Fan("CPU Fan #2", 3));
moel@153	426	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@130	427	break;
moel@130	428	case Chip.W83627DHG:
moel@130	429	case Chip.W83627DHGP:
moel@130	430	case Chip.W83667HG:
moel@130	431	case Chip.W83667HGB:
moel@152	432	switch (manufacturer) {
moel@153	433	case Manufacturer.ASRock:
moel@153	434	switch (model) {
moel@168	435	case Model._880GMH_USB3: // W83627DHG-P
moel@153	436	v.Add(new Voltage("CPU VCore", 0));
moel@153	437	v.Add(new Voltage("+3.3V", 3, 34, 34, 0));
moel@153	438	v.Add(new Voltage("+5V", 5, 15, 7.5f, 0));
moel@153	439	v.Add(new Voltage("+12V", 6, 56, 10, 0));
moel@153	440	v.Add(new Voltage("Standby +3.3V", 7, 34, 34, 0));
moel@153	441	v.Add(new Voltage("VBAT", 8, 34, 34, 0));
moel@153	442	t.Add(new Temperature("CPU", 0));
moel@153	443	t.Add(new Temperature("Motherboard", 2));
moel@153	444	f.Add(new Fan("Chassis Fan", 0));
moel@153	445	f.Add(new Fan("CPU Fan", 1));
moel@153	446	f.Add(new Fan("Power Fan", 2));
moel@153	447	break;
moel@153	448	default:
moel@153	449	v.Add(new Voltage("CPU VCore", 0));
moel@153	450	v.Add(new Voltage("Voltage #2", 1, true));
moel@153	451	v.Add(new Voltage("AVCC", 2, 34, 34, 0));
moel@153	452	v.Add(new Voltage("3VCC", 3, 34, 34, 0));
moel@153	453	v.Add(new Voltage("Voltage #5", 4, true));
moel@153	454	v.Add(new Voltage("Voltage #6", 5, true));
moel@153	455	v.Add(new Voltage("Voltage #7", 6, true));
moel@153	456	v.Add(new Voltage("3VSB", 7, 34, 34, 0));
moel@153	457	v.Add(new Voltage("VBAT", 8, 34, 34, 0));
moel@153	458	t.Add(new Temperature("CPU", 0));
moel@153	459	t.Add(new Temperature("Auxiliary", 1));
moel@153	460	t.Add(new Temperature("System", 2));
moel@153	461	f.Add(new Fan("System Fan", 0));
moel@153	462	f.Add(new Fan("CPU Fan", 1));
moel@153	463	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	464	f.Add(new Fan("CPU Fan #2", 3));
moel@153	465	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@153	466	break;
moel@153	467	}
moel@153	468	break;
moel@152	469	case Manufacturer.ASUS:
moel@152	470	switch (model) {
moel@168	471	case Model.P6X58D_E: // W83667HG
moel@152	472	v.Add(new Voltage("CPU VCore", 0));
moel@152	473	v.Add(new Voltage("+12V", 1, 11.5f, 1.91f, 0));
moel@152	474	v.Add(new Voltage("Analog +3.3V", 2, 34, 34, 0));
moel@152	475	v.Add(new Voltage("+3.3V", 3, 34, 34, 0));
moel@153	476	v.Add(new Voltage("+5V", 4, 15, 7.5f, 0));
moel@152	477	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	478	v.Add(new Voltage("Voltage #7", 6, true));
moel@152	479	v.Add(new Voltage("Standby +3.3V", 7, 34, 34, 0));
moel@152	480	v.Add(new Voltage("VBAT", 8, 34, 34, 0));
moel@152	481	t.Add(new Temperature("CPU", 0));
moel@152	482	t.Add(new Temperature("Motherboard", 2));
moel@152	483	f.Add(new Fan("Chassis Fan #1", 0));
moel@153	484	f.Add(new Fan("CPU Fan", 1));
moel@153	485	f.Add(new Fan("Power Fan", 2));
moel@152	486	f.Add(new Fan("Chassis Fan #2", 3));
moel@152	487	f.Add(new Fan("Chassis Fan #3", 4));
moel@152	488	break;
moel@152	489	default:
moel@152	490	v.Add(new Voltage("CPU VCore", 0));
moel@152	491	v.Add(new Voltage("Voltage #2", 1, true));
moel@152	492	v.Add(new Voltage("AVCC", 2, 34, 34, 0));
moel@152	493	v.Add(new Voltage("3VCC", 3, 34, 34, 0));
moel@152	494	v.Add(new Voltage("Voltage #5", 4, true));
moel@152	495	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	496	v.Add(new Voltage("Voltage #7", 6, true));
moel@152	497	v.Add(new Voltage("3VSB", 7, 34, 34, 0));
moel@152	498	v.Add(new Voltage("VBAT", 8, 34, 34, 0));
moel@152	499	t.Add(new Temperature("CPU", 0));
moel@152	500	t.Add(new Temperature("Auxiliary", 1));
moel@152	501	t.Add(new Temperature("System", 2));
moel@153	502	f.Add(new Fan("System Fan", 0));
moel@153	503	f.Add(new Fan("CPU Fan", 1));
moel@153	504	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	505	f.Add(new Fan("CPU Fan #2", 3));
moel@153	506	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152	507	break;
moel@152	508	}
moel@152	509	break;
moel@152	510	default:
moel@152	511	v.Add(new Voltage("CPU VCore", 0));
moel@152	512	v.Add(new Voltage("Voltage #2", 1, true));
moel@152	513	v.Add(new Voltage("AVCC", 2, 34, 34, 0));
moel@152	514	v.Add(new Voltage("3VCC", 3, 34, 34, 0));
moel@152	515	v.Add(new Voltage("Voltage #5", 4, true));
moel@152	516	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	517	v.Add(new Voltage("Voltage #7", 6, true));
moel@152	518	v.Add(new Voltage("3VSB", 7, 34, 34, 0));
moel@152	519	v.Add(new Voltage("VBAT", 8, 34, 34, 0));
moel@152	520	t.Add(new Temperature("CPU", 0));
moel@152	521	t.Add(new Temperature("Auxiliary", 1));
moel@152	522	t.Add(new Temperature("System", 2));
moel@153	523	f.Add(new Fan("System Fan", 0));
moel@153	524	f.Add(new Fan("CPU Fan", 1));
moel@153	525	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	526	f.Add(new Fan("CPU Fan #2", 3));
moel@153	527	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152	528	break;
moel@152	529	}
moel@130	530	break;
moel@130	531	case Chip.W83627HF:
moel@130	532	case Chip.W83627THF:
moel@130	533	case Chip.W83687THF:
moel@130	534	v.Add(new Voltage("CPU VCore", 0));
moel@130	535	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	536	v.Add(new Voltage("Voltage #3", 2, true));
moel@130	537	v.Add(new Voltage("AVCC", 3, 34, 51, 0));
moel@130	538	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	539	v.Add(new Voltage("5VSB", 5, 34, 51, 0));
moel@130	540	v.Add(new Voltage("VBAT", 6));
moel@130	541	t.Add(new Temperature("CPU", 0));
moel@130	542	t.Add(new Temperature("Auxiliary", 1));
moel@130	543	t.Add(new Temperature("System", 2));
moel@153	544	f.Add(new Fan("System Fan", 0));
moel@153	545	f.Add(new Fan("CPU Fan", 1));
moel@153	546	f.Add(new Fan("Auxiliary Fan", 2));
moel@130	547	break;
moel@130	548	default:
moel@130	549	for (int i = 0; i < superIO.Voltages.Length; i++)
moel@130	550	v.Add(new Voltage("Voltage #" + (i + 1), i, true));
moel@130	551	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	552	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	553	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	554	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	555	break;
moel@130	556	}
moel@130	557
moel@130	558	string formula = "Voltage = value + (value - Vf) * Ri / Rf.";
moel@130	559	foreach (Voltage voltage in v)
moel@130	560	if (voltage.Index < superIO.Voltages.Length) {
moel@130	561	Sensor sensor = new Sensor(voltage.Name, voltage.Index,
moel@134	562	voltage.Hidden, SensorType.Voltage, this,
moel@130	563	new ParameterDescription[] {
moel@130	564	new ParameterDescription("Ri [kΩ]", "Input resistance.\n" +
moel@130	565	formula, voltage.Ri),
moel@130	566	new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" +
moel@130	567	formula, voltage.Rf),
moel@130	568	new ParameterDescription("Vf [V]", "Reference voltage.\n" +
moel@130	569	formula, voltage.Vf)
moel@165	570	}, settings);
moel@130	571	voltages.Add(sensor);
moel@130	572	}
moel@130	573
moel@130	574	foreach (Temperature temperature in t)
moel@130	575	if (temperature.Index < superIO.Temperatures.Length) {
moel@134	576	Sensor sensor = new Sensor(temperature.Name, temperature.Index,
moel@130	577	SensorType.Temperature, this, new ParameterDescription[] {
moel@130	578	new ParameterDescription("Offset [°C]", "Temperature offset.", 0)
moel@165	579	}, settings);
moel@130	580	temperatures.Add(sensor);
moel@130	581	}
moel@130	582
moel@130	583	foreach (Fan fan in f)
moel@130	584	if (fan.Index < superIO.Fans.Length) {
moel@134	585	Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,
moel@165	586	this, settings);
moel@130	587	fans.Add(sensor);
moel@130	588	}
moel@130	589	}
moel@130	590
moel@130	591	public override Identifier Identifier {
moel@166	592	get {
moel@166	593	return new Identifier("lpc",
moel@166	594	superIO.Chip.ToString().ToLower(CultureInfo.InvariantCulture));
moel@166	595	}
moel@130	596	}
moel@130	597
moel@165	598	public override HardwareType HardwareType {
moel@165	599	get { return HardwareType.SuperIO; }
moel@130	600	}
moel@130	601
moel@130	602	public override string Name {
moel@130	603	get { return name; }
moel@130	604	}
moel@130	605
moel@130	606	public override string GetReport() {
moel@130	607	return superIO.GetReport();
moel@130	608	}
moel@130	609
moel@130	610	public override void Update() {
moel@130	611	superIO.Update();
moel@130	612
moel@130	613	foreach (Sensor sensor in voltages) {
moel@130	614	float? value = superIO.Voltages[sensor.Index];
moel@130	615	if (value.HasValue) {
moel@130	616	sensor.Value = value + (value - sensor.Parameters[2].Value) *
moel@130	617	sensor.Parameters[0].Value / sensor.Parameters[1].Value;
moel@130	618	ActivateSensor(sensor);
moel@130	619	}
moel@130	620	}
moel@130	621
moel@130	622	foreach (Sensor sensor in temperatures) {
moel@130	623	float? value = superIO.Temperatures[sensor.Index];
moel@130	624	if (value.HasValue) {
moel@130	625	sensor.Value = value + sensor.Parameters[0].Value;
moel@130	626	ActivateSensor(sensor);
moel@130	627	}
moel@130	628	}
moel@130	629
moel@130	630	foreach (Sensor sensor in fans) {
moel@130	631	float? value = superIO.Fans[sensor.Index];
moel@130	632	if (value.HasValue) {
moel@130	633	sensor.Value = value;
moel@130	634	if (value.Value > 0)
moel@130	635	ActivateSensor(sensor);
moel@130	636	}
moel@130	637	}
moel@130	638	}
moel@130	639
moel@130	640	private class Voltage {
moel@130	641	public readonly string Name;
moel@130	642	public readonly int Index;
moel@130	643	public readonly float Ri;
moel@130	644	public readonly float Rf;
moel@130	645	public readonly float Vf;
moel@130	646	public readonly bool Hidden;
moel@130	647
moel@130	648	public Voltage(string name, int index) :
moel@130	649	this(name, index, 0, 1, 0, false) { }
moel@130	650
moel@130	651	public Voltage(string name, int index, bool hidden) :
moel@130	652	this(name, index, 0, 1, 0, hidden) { }
moel@130	653
moel@130	654	public Voltage(string name, int index, float ri, float rf, float vf) :
moel@130	655	this(name, index, ri, rf, vf, false) { }
moel@130	656
moel@130	657	public Voltage(string name, int index, float ri, float rf, float vf,
moel@130	658	bool hidden) {
moel@130	659	this.Name = name;
moel@130	660	this.Index = index;
moel@130	661	this.Ri = ri;
moel@130	662	this.Rf = rf;
moel@130	663	this.Vf = vf;
moel@130	664	this.Hidden = hidden;
moel@130	665	}
moel@130	666	}
moel@130	667
moel@130	668	private class Temperature {
moel@130	669	public readonly string Name;
moel@130	670	public readonly int Index;
moel@130	671
moel@167	672	public Temperature(string name, int index) {
moel@130	673	this.Name = name;
moel@130	674	this.Index = index;
moel@130	675	}
moel@130	676	}
moel@130	677
moel@130	678	private class Fan {
moel@130	679	public readonly string Name;
moel@130	680	public readonly int Index;
moel@130	681
moel@130	682	public Fan(string name, int index) {
moel@130	683	this.Name = name;
moel@130	684	this.Index = index;
moel@130	685	}
moel@130	686	}
moel@130	687	}
moel@130	688	}

author	moel.mich
	Sun, 22 Aug 2010 21:53:11 +0000
changeset 171	81ab5e53122e
parent 168	7f90baeb96b0
child 174	51d62ed28ff5
permissions	-rw-r--r--