OpenHardwareMonitor-retired: Hardware/Mainboard/SuperIOHardware.cs@4801e9eaf979 (annotated)

moel@135	1	/*
moel@130	2
moel@130	3	Version: MPL 1.1/GPL 2.0/LGPL 2.1
moel@130	4
moel@130	5	The contents of this file are subject to the Mozilla Public License Version
moel@130	6	1.1 (the "License"); you may not use this file except in compliance with
moel@130	7	the License. You may obtain a copy of the License at
moel@130	8
moel@130	9	http://www.mozilla.org/MPL/
moel@130	10
moel@130	11	Software distributed under the License is distributed on an "AS IS" basis,
moel@130	12	WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
moel@130	13	for the specific language governing rights and limitations under the License.
moel@130	14
moel@130	15	The Original Code is the Open Hardware Monitor code.
moel@130	16
moel@130	17	The Initial Developer of the Original Code is
moel@130	18	Michael Möller <m.moeller@gmx.ch>.
moel@130	19	Portions created by the Initial Developer are Copyright (C) 2009-2010
moel@130	20	the Initial Developer. All Rights Reserved.
moel@130	21
moel@130	22	Contributor(s):
moel@130	23
moel@130	24	Alternatively, the contents of this file may be used under the terms of
moel@130	25	either the GNU General Public License Version 2 or later (the "GPL"), or
moel@130	26	the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
moel@130	27	in which case the provisions of the GPL or the LGPL are applicable instead
moel@130	28	of those above. If you wish to allow use of your version of this file only
moel@130	29	under the terms of either the GPL or the LGPL, and not to allow others to
moel@130	30	use your version of this file under the terms of the MPL, indicate your
moel@130	31	decision by deleting the provisions above and replace them with the notice
moel@130	32	and other provisions required by the GPL or the LGPL. If you do not delete
moel@130	33	the provisions above, a recipient may use your version of this file under
moel@130	34	the terms of any one of the MPL, the GPL or the LGPL.
moel@130	35
moel@130	36	*/
moel@130	37
moel@130	38	using System.Collections.Generic;
moel@166	39	using System.Globalization;
moel@130	40	using OpenHardwareMonitor.Hardware.LPC;
moel@130	41
moel@130	42	namespace OpenHardwareMonitor.Hardware.Mainboard {
moel@165	43	internal class SuperIOHardware : Hardware {
moel@130	44
moel@176	45	private Mainboard mainboard;
moel@130	46	private ISuperIO superIO;
moel@167	47	private string name;
moel@130	48
moel@130	49	private List<Sensor> voltages = new List<Sensor>();
moel@130	50	private List<Sensor> temperatures = new List<Sensor>();
moel@167	51	private List<Sensor> fans = new List<Sensor>();
moel@167	52
moel@130	53
moel@176	54	public SuperIOHardware(Mainboard mainboard, ISuperIO superIO,
moel@176	55	Manufacturer manufacturer, Model model, ISettings settings)
moel@130	56	{
moel@176	57	this.mainboard = mainboard;
moel@130	58	this.superIO = superIO;
moel@167	59	this.name = ChipName.GetName(superIO.Chip);
moel@130	60
moel@130	61	List<Voltage> v = new List<Voltage>();
moel@130	62	List<Temperature> t = new List<Temperature>();
moel@130	63	List<Fan> f = new List<Fan>();
moel@130	64
moel@130	65	switch (superIO.Chip) {
moel@130	66	case Chip.IT8712F:
moel@130	67	case Chip.IT8716F:
moel@130	68	case Chip.IT8718F:
moel@177	69	case Chip.IT8720F:
moel@130	70	case Chip.IT8726F:
moel@130	71	switch (manufacturer) {
moel@133	72	case Manufacturer.ASUS:
moel@133	73	switch (model) {
moel@168	74	case Model.Crosshair_III_Formula: // IT8720F
moel@133	75	v.Add(new Voltage("VBat", 8));
moel@133	76	t.Add(new Temperature("CPU", 0));
moel@133	77	for (int i = 0; i < superIO.Fans.Length; i++)
moel@133	78	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	79	break;
moel@144	80	case Model.M2N_SLI_DELUXE:
moel@133	81	v.Add(new Voltage("CPU VCore", 0));
moel@133	82	v.Add(new Voltage("+3.3V", 1));
moel@133	83	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@133	84	v.Add(new Voltage("+12V", 4, 30, 10, 0));
moel@133	85	v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0));
moel@133	86	v.Add(new Voltage("VBat", 8));
moel@133	87	t.Add(new Temperature("CPU", 0));
moel@133	88	t.Add(new Temperature("Motherboard", 1));
moel@133	89	f.Add(new Fan("CPU Fan", 0));
moel@133	90	f.Add(new Fan("Chassis Fan #1", 1));
moel@133	91	f.Add(new Fan("Power Fan", 2));
moel@133	92	break;
moel@168	93	case Model.M4A79XTD_EVO: // IT8720F
moel@144	94	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@144	95	v.Add(new Voltage("VBat", 8));
moel@144	96	t.Add(new Temperature("CPU", 0));
moel@144	97	t.Add(new Temperature("Motherboard", 1));
moel@144	98	f.Add(new Fan("CPU Fan", 0));
moel@144	99	f.Add(new Fan("Chassis Fan #1", 1));
moel@144	100	f.Add(new Fan("Chassis Fan #2", 2));
moel@144	101	break;
moel@133	102	default:
moel@133	103	v.Add(new Voltage("CPU VCore", 0));
moel@133	104	v.Add(new Voltage("Voltage #2", 1, true));
moel@133	105	v.Add(new Voltage("Voltage #3", 2, true));
moel@133	106	v.Add(new Voltage("Voltage #4", 3, true));
moel@133	107	v.Add(new Voltage("Voltage #5", 4, true));
moel@133	108	v.Add(new Voltage("Voltage #6", 5, true));
moel@133	109	v.Add(new Voltage("Voltage #7", 6, true));
moel@133	110	v.Add(new Voltage("Voltage #8", 7, true));
moel@133	111	v.Add(new Voltage("VBat", 8));
moel@133	112	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@133	113	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@133	114	for (int i = 0; i < superIO.Fans.Length; i++)
moel@133	115	f.Add(new Fan("Fan #" + (i + 1), i));
moel@133	116	break;
moel@133	117	}
moel@133	118	break;
moel@130	119	case Manufacturer.DFI:
moel@130	120	switch (model) {
moel@168	121	case Model.LP_BI_P45_T2RS_Elite: // IT8718F
moel@130	122	v.Add(new Voltage("CPU VCore", 0));
moel@130	123	v.Add(new Voltage("FSB VTT", 1));
moel@130	124	v.Add(new Voltage("+3.3V", 2));
moel@130	125	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@130	126	v.Add(new Voltage("+12V", 4, 30, 10, 0));
moel@130	127	v.Add(new Voltage("NB Core", 5));
moel@130	128	v.Add(new Voltage("VDIMM", 6));
moel@130	129	v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0));
moel@130	130	v.Add(new Voltage("VBat", 8));
moel@130	131	t.Add(new Temperature("CPU", 0));
moel@130	132	t.Add(new Temperature("System", 1));
moel@130	133	t.Add(new Temperature("Chipset", 2));
moel@130	134	f.Add(new Fan("Fan #1", 0));
moel@130	135	f.Add(new Fan("Fan #2", 1));
moel@130	136	f.Add(new Fan("Fan #3", 2));
moel@130	137	break;
moel@168	138	case Model.LP_DK_P55_T3eH9: // IT8720F
moel@130	139	v.Add(new Voltage("CPU VCore", 0));
moel@130	140	v.Add(new Voltage("VTT", 1));
moel@130	141	v.Add(new Voltage("+3.3V", 2));
moel@130	142	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@130	143	v.Add(new Voltage("+12V", 4, 30, 10, 0));
moel@130	144	v.Add(new Voltage("CPU PLL", 5));
moel@130	145	v.Add(new Voltage("DRAM", 6));
moel@130	146	v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0));
moel@130	147	v.Add(new Voltage("VBat", 8));
moel@130	148	t.Add(new Temperature("Chipset", 0));
moel@130	149	t.Add(new Temperature("CPU PWM", 1));
moel@130	150	t.Add(new Temperature("CPU", 2));
moel@130	151	f.Add(new Fan("Fan #1", 0));
moel@130	152	f.Add(new Fan("Fan #2", 1));
moel@130	153	f.Add(new Fan("Fan #3", 2));
moel@130	154	break;
moel@130	155	default:
moel@130	156	v.Add(new Voltage("CPU VCore", 0));
moel@130	157	v.Add(new Voltage("VTT", 1, true));
moel@130	158	v.Add(new Voltage("+3.3V", 2, true));
moel@130	159	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130	160	v.Add(new Voltage("+12V", 4, 30, 10, 0, true));
moel@130	161	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	162	v.Add(new Voltage("DRAM", 6, true));
moel@130	163	v.Add(new Voltage("+5VSB", 7, 6.8f, 10, 0, true));
moel@130	164	v.Add(new Voltage("VBat", 8));
moel@130	165	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	166	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	167	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	168	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	169	break;
moel@130	170	}
moel@130	171	break;
moel@130	172
moel@130	173	case Manufacturer.Gigabyte:
moel@130	174	switch (model) {
moel@168	175	case Model._965P_S3: // IT8718F
moel@130	176	v.Add(new Voltage("CPU VCore", 0));
moel@130	177	v.Add(new Voltage("DRAM", 1));
moel@130	178	v.Add(new Voltage("+3.3V", 2));
moel@130	179	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@130	180	v.Add(new Voltage("+12V", 7, 27, 9.1f, 0));
moel@130	181	v.Add(new Voltage("VBat", 8));
moel@130	182	t.Add(new Temperature("System", 0));
moel@130	183	t.Add(new Temperature("CPU", 1));
moel@130	184	f.Add(new Fan("CPU Fan", 0));
moel@130	185	f.Add(new Fan("System Fan", 1));
moel@130	186	break;
moel@168	187	case Model.EP45_DS3R: // IT8718F
moel@130	188	case Model.EP45_UD3R:
moel@138	189	case Model.X38_DS5:
moel@130	190	v.Add(new Voltage("CPU VCore", 0));
moel@130	191	v.Add(new Voltage("DRAM", 1));
moel@130	192	v.Add(new Voltage("+3.3V", 2));
moel@130	193	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@130	194	v.Add(new Voltage("+12V", 7, 27, 9.1f, 0));
moel@130	195	v.Add(new Voltage("VBat", 8));
moel@130	196	t.Add(new Temperature("System", 0));
moel@130	197	t.Add(new Temperature("CPU", 1));
moel@130	198	f.Add(new Fan("CPU Fan", 0));
moel@130	199	f.Add(new Fan("System Fan #2", 1));
moel@130	200	f.Add(new Fan("Power Fan", 2));
moel@130	201	f.Add(new Fan("System Fan #1", 3));
moel@130	202	break;
moel@168	203	case Model.EX58_EXTREME: // IT8720F
moel@133	204	v.Add(new Voltage("CPU VCore", 0));
moel@133	205	v.Add(new Voltage("DRAM", 1));
moel@133	206	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@133	207	v.Add(new Voltage("VBat", 8));
moel@133	208	t.Add(new Temperature("System", 0));
moel@133	209	t.Add(new Temperature("CPU", 1));
moel@138	210	t.Add(new Temperature("Northbridge", 2));
moel@133	211	f.Add(new Fan("CPU Fan", 0));
moel@133	212	f.Add(new Fan("System Fan #2", 1));
moel@133	213	f.Add(new Fan("Power Fan", 2));
moel@133	214	f.Add(new Fan("System Fan #1", 3));
moel@133	215	break;
moel@168	216	case Model.P35_DS3: // IT8718F
moel@168	217	case Model.P35_DS3L: // IT8718F
moel@130	218	v.Add(new Voltage("CPU VCore", 0));
moel@130	219	v.Add(new Voltage("DRAM", 1));
moel@130	220	v.Add(new Voltage("+3.3V", 2));
moel@130	221	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@130	222	v.Add(new Voltage("+12V", 7, 27, 9.1f, 0));
moel@130	223	v.Add(new Voltage("VBat", 8));
moel@130	224	t.Add(new Temperature("System", 0));
moel@130	225	t.Add(new Temperature("CPU", 1));
moel@130	226	f.Add(new Fan("CPU Fan", 0));
moel@130	227	f.Add(new Fan("System Fan #1", 1));
moel@130	228	f.Add(new Fan("System Fan #2", 2));
moel@130	229	f.Add(new Fan("Power Fan", 3));
moel@130	230	break;
moel@168	231	case Model.P55_UD4: // IT8720F
moel@168	232	case Model.P55M_UD4: // IT8720F
moel@148	233	v.Add(new Voltage("CPU VCore", 0));
moel@148	234	v.Add(new Voltage("DRAM", 1));
moel@148	235	v.Add(new Voltage("+3.3V", 2));
moel@148	236	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@148	237	v.Add(new Voltage("+12V", 5, 27, 9.1f, 0));
moel@148	238	v.Add(new Voltage("VBat", 8));
moel@148	239	t.Add(new Temperature("System", 0));
moel@148	240	t.Add(new Temperature("CPU", 2));
moel@148	241	f.Add(new Fan("CPU Fan", 0));
moel@148	242	f.Add(new Fan("System Fan #2", 1));
moel@148	243	f.Add(new Fan("Power Fan", 2));
moel@148	244	f.Add(new Fan("System Fan #1", 3));
moel@148	245	break;
moel@168	246	case Model.GA_MA770T_UD3: // IT8720F
moel@154	247	v.Add(new Voltage("CPU VCore", 0));
moel@154	248	v.Add(new Voltage("DRAM", 1));
moel@154	249	v.Add(new Voltage("+3.3V", 2));
moel@154	250	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@154	251	v.Add(new Voltage("+12V", 4, 27, 9.1f, 0));
moel@154	252	v.Add(new Voltage("VBat", 8));
moel@154	253	t.Add(new Temperature("System", 0));
moel@154	254	t.Add(new Temperature("CPU", 1));
moel@154	255	f.Add(new Fan("CPU Fan", 0));
moel@154	256	f.Add(new Fan("System Fan #1", 1));
moel@154	257	f.Add(new Fan("System Fan #2", 2));
moel@154	258	f.Add(new Fan("Power Fan", 3));
moel@154	259	break;
moel@168	260	case Model.GA_MA785GMT_UD2H: // IT8718F
moel@130	261	v.Add(new Voltage("CPU VCore", 0));
moel@130	262	v.Add(new Voltage("DRAM", 1));
moel@130	263	v.Add(new Voltage("+3.3V", 2));
moel@130	264	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@130	265	v.Add(new Voltage("+12V", 4, 27, 9.1f, 0));
moel@130	266	v.Add(new Voltage("VBat", 8));
moel@130	267	t.Add(new Temperature("System", 0));
moel@130	268	t.Add(new Temperature("CPU", 1));
moel@130	269	f.Add(new Fan("CPU Fan", 0));
moel@130	270	f.Add(new Fan("System Fan", 1));
moel@130	271	f.Add(new Fan("NB Fan", 2));
moel@130	272	break;
moel@168	273	case Model.X58A_UD3R: // IT8720F
moel@138	274	v.Add(new Voltage("CPU VCore", 0));
moel@138	275	v.Add(new Voltage("DRAM", 1));
moel@138	276	v.Add(new Voltage("+3.3V", 2));
moel@138	277	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0));
moel@138	278	v.Add(new Voltage("+12V", 5, 27, 9.1f, 0));
moel@138	279	v.Add(new Voltage("VBat", 8));
moel@138	280	t.Add(new Temperature("System", 0));
moel@138	281	t.Add(new Temperature("CPU", 1));
moel@138	282	t.Add(new Temperature("Northbridge", 2));
moel@138	283	f.Add(new Fan("CPU Fan", 0));
moel@138	284	f.Add(new Fan("System Fan #2", 1));
moel@138	285	f.Add(new Fan("Power Fan", 2));
moel@138	286	f.Add(new Fan("System Fan #1", 3));
moel@138	287	break;
moel@130	288	default:
moel@130	289	v.Add(new Voltage("CPU VCore", 0));
moel@130	290	v.Add(new Voltage("DRAM", 1, true));
moel@130	291	v.Add(new Voltage("+3.3V", 2, true));
moel@130	292	v.Add(new Voltage("+5V", 3, 6.8f, 10, 0, true));
moel@130	293	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	294	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	295	v.Add(new Voltage("Voltage #7", 6, true));
moel@130	296	v.Add(new Voltage("+12V", 7, 27, 9.1f, 0, true));
moel@130	297	v.Add(new Voltage("VBat", 8));
moel@130	298	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	299	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	300	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	301	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	302	break;
moel@130	303	}
moel@130	304	break;
moel@130	305
moel@130	306	default:
moel@130	307	v.Add(new Voltage("CPU VCore", 0));
moel@130	308	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	309	v.Add(new Voltage("Voltage #3", 2, true));
moel@130	310	v.Add(new Voltage("Voltage #4", 3, true));
moel@130	311	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	312	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	313	v.Add(new Voltage("Voltage #7", 6, true));
moel@130	314	v.Add(new Voltage("Voltage #8", 7, true));
moel@130	315	v.Add(new Voltage("VBat", 8));
moel@130	316	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	317	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	318	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	319	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	320	break;
moel@130	321	}
moel@130	322	break;
moel@170	323
moel@170	324	case Chip.IT8721F:
moel@177	325	switch (manufacturer) {
moel@177	326	case Manufacturer.ECS:
moel@177	327	switch (model) {
moel@177	328	case Model.A890GXM_A: // IT8721F
moel@177	329	v.Add(new Voltage("CPU VCore", 0));
moel@177	330	v.Add(new Voltage("VDIMM", 1));
moel@177	331	v.Add(new Voltage("NB Voltage", 2));
moel@177	332	v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0));
moel@177	333	// v.Add(new Voltage("VDIMM", 6, true));
moel@177	334	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0));
moel@177	335	v.Add(new Voltage("VBat", 8, 10, 10, 0));
moel@177	336	t.Add(new Temperature("CPU", 0));
moel@177	337	t.Add(new Temperature("System", 1));
moel@177	338	t.Add(new Temperature("Northbridge", 2));
moel@177	339	f.Add(new Fan("CPU Fan", 0));
moel@177	340	f.Add(new Fan("System Fan", 1));
moel@177	341	f.Add(new Fan("Power Fan", 2));
moel@177	342	break;
moel@177	343	default:
moel@177	344	v.Add(new Voltage("Voltage #1", 0, true));
moel@177	345	v.Add(new Voltage("Voltage #2", 1, true));
moel@177	346	v.Add(new Voltage("Voltage #3", 2, true));
moel@177	347	v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));
moel@177	348	v.Add(new Voltage("Voltage #5", 4, true));
moel@177	349	v.Add(new Voltage("Voltage #6", 5, true));
moel@177	350	v.Add(new Voltage("Voltage #7", 6, true));
moel@177	351	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@177	352	v.Add(new Voltage("VBat", 8, 10, 10, 0));
moel@177	353	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177	354	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177	355	for (int i = 0; i < superIO.Fans.Length; i++)
moel@177	356	f.Add(new Fan("Fan #" + (i + 1), i));
moel@177	357	break;
moel@177	358	}
moel@177	359	break;
moel@177	360	default:
moel@177	361	v.Add(new Voltage("Voltage #1", 0, true));
moel@177	362	v.Add(new Voltage("Voltage #2", 1, true));
moel@177	363	v.Add(new Voltage("Voltage #3", 2, true));
moel@177	364	v.Add(new Voltage("Analog +3.3V", 3, 10, 10, 0, true));
moel@177	365	v.Add(new Voltage("Voltage #5", 4, true));
moel@177	366	v.Add(new Voltage("Voltage #6", 5, true));
moel@177	367	v.Add(new Voltage("Voltage #7", 6, true));
moel@177	368	v.Add(new Voltage("Standby +3.3V", 7, 10, 10, 0, true));
moel@177	369	v.Add(new Voltage("VBat", 8, 10, 10, 0));
moel@177	370	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@177	371	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@177	372	for (int i = 0; i < superIO.Fans.Length; i++)
moel@177	373	f.Add(new Fan("Fan #" + (i + 1), i));
moel@177	374	break;
moel@177	375	}
moel@170	376	break;
moel@130	377
moel@130	378	case Chip.F71858:
moel@132	379	v.Add(new Voltage("VCC3V", 0, 150, 150, 0));
moel@132	380	v.Add(new Voltage("VSB3V", 1, 150, 150, 0));
moel@132	381	v.Add(new Voltage("Battery", 2, 150, 150, 0));
moel@130	382	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	383	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	384	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	385	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	386	break;
moel@130	387	case Chip.F71862:
moel@130	388	case Chip.F71869:
moel@130	389	case Chip.F71882:
moel@130	390	case Chip.F71889ED:
moel@130	391	case Chip.F71889F:
moel@132	392	switch (manufacturer) {
moel@132	393	case Manufacturer.EVGA:
moel@132	394	switch (model) {
moel@168	395	case Model.X58_SLI_Classified: // F71882
moel@132	396	v.Add(new Voltage("VCC3V", 0, 150, 150, 0));
moel@132	397	v.Add(new Voltage("CPU VCore", 1, 47, 100, 0));
moel@132	398	v.Add(new Voltage("DIMM", 2, 47, 100, 0));
moel@132	399	v.Add(new Voltage("CPU VTT", 3, 24, 100, 0));
moel@132	400	v.Add(new Voltage("IOH Vcore", 4, 24, 100, 0));
moel@132	401	v.Add(new Voltage("+5V", 5, 51, 12, 0));
moel@132	402	v.Add(new Voltage("+12V", 6, 56, 6.8f, 0));
moel@132	403	v.Add(new Voltage("3VSB", 7, 150, 150, 0));
moel@132	404	v.Add(new Voltage("VBat", 8, 150, 150, 0));
moel@132	405	t.Add(new Temperature("CPU", 0));
moel@132	406	t.Add(new Temperature("VREG", 1));
moel@132	407	t.Add(new Temperature("System", 2));
moel@132	408	f.Add(new Fan("CPU Fan", 0));
moel@132	409	f.Add(new Fan("Power Fan", 1));
moel@132	410	f.Add(new Fan("Chassis Fan", 2));
moel@132	411	break;
moel@132	412	default:
moel@132	413	v.Add(new Voltage("VCC3V", 0, 150, 150, 0));
moel@132	414	v.Add(new Voltage("CPU VCore", 1));
moel@132	415	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	416	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	417	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	418	v.Add(new Voltage("Voltage #6", 5, true));
moel@132	419	v.Add(new Voltage("Voltage #7", 6, true));
moel@132	420	v.Add(new Voltage("VSB3V", 7, 150, 150, 0));
moel@132	421	v.Add(new Voltage("VBat", 8, 150, 150, 0));
moel@132	422	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	423	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	424	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	425	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	426	break;
moel@132	427	}
moel@132	428	break;
moel@132	429	default:
moel@132	430	v.Add(new Voltage("VCC3V", 0, 150, 150, 0));
moel@132	431	v.Add(new Voltage("CPU VCore", 1));
moel@132	432	v.Add(new Voltage("Voltage #3", 2, true));
moel@132	433	v.Add(new Voltage("Voltage #4", 3, true));
moel@132	434	v.Add(new Voltage("Voltage #5", 4, true));
moel@132	435	v.Add(new Voltage("Voltage #6", 5, true));
moel@132	436	v.Add(new Voltage("Voltage #7", 6, true));
moel@132	437	v.Add(new Voltage("VSB3V", 7, 150, 150, 0));
moel@132	438	v.Add(new Voltage("VBat", 8, 150, 150, 0));
moel@132	439	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@132	440	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@132	441	for (int i = 0; i < superIO.Fans.Length; i++)
moel@132	442	f.Add(new Fan("Fan #" + (i + 1), i));
moel@132	443	break;
moel@132	444	}
moel@130	445	break;
moel@130	446
moel@130	447	case Chip.W83627EHF:
moel@130	448	v.Add(new Voltage("CPU VCore", 0));
moel@130	449	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	450	v.Add(new Voltage("AVCC", 2, 34, 34, 0));
moel@130	451	v.Add(new Voltage("3VCC", 3, 34, 34, 0));
moel@130	452	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	453	v.Add(new Voltage("Voltage #6", 5, true));
moel@130	454	v.Add(new Voltage("Voltage #7", 6, true));
moel@130	455	v.Add(new Voltage("3VSB", 7, 34, 34, 0));
moel@130	456	v.Add(new Voltage("VBAT", 8, 34, 34, 0));
moel@130	457	v.Add(new Voltage("Voltage #10", 9, true));
moel@130	458	t.Add(new Temperature("CPU", 0));
moel@130	459	t.Add(new Temperature("Auxiliary", 1));
moel@130	460	t.Add(new Temperature("System", 2));
moel@153	461	f.Add(new Fan("System Fan", 0));
moel@153	462	f.Add(new Fan("CPU Fan", 1));
moel@153	463	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	464	f.Add(new Fan("CPU Fan #2", 3));
moel@153	465	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@130	466	break;
moel@130	467	case Chip.W83627DHG:
moel@130	468	case Chip.W83627DHGP:
moel@130	469	case Chip.W83667HG:
moel@130	470	case Chip.W83667HGB:
moel@152	471	switch (manufacturer) {
moel@153	472	case Manufacturer.ASRock:
moel@153	473	switch (model) {
moel@168	474	case Model._880GMH_USB3: // W83627DHG-P
moel@153	475	v.Add(new Voltage("CPU VCore", 0));
moel@153	476	v.Add(new Voltage("+3.3V", 3, 34, 34, 0));
moel@153	477	v.Add(new Voltage("+5V", 5, 15, 7.5f, 0));
moel@153	478	v.Add(new Voltage("+12V", 6, 56, 10, 0));
moel@153	479	v.Add(new Voltage("Standby +3.3V", 7, 34, 34, 0));
moel@153	480	v.Add(new Voltage("VBAT", 8, 34, 34, 0));
moel@153	481	t.Add(new Temperature("CPU", 0));
moel@153	482	t.Add(new Temperature("Motherboard", 2));
moel@153	483	f.Add(new Fan("Chassis Fan", 0));
moel@153	484	f.Add(new Fan("CPU Fan", 1));
moel@153	485	f.Add(new Fan("Power Fan", 2));
moel@153	486	break;
moel@153	487	default:
moel@153	488	v.Add(new Voltage("CPU VCore", 0));
moel@153	489	v.Add(new Voltage("Voltage #2", 1, true));
moel@153	490	v.Add(new Voltage("AVCC", 2, 34, 34, 0));
moel@153	491	v.Add(new Voltage("3VCC", 3, 34, 34, 0));
moel@153	492	v.Add(new Voltage("Voltage #5", 4, true));
moel@153	493	v.Add(new Voltage("Voltage #6", 5, true));
moel@153	494	v.Add(new Voltage("Voltage #7", 6, true));
moel@153	495	v.Add(new Voltage("3VSB", 7, 34, 34, 0));
moel@153	496	v.Add(new Voltage("VBAT", 8, 34, 34, 0));
moel@153	497	t.Add(new Temperature("CPU", 0));
moel@153	498	t.Add(new Temperature("Auxiliary", 1));
moel@153	499	t.Add(new Temperature("System", 2));
moel@153	500	f.Add(new Fan("System Fan", 0));
moel@153	501	f.Add(new Fan("CPU Fan", 1));
moel@153	502	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	503	f.Add(new Fan("CPU Fan #2", 3));
moel@153	504	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@153	505	break;
moel@153	506	}
moel@153	507	break;
moel@152	508	case Manufacturer.ASUS:
moel@152	509	switch (model) {
moel@174	510	case Model.P6X58D_E: // W83667HG
moel@174	511	case Model.Rampage_II_GENE: // W83667HG
moel@152	512	v.Add(new Voltage("CPU VCore", 0));
moel@152	513	v.Add(new Voltage("+12V", 1, 11.5f, 1.91f, 0));
moel@152	514	v.Add(new Voltage("Analog +3.3V", 2, 34, 34, 0));
moel@152	515	v.Add(new Voltage("+3.3V", 3, 34, 34, 0));
moel@153	516	v.Add(new Voltage("+5V", 4, 15, 7.5f, 0));
moel@174	517	v.Add(new Voltage("Standby +3.3V", 7, 34, 34, 0));
moel@174	518	v.Add(new Voltage("VBAT", 8, 34, 34, 0));
moel@174	519	t.Add(new Temperature("CPU", 0));
moel@174	520	t.Add(new Temperature("Motherboard", 2));
moel@174	521	f.Add(new Fan("Chassis Fan #1", 0));
moel@174	522	f.Add(new Fan("CPU Fan", 1));
moel@174	523	f.Add(new Fan("Power Fan", 2));
moel@174	524	f.Add(new Fan("Chassis Fan #2", 3));
moel@174	525	f.Add(new Fan("Chassis Fan #3", 4));
moel@174	526	break;
moel@174	527	case Model.Rampage_Extreme: // W83667HG
moel@174	528	v.Add(new Voltage("CPU VCore", 0));
moel@174	529	v.Add(new Voltage("+12V", 1, 12, 2, 0));
moel@174	530	v.Add(new Voltage("Analog +3.3V", 2, 34, 34, 0));
moel@174	531	v.Add(new Voltage("+3.3V", 3, 34, 34, 0));
moel@174	532	v.Add(new Voltage("+5V", 4, 15, 7.5f, 0));
moel@152	533	v.Add(new Voltage("Standby +3.3V", 7, 34, 34, 0));
moel@152	534	v.Add(new Voltage("VBAT", 8, 34, 34, 0));
moel@152	535	t.Add(new Temperature("CPU", 0));
moel@152	536	t.Add(new Temperature("Motherboard", 2));
moel@152	537	f.Add(new Fan("Chassis Fan #1", 0));
moel@153	538	f.Add(new Fan("CPU Fan", 1));
moel@153	539	f.Add(new Fan("Power Fan", 2));
moel@152	540	f.Add(new Fan("Chassis Fan #2", 3));
moel@152	541	f.Add(new Fan("Chassis Fan #3", 4));
moel@152	542	break;
moel@152	543	default:
moel@152	544	v.Add(new Voltage("CPU VCore", 0));
moel@152	545	v.Add(new Voltage("Voltage #2", 1, true));
moel@152	546	v.Add(new Voltage("AVCC", 2, 34, 34, 0));
moel@152	547	v.Add(new Voltage("3VCC", 3, 34, 34, 0));
moel@152	548	v.Add(new Voltage("Voltage #5", 4, true));
moel@152	549	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	550	v.Add(new Voltage("Voltage #7", 6, true));
moel@152	551	v.Add(new Voltage("3VSB", 7, 34, 34, 0));
moel@152	552	v.Add(new Voltage("VBAT", 8, 34, 34, 0));
moel@152	553	t.Add(new Temperature("CPU", 0));
moel@152	554	t.Add(new Temperature("Auxiliary", 1));
moel@152	555	t.Add(new Temperature("System", 2));
moel@153	556	f.Add(new Fan("System Fan", 0));
moel@153	557	f.Add(new Fan("CPU Fan", 1));
moel@153	558	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	559	f.Add(new Fan("CPU Fan #2", 3));
moel@153	560	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152	561	break;
moel@152	562	}
moel@152	563	break;
moel@152	564	default:
moel@152	565	v.Add(new Voltage("CPU VCore", 0));
moel@152	566	v.Add(new Voltage("Voltage #2", 1, true));
moel@152	567	v.Add(new Voltage("AVCC", 2, 34, 34, 0));
moel@152	568	v.Add(new Voltage("3VCC", 3, 34, 34, 0));
moel@152	569	v.Add(new Voltage("Voltage #5", 4, true));
moel@152	570	v.Add(new Voltage("Voltage #6", 5, true));
moel@152	571	v.Add(new Voltage("Voltage #7", 6, true));
moel@152	572	v.Add(new Voltage("3VSB", 7, 34, 34, 0));
moel@152	573	v.Add(new Voltage("VBAT", 8, 34, 34, 0));
moel@152	574	t.Add(new Temperature("CPU", 0));
moel@152	575	t.Add(new Temperature("Auxiliary", 1));
moel@152	576	t.Add(new Temperature("System", 2));
moel@153	577	f.Add(new Fan("System Fan", 0));
moel@153	578	f.Add(new Fan("CPU Fan", 1));
moel@153	579	f.Add(new Fan("Auxiliary Fan", 2));
moel@153	580	f.Add(new Fan("CPU Fan #2", 3));
moel@153	581	f.Add(new Fan("Auxiliary Fan #2", 4));
moel@152	582	break;
moel@152	583	}
moel@130	584	break;
moel@130	585	case Chip.W83627HF:
moel@130	586	case Chip.W83627THF:
moel@130	587	case Chip.W83687THF:
moel@130	588	v.Add(new Voltage("CPU VCore", 0));
moel@130	589	v.Add(new Voltage("Voltage #2", 1, true));
moel@130	590	v.Add(new Voltage("Voltage #3", 2, true));
moel@130	591	v.Add(new Voltage("AVCC", 3, 34, 51, 0));
moel@130	592	v.Add(new Voltage("Voltage #5", 4, true));
moel@130	593	v.Add(new Voltage("5VSB", 5, 34, 51, 0));
moel@130	594	v.Add(new Voltage("VBAT", 6));
moel@130	595	t.Add(new Temperature("CPU", 0));
moel@130	596	t.Add(new Temperature("Auxiliary", 1));
moel@130	597	t.Add(new Temperature("System", 2));
moel@153	598	f.Add(new Fan("System Fan", 0));
moel@153	599	f.Add(new Fan("CPU Fan", 1));
moel@153	600	f.Add(new Fan("Auxiliary Fan", 2));
moel@130	601	break;
moel@130	602	default:
moel@130	603	for (int i = 0; i < superIO.Voltages.Length; i++)
moel@130	604	v.Add(new Voltage("Voltage #" + (i + 1), i, true));
moel@130	605	for (int i = 0; i < superIO.Temperatures.Length; i++)
moel@130	606	t.Add(new Temperature("Temperature #" + (i + 1), i));
moel@130	607	for (int i = 0; i < superIO.Fans.Length; i++)
moel@130	608	f.Add(new Fan("Fan #" + (i + 1), i));
moel@130	609	break;
moel@130	610	}
moel@130	611
moel@130	612	string formula = "Voltage = value + (value - Vf) * Ri / Rf.";
moel@130	613	foreach (Voltage voltage in v)
moel@130	614	if (voltage.Index < superIO.Voltages.Length) {
moel@130	615	Sensor sensor = new Sensor(voltage.Name, voltage.Index,
moel@134	616	voltage.Hidden, SensorType.Voltage, this,
moel@130	617	new ParameterDescription[] {
moel@130	618	new ParameterDescription("Ri [kΩ]", "Input resistance.\n" +
moel@130	619	formula, voltage.Ri),
moel@130	620	new ParameterDescription("Rf [kΩ]", "Reference resistance.\n" +
moel@130	621	formula, voltage.Rf),
moel@130	622	new ParameterDescription("Vf [V]", "Reference voltage.\n" +
moel@130	623	formula, voltage.Vf)
moel@165	624	}, settings);
moel@130	625	voltages.Add(sensor);
moel@130	626	}
moel@130	627
moel@130	628	foreach (Temperature temperature in t)
moel@130	629	if (temperature.Index < superIO.Temperatures.Length) {
moel@134	630	Sensor sensor = new Sensor(temperature.Name, temperature.Index,
moel@130	631	SensorType.Temperature, this, new ParameterDescription[] {
moel@130	632	new ParameterDescription("Offset [°C]", "Temperature offset.", 0)
moel@165	633	}, settings);
moel@130	634	temperatures.Add(sensor);
moel@130	635	}
moel@130	636
moel@130	637	foreach (Fan fan in f)
moel@130	638	if (fan.Index < superIO.Fans.Length) {
moel@134	639	Sensor sensor = new Sensor(fan.Name, fan.Index, SensorType.Fan,
moel@165	640	this, settings);
moel@130	641	fans.Add(sensor);
moel@130	642	}
moel@130	643	}
moel@130	644
moel@130	645	public override Identifier Identifier {
moel@166	646	get {
moel@166	647	return new Identifier("lpc",
moel@166	648	superIO.Chip.ToString().ToLower(CultureInfo.InvariantCulture));
moel@166	649	}
moel@130	650	}
moel@130	651
moel@165	652	public override HardwareType HardwareType {
moel@165	653	get { return HardwareType.SuperIO; }
moel@130	654	}
moel@130	655
moel@176	656	public override IHardware Parent {
moel@176	657	get { return mainboard; }
moel@176	658	}
moel@176	659
moel@130	660	public override string Name {
moel@130	661	get { return name; }
moel@130	662	}
moel@130	663
moel@130	664	public override string GetReport() {
moel@130	665	return superIO.GetReport();
moel@130	666	}
moel@130	667
moel@130	668	public override void Update() {
moel@130	669	superIO.Update();
moel@130	670
moel@130	671	foreach (Sensor sensor in voltages) {
moel@130	672	float? value = superIO.Voltages[sensor.Index];
moel@130	673	if (value.HasValue) {
moel@130	674	sensor.Value = value + (value - sensor.Parameters[2].Value) *
moel@130	675	sensor.Parameters[0].Value / sensor.Parameters[1].Value;
moel@130	676	ActivateSensor(sensor);
moel@130	677	}
moel@130	678	}
moel@130	679
moel@130	680	foreach (Sensor sensor in temperatures) {
moel@130	681	float? value = superIO.Temperatures[sensor.Index];
moel@130	682	if (value.HasValue) {
moel@130	683	sensor.Value = value + sensor.Parameters[0].Value;
moel@130	684	ActivateSensor(sensor);
moel@130	685	}
moel@130	686	}
moel@130	687
moel@130	688	foreach (Sensor sensor in fans) {
moel@130	689	float? value = superIO.Fans[sensor.Index];
moel@130	690	if (value.HasValue) {
moel@130	691	sensor.Value = value;
moel@130	692	if (value.Value > 0)
moel@130	693	ActivateSensor(sensor);
moel@130	694	}
moel@130	695	}
moel@130	696	}
moel@130	697
moel@130	698	private class Voltage {
moel@130	699	public readonly string Name;
moel@130	700	public readonly int Index;
moel@130	701	public readonly float Ri;
moel@130	702	public readonly float Rf;
moel@130	703	public readonly float Vf;
moel@130	704	public readonly bool Hidden;
moel@130	705
moel@130	706	public Voltage(string name, int index) :
moel@130	707	this(name, index, 0, 1, 0, false) { }
moel@130	708
moel@130	709	public Voltage(string name, int index, bool hidden) :
moel@130	710	this(name, index, 0, 1, 0, hidden) { }
moel@130	711
moel@130	712	public Voltage(string name, int index, float ri, float rf, float vf) :
moel@130	713	this(name, index, ri, rf, vf, false) { }
moel@130	714
moel@130	715	public Voltage(string name, int index, float ri, float rf, float vf,
moel@130	716	bool hidden) {
moel@130	717	this.Name = name;
moel@130	718	this.Index = index;
moel@130	719	this.Ri = ri;
moel@130	720	this.Rf = rf;
moel@130	721	this.Vf = vf;
moel@130	722	this.Hidden = hidden;
moel@130	723	}
moel@130	724	}
moel@130	725
moel@130	726	private class Temperature {
moel@130	727	public readonly string Name;
moel@130	728	public readonly int Index;
moel@130	729
moel@167	730	public Temperature(string name, int index) {
moel@130	731	this.Name = name;
moel@130	732	this.Index = index;
moel@130	733	}
moel@130	734	}
moel@130	735
moel@130	736	private class Fan {
moel@130	737	public readonly string Name;
moel@130	738	public readonly int Index;
moel@130	739
moel@130	740	public Fan(string name, int index) {
moel@130	741	this.Name = name;
moel@130	742	this.Index = index;
moel@130	743	}
moel@130	744	}
moel@130	745	}
moel@130	746	}

author	moel.mich
	Wed, 08 Sep 2010 19:29:58 +0000
changeset 182	4801e9eaf979
parent 177	510f27ad65ac
child 195	0ee888c485d5
permissions	-rw-r--r--